- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It would be nice to know what the manufacturer is. If someone has changed the password and you don't know what it is, there is nothing you can do except reset it back to factory specs. Also you should know that most routers have to be connected with a network cable to a computer in order to change settings.
You can reset TV to factory specs by holding Volume Down button on the set and pressing Menu button on remote. Hold for 15 seconds. Wait until done and you'll have to hold the Power button on the set down until it turns off. This clears the password XXXXX resets to factory settings.
You my friend are up the creek without a paddle. How could you forget the Hard Drive Password? Oh I know, it's a stolen laptop. If you're smart enough to set a password on the hard drive, then you're smart enough to remember it. 99% of computers with passwords on the hard drive and the person that has the laptop doesn't know the password, either stole it or bought it hot off the streets. The real owner set the password to keep thieves from getting to sensitive data if it is ever stolen. They might have even set the password remotely once it was stolen. The laptop is useless unless the real owner puts the password in to unlock it.
Well you can reset your windows 7 password to log on the windows with the newly created password. And so many methods can help you ,such as the easiest way is use Windows Password Reset, or reset in safe mode ect.
connect an ethernet cable to your router from pc. open IE, type 192.168.0.1 , it will ask for a user name and password, once you enter your user name and password, it will pull up the DLINK software, GUI. where you can go to wireless settings and change it to secured network.
if you dont know your username and password, follow this steps:
Step 1 With the unit on, place a paper clip into the hole on the back on the unit labeled Reset.
Step 2 Hold paper clip down for 10 seconds and release.
Note: Do not repower unit during this procedure.
Step 3 The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.
Resetting the router does not reset the firmware to an earlier version. It will change all settings back to factory defaults.
Note:The factory defaults username is admin, and there is no password.
Basically all it takes to restore the TV to factory setting is to unplug the TV from power and all connecting cables for about 3-5 hours (depending upon your model). This is called a Hard Reset and should restore the TV back to factory defaults.