Question about Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

What causes this machine to squeal while running?

It squeals the minute it starts running

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 5,631 Answers

I had a similar issue, had a bad bearing. A quite frequent failure int this device. Only way to diagnose is dismounting it
These are not properly your model but see some videos how to do it:; might help to understand the job

How to Replace Washing Machine Bearings

Repair HE3 Washing Machine Bearing Noise

ApplianceRepairVBlog 2 Replacing the rear bearing on Whirlpool Duet...

Duet Whirlpool Sport Changing Bearings

Posted on Aug 02, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does this top load washing machine squeal when running?


This could be a case of bad bearings and if it is you will need a service company to fix.

Aug 02, 2015 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Squealing dryer


Sounds like the drum bearings are going bad, or at the very least need lubrication. thats what your problem is.

Jan 25, 2008 | Estate TGDS740JQ Gas Dryer

1 Answer

What is causing my squealing belt?


I would check belt tension and then Idler pulley bearing..If still nothing check the A/C compressor clutch..

Jul 19, 2014 | 1991 Nissan 300ZX

1 Answer

Squealing sound when it starts cycle. it quits about 1-3 minutes after.


depending on the exact model, this could be your pump on reticulate mode (I W model). when they start squealing like this, it can often lead to overheating, which will make the whole machine stop cycling.

Sep 28, 2013 | Fisher and Paykel Washing Machines

2 Answers

2001 Blazer Replaced heater core now water pump is squealing and seems like low circulation


my 98 Blazer I had to replace radiator water pump heatercore and hoses. Had head gasket go. Once that happens air and dexcool corrode cooling system. Do you smell antifreeze? Are you loosing antifreeze? Check oil see if its another color not clear or black but i think light brown. Have you flushed out system?

Jan 31, 2013 | 2001 Chevrolet Blazer

1 Answer

When running it has a very high squeal after it has been turned on a few minutes. maybe a belt issue?


es the belt runs on a belt tensioner that has a roller with a breaing inside the roller. The bearing is locked up causing the roller not to move no longer. This is making the belt squeal. If ran much longer the belt will burn off deleting the squeal although the drum will not turn. Replace the belt and the roller assembly. The tensioner will still be fine to use for it is a spring tension device that out last any dryer

Mar 26, 2010 | Dryers

2 Answers

Amana Electric Dryer Model NDE 7800YW squeals when running will quite after 5 to 10 minutes


my amanadryer will run for 10 minutes and then start squealing and quit.wait 15 minutes and it will restart and do the same thing. any help???

Mar 09, 2010 | Dryers

2 Answers

2 Volvo Questions?? First: My air from the vents stopped blowing on all speeds. It happened three days ago, then miraculously started working again while I was driving about 30 minutes or so later. It...


ok part one
the wiring may be loose or the switch is worn out & works intermtantly or there is a bad earth connection
ok part 2
the squeal my be built up brak dust! this caused by fitting pads that are TOO HARD!
you can get a different pad that will not squeal but also there could be a rattle plate thats causing it its the steel plate against the **** pad !
Cheers Rob

Aug 15, 2009 | 1992 Volvo 940

3 Answers

Taylor Icecream Machine Model# y754-27


Try slowing down the rate at which you are drawing the product from the machine,and giving it a minute or two between draws. If you take to much out to fast it starves the barrel and will cause it to freeze up,and that will make the belts squeal.

Dec 11, 2008 | Taylor 632-27 Ice Cream Maker

1 Answer

Squealing noise


possible causes are:

bra wire stuck in tub and rubs against the drum and squeals when on spin.

lip seal at front of bearings squealing - this is a difficult repair

Sep 02, 2008 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...