Question about Samsung SGH Cell Phones

Open Question

Why won't my power button work?

Sometimes my power button works but most of the time it dont, what do I need to do?

Posted by on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

trinidaddy1

  • 122 Answers

SOURCE: power windows and radio sometimes dont work

check the wire connections for propper connection sounds like they aren't making it all the way

Posted on Jun 07, 2009

Ad
SD Tech

SD Tech

  • 14553 Answers

SOURCE: power button on my rca tv wont turn on sometimes

A number of possible reasons for this---failing part in set or even bad connections on main board in the set----model listed is prone to going dead with high pitched squeel etc.

Posted on Nov 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Optiplex 780 will not boot 1 3 lights blinking Power Button.


check power supply ,check on/off switch may need cleaning.
check fans are running ok and thay dont need cleaning.

Mar 12, 2015 | Computers & Internet

1 Answer

I have intermittent problem with two of the four rings - sometimes they work sometimes they don't


see this causes and proceed for fix it. God bless you
Surface Element Switch If the surface element won't work, and there is another element of the same size on the stove, try switching the elements. If it still won't work, the surface element switch is probably defective. The surface element switch can't be tested or repaired, it will have to be replaced.

Surface Element Board If a surface element won't work the surface element board might be defective. Each burner is switched on and off with the help of a relay on the surface element board. If one or more relays has failed the surface element won't work. If two or more burners fail at the same time, this is likely the problem. If only one surface element won't work and the element itself checks out to be good, the surface element board might be defective.

Coil Surface Element If the surface element won't work, the coil surface element might be burned out. Most coil surface elements can be pulled out of their socket and checked with an Ohm meter for continuity. If the surface element won't work, check to see if there is any visible damage to the coils. Also, check to be sure the element is pushed all the way into the socket.

Radiant Surface Element The most common cause when the surface element won't work is the radiant surface element itself. The radiant surface element - or heating element - can burn out similar to a light bulb. If the surface element won't work and it doesn't have continuity, it will need to be replaced. The radiant surface element is not repairable.

Solid Surface Element If the surface element won't work, and the stove has the solid surface element type of heat, it's likely that the solid surface element itself has burned out. The solid surface element works very similarly to other surface elements - inside there is a heating element that glows when electricity is applied to it. As it gets hotter, the heat is transferred to the solid surface element

Terminal Block If a surface element won't work, there may be a problem at the terminal block. The appliance has a power cord which is attached to a terminal block. Over time, the connections at the terminal block can fail and burn open. When this happens, normally all of the surface elements won't work. The solution is to replace any burned wires and replace the terminal block.

Loose or Burnt Wire Connection If surface element won't work, there might be a burnt wire supplying power to the surface element. Sometimes the wire supplying power to the element burns out right near the element itself. Check for this by just looking at the wires leading to the element. If they're burned out it is usually easy to spot.
Incoming Power Problem Although not as common, if the surface element won't work it is possible that the appliance is not receiving proper voltage. Electric ranges require 220 volts of alternating current. If for some reason the appliance is receiving significantly less, the surface element won't work. Check for proper voltage using a volt meter at the socket where the appliance plugs in.

Oct 02, 2012 | Neff Cooktops

1 Answer

Monitor won't switch on properly.


This is a common symptom of failing filter capacitors in the power supply board. Over time as the capacitors start to fail they are not able to buildup and hold a charge like they should. The worse they get the longer the start time will be until one day the unit will not start up at all. The repair is easy to do, it just requires replacing the 5 bad capacitors on the power supply board. Here is a link to a parts kit that shows what needs to be replaced on the board.

http://www.ccl-la.com/catalog/product_info.php?cPath=21_33_68&products_id=222

I hope this helps,
BuddyMc

Jul 19, 2012 | Samsung Computers & Internet

1 Answer

Sometimes nebulizer works ok during day and suddenly will not work, why?


could be the power supply is not efficient, or could be the filter needs to be changed try those, if none of what i said works i would send the product back and request a new one as thats something you dont want to not work when its needed.

Oct 29, 2017 | Pari Health & Beauty

2 Answers

My iphone 4 has been working great, just went to make a call and its dead. Won't turn on?


I am guessing that your phone probably shut itself down to prevent data loss. When was the last time you shut it off by holding the top power button until it says slide to power off and then powering it off? I may be wrong in this but,... Okay, so have the phone unplugged and I want you to press and hold both buttons at the same time, the Top Power and the Home Screen Button and just continue to hold them, sometimes even for like a minute but I'm guessing within like 30 seconds or so the Apple logo will appear then you can release the buttons. If this does work you can prevent this from happening again by power cycling your phone on a daily basis or at least every other day. :-) I hope it helps good luck.

Sep 19, 2011 | Apple iPhone Smartphone

1 Answer

I Have a 94 cherokee country with a 56028297 ecu,it has no power at the grey wire at the ecu,it does flash sometimes and I can hear the relay work sometimes. I can bypass the fuel pump relay circuit and...


If you hear relays clicking sometimes and the jeep won't start, at those times, is the check engine light illuminated on the dash, or not? If no check engine light is on the dash, at times when the jeep won't start, your ecu is in need of repairs. The ecu sends power to the ignition and fuel relays and when the ecu starts to malfunction, the relays usually start clicking.

May 11, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

Only power on/off button works, nothing else works.


there might be a problem with either your phone's software or hardware i dont see other reasons.

Jul 24, 2009 | Motorola Mobility RAZR2 v9 Cell Phone

1 Answer

Power windows and radio sometimes dont work


check the wire connections for propper connection sounds like they aren't making it all the way

Jun 07, 2009 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Felizardo Erilla
Felizardo Erilla

Level 2 Expert

241 Answers

Bill Long

Level 3 Expert

606 Answers

Donni Steen

Level 3 Expert

687 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...