Need a schematic diagram for a ninja pro 1100 blender

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Corey Knoettgen

• 8596 Answers

SOURCE: need a schematic diagram for a kitchen blender

I think this will help a bit (p.2 only), although it seems a little crude to be a full service manual - this is a service manual for an Oster "Osterizer" Blender - one of the classics:
http://www.villaware.com/manuals/ProductService/Service/Sunbeam/4112.8.pdf

Here is one for a Philips blender, but once again, not as detailed as I've ever seen:
http://www.eserviceinfo.com/download.php?fileid=27616

These are the free one I could find. Generally, an authorized servicer is not allowed to distribute a full service manual, so you normally have to pay someone to get a complete service manual.

-Tha Mp3 Doctor

Posted on Apr 02, 2009

SOURCE: need instruction manual for Ninja Kitchen System 1100

Hi Camilla,
Here's the manual in pdf.

Hope this helps.Thanks!

Posted on Dec 24, 2011

odiebugs

• 949 Answers

SOURCE: Blades on ninja blender won't spin, but motor seems to be working.

I don't have one, but inspect the shaft, it looks like there is a key on the shaft, then inspect the inside of the blade where it goes on top of the shaft, see if it looks like the shaft has spun out the blade and this is why it's not spinning.

Remove the blade and the container, then turn on and see if the shaft is spinning, it should be most are a direct drive.

So now if the shaft is spinning, that most likely means that the blade hole is broke where it sets on top of the shaft.

Look closely at the inside of the blade, you should see some type of damage like the groves are worn, I hate to see you buy one and it was the shaft that wore, but usually the blade will go first.

Posted on Mar 31, 2013

mcgrant

• 61 Answers

SOURCE: I do not have the Ninja NJ600 Pro Blender. I have

I need more information to help you
The model number is displayed on the product's rating label on the bottom or backside of the unit.

If you have give me all of the info I should be able to get you your information

Posted on Oct 24, 2013