Question about Kenmore Elite HE4 Electric Dryer
Console is set on Bulky/Bedding cycle for 64 minutes. When I press Pause/Cancel all the console lights go out then come back on to the same cycle setting when I release the cancel button. If I open the door the check lint filter light goes out, but comes back on if I try cancel again. Whwn I push start the dryer starts and heats and dries clothes, counts down to 0 then when that is done, instead of going off, it resets to the 64 minute bulky/bedding cycle. None of the other cycle select buttons except "Timed Dry" do anything at all. When I push timed dry it shows 40 minutes and then goes back to the 64 minute bulky setting when I release it. If I push start while still holding the timed dry button it seems to start a normal timed dry cycle. It heats and dries fine. When that cycle is done it sets up again for the 64 minute bulky cycle.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Intermitten Heat up
I would like to thank the ones who responded to giving me a 'hand' in repairing my dryer. I did like you said & changed out the coils & now the dryer is working like it should.
Posted on Apr 12, 2008
It appears your timer/main controller/CCU has failed in this instance.
For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...
FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.
PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.
If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.
Anything too complicated or beyond your scope should be handled by a professional.
If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.
Posted on Sep 29, 2010
Tips for a great answer:
Jul 08, 2015 | Samsung DV331AEW Dryer
Apr 09, 2013 | Dryers
Jan 02, 2013 | Frigidaire Affinity 5.8 Cu. Ft. Electric...
Hello Mary Fortner - It means that the washer has been paused; the cycle has been interrupted. Either the "Pause/Cancel" button or "Start/Pause" button has been pressed. To resume wash - press "Pause/Cancel" or "Start/Pause" once. If this does not prove to be successful please turn the breaker to the unit off for 5 minutes. Then turn the breaker back on to the unit, and retry the cycle setting again.
Dec 11, 2012 | Frigidaire Affinity ATF7000E Front Load...
Nov 23, 2012 | Frigidaire ATF6000ES Front Load Washer
Hi Lance - It means that the washer has been paused; the cycle has been interrupted. Either the "Pause/Cancel" button or "Start/Pause" button has been pressed. To resume wash - press "Pause/Cancel" or "Start/Pause" once. If this does not prove to be successful please turn the breaker to the unit off for 5 minutes. Then turn the breaker back on to the unit, and retry the cycle setting again.
Sep 16, 2012 | Frigidaire Affinity ATF7000E Front Load...
Sep 11, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Sep 24, 2009 | Maytag EPIC MFW9700S Front Load Washer
Apr 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer
Apr 23, 2008 | Beko DSV64W White Vented Tumble Dryer 6...
170 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: