Question about Cuisinart Grind and Brew 10 Cup Coffee Maker

Open Question

I would like to use pre-ground coffee. The grinder runs even when I press the Grind Off button. How do I turn the grinder off?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: coffee maker won't start and just beeps when plugged in

The door on the top is not closed properly. When you open the top door(cover),you will see a button that is located on the top of the grinder cover. that is a switch that tells the coffee maker that the door is closed and can safely make coffee..please check that all parts are in place and top door(cover) is closed comepletly. good luck.

Posted on Jun 26, 2007

Ad

dwaz1

  • 2 Answers

SOURCE: Cuisinart grind and brew 10 cup grinder stopped working

My grind and brew is a little different, but when I have this problem, I havve to remove the beans and vaccuum out the bean reseviour. It gets clogged and then it won't grind.

Posted on Apr 04, 2009

co7196

Ned C Cook

  • 3433 Answers

SOURCE: I have a cuisinart with brew and grind coffee

Stuck? how stuck can it be when it is supposed to be removable? Try turn ing it,

Posted on Sep 24, 2009

m_czopek

  • 2 Answers

SOURCE: DGB-900bc will not grind

I experienced the same problem after many uses. You need to pull the hopper off and clean out the path the grounds take to the filter basket. It is no doubt clogged up. I used compressed air to really clean it out good.

Good Luck

Posted on Aug 31, 2010

MBdoug

  • 2 Answers

SOURCE: We have a Cuisinart DGB-900

try cleaning the grind chute again. if problem persists:
this is a cronic problem with the DGB900BC even after cleaning. the problem is the gate or trap to the grounds needs to open/remain open during grinding or all backs up and jams. my unit opens the door (correctly) during the rotation but closes just before grinding (over-rotation?). Cuisinart is not aware of this problem (800-726-0190). please call them; i just have.

Posted on Sep 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does no brewed coffee comes out? bypass preground does work


- coffee-channel is stuck.

check google for calibrating/cleaning your gaggia.

Aug 27, 2014 | Gaggia Titanium Espresso Machine

1 Answer

I have been using the pre-ground coffee funnel instead of the attached grinder and I keep finding unused grounds that have fallen behind the grounds tray. I am having to unplug it and clean it out at least...


Are you telling the machine that you are using the funnel and not the grinder ?
You MUST press the top left hand button on the hidden keypad so the machine does NOT grind.
Also 2 level spoons (of the jura spoon) is max you can put in the funnel.


-----


Please dont forget to vote this answer was helpful.


Many thanks

------

Feb 22, 2011 | Jura Capresso Capresso IMPRESSA C9 One...

1 Answer

Whatever the setting is at the grind is always fine. What can I do to re-calibrate the grinder?


Grind Adjustment Tools required: Large blade and medium Phillips head screwdrivers In order to adjust the grind, follow these steps (Refer to figure A): 1. Remove all coffee from the hopper. 2. Set selector knob to the finest setting (Espresso or Turkish) depending on the model. 3. Loosen both knob retainer screws in selector knob one turn only. 4. While pressing the bag switch, located behind the spout, press the START button so that the grinder will run during adjustment. 810 model - Press the ON or START button so that the grinder will run during adjustment. 5. With the grinder still running, turn the adjusting screw in the center of the selector knob slowly to the right until a slight clicking noise is heard. Immediately turn the adjusting screw to the left one grind setting. This is the finest grind obtainable. 6. Tighten both of the knob retainer screws. Once the ESPRESSO grind has been set (Turkish for Model 835, 875, 890), the other grind settings will automatically set correctly. 7. Press the STOP or OFF button. IMPORTANT: Always be sure the grinding burrs are not touching while the machine is running on the ESPRESSO/TURKISH setting. Otherwise serious damage to the motor may result. dr_buckhead.png

Nov 19, 2010 | Grindmaster 810 T Electric Burr Grinder

1 Answer

Coffee grinder will not turn on


I recently had this same issue - it turned out that the lock switch no longer engaged because the spring came out of alignment after the unit was dropped. Chances are you have a similar issue. You can test this by using a small screwdriver to press down on the safely latch and then pressing the ON/OFF (careful of the blades!!). then you can easily fix it.

Dec 26, 2009 | Hamilton Beach 80355 Custom Grind Coffee...

2 Answers

My A-9 Coffee grinder no longer grinds coffee. Have cleaned it and checked it out and nothing. The motor runs but no grounds. Thanks for your help!


This fixes almost all the "beans will not feed or beans will not grind" problems caused by coffee bean dust packed in the burrs. Oily beans cause this problem more fequently.
a. Pour all the beans out the top.
b. Open the settings up all the way and see what else can be poured out. Use your shop vacuum to **** grounds out the spout and backward out the bean bin.
c. Pour in some instant rice and start grinding. Reduce the grind to a small setting like six and then open the settings all the way again. (The grinder will not start at a low setting with the rice in it. If you let it stop, open the settings to about 16 before trying to restart.)
d. Pour out the rice and vacuum out the ground rice.
e. Adjust the grinder to your favorite setting and try a coffee grind. Grind until most of the rice dust is expelled (any remaining trace of rice dust will not affect the flavor of the coffee).

Jul 21, 2009 | KitchenAid A-9 Electric Burr Grinder

1 Answer

Gaggia Titanium integrated grinder not spinning, not grinding.


your grinding chamber is blocked, the same happened to me, did it struggle to grind before? try taking the black shoot out the top with the 2 screws( were you would put pre ground coffee in) take the brew unit out(along with the waste water and bean tray), and reach up to where there is a little spring, the spring controls a little door, if you open the door manually and clean out the shoot to the grinder( make sure the machine is unplugged for this), i used the end of a tea spoon and a little hoover. it should work after this 

Mar 18, 2009 | Gaggia Titanium Espresso Machine

2 Answers

Bypass doser malfunctions


Happens when the preground coffee is not ground fine enough, you may have to put the pre ground coffee in a manual coffee grinder to make it finer. The machine is not really designed to brew regular coffee grounds.

Jan 20, 2008 | Saeco Magic De Luxe Espresso Machine

1 Answer

Coffee Grinder not working


the grinder is most likely stripped and needs to be replaced:-{

Jul 23, 2006 | Saeco Caffe Charisma Espresso Machine

Not finding what you are looking for?
Cuisinart Grind and Brew 10 Cup Coffee Maker Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Coffee Makers & Espresso Machines Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Pierre Laplante

Level 3 Expert

2042 Answers

Charles Tidwell

Level 3 Expert

475 Answers

Are you a Cuisinart Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...