Ad

Convert both to inches

63 x 90 = 5670

convert back to feet

5670 / 144 = 39.375 sq ft

or

5"3" = 5.25 and 7' 6" = 7.5

5.25 x 7.5 = 39.375

you have two rugs 39.375 x 2 = 78.75 or 78' 8"

Posted on Aug 10, 2015

Ad

each unit in sq ft is 1 X 8 = 8 sq ft X 16 =128 cubic ft and you have an area of 1088 square ft

not the same to get a quantity so think about the first dimension as you only need 2 to get sq ft

female or not , this is simple grade 3 maths in area measurements

not the same to get a quantity so think about the first dimension as you only need 2 to get sq ft

female or not , this is simple grade 3 maths in area measurements

Jan 24, 2018 | Heating & Cooling

break it down to inches then multiply the inches then divide that answer to get back to square feet

11 feet is 132 " + 6" =138"

13 ft is 156"+2" =158"

138 X158 =21804 sq"

1sq" =.006944 sq ft or

1sq ft=144 sq"

21804 divided by 144 = 151.4166 sq ft

11 feet is 132 " + 6" =138"

13 ft is 156"+2" =158"

138 X158 =21804 sq"

1sq" =.006944 sq ft or

1sq ft=144 sq"

21804 divided by 144 = 151.4166 sq ft

Jan 25, 2017 | Office Equipment & Supplies

Stone is approximated at about 2700 lbs. per cu. yd.

An acre is 43560 sq. ft.

8.5 acres is 370260 sq. ft.

There 9 sq.ft. per sq. yd., thus there are 41140 sq. yds. in 8.5 acres.

A cubic yard is 3 feet by 3 feet by 3 feet (LxWxH).

Since you are only going to be at 1.5 feet, each square yard is equal to 1/2 cubic yard, so to figure the cubic yards divide sq.yds. by 2, thus you get 20570 cu. yds. of stone.

20570 x 2700 = 55539000 pounds. Divide by 2000 to get tons:

55539000/2000 = 27769.5 tons.

An acre is 43560 sq. ft.

8.5 acres is 370260 sq. ft.

There 9 sq.ft. per sq. yd., thus there are 41140 sq. yds. in 8.5 acres.

A cubic yard is 3 feet by 3 feet by 3 feet (LxWxH).

Since you are only going to be at 1.5 feet, each square yard is equal to 1/2 cubic yard, so to figure the cubic yards divide sq.yds. by 2, thus you get 20570 cu. yds. of stone.

20570 x 2700 = 55539000 pounds. Divide by 2000 to get tons:

55539000/2000 = 27769.5 tons.

Nov 16, 2016 | Office Equipment & Supplies

Their products are here, but they don't tell you the usage. It has to be on the label by law. The rear label usually lifts up to reveal a small book of three or four pages. If it isn't there, contact the company via the website.

http://www.spectracide.com/Products-and-Solutions/Lawn-Weed-Killers.aspx

The does have label details here

http://www.spectracide.com/Customer-Help/Labels-and-MSDS.aspx

For the Spectracide it is 1/2 oz to a gallon, but it depends on what type of grass you have. I will copy and paste the label details, but I doubt the format will stick, but it is all there.

http://www.spectracide.com/Products-and-Solutions/Lawn-Weed-Killers.aspx

The does have label details here

http://www.spectracide.com/Customer-Help/Labels-and-MSDS.aspx

For the Spectracide it is 1/2 oz to a gallon, but it depends on what type of grass you have. I will copy and paste the label details, but I doubt the format will stick, but it is all there.

Ounces of Concentrate to Use for:

St. Augustine*,

Bahia,

Centipede

2/3

2 2/3

13 1/3

21 1/3

1

4

20

32

1

4

20

32

1/2

2

10

16

250

1,000

5,000

8,000

Sq ft

to be

Treated

Bluegrass,

Fescue, Rye,

Zoysia

Gallons

of

Water

*DO NOT USE ON FLORATAM VARIETY OF ST. AUGUSTINEGRASS IN

FLORIDA.

HOW MUCH TO USE

SPOT TREATMENT

To spray small areas or individual weeds, use a pressure sprayer for better

control. Do not use a hose-end sprayer. Mix as directed in table below. Shake

well before spraying. Be certain to wet each weed.

ENTIRE LAWN

PRESSURE SPRAYERS

Measure amount of concentrate from chart below into sprayer tank and dilute

with 1 gal of water. Close tank sprayer and shake well before spraying. Use a

spray pattern that gives small spray droplets without any ne mist to treat

250 sq ft.

HOSE-END SPRAYERS

"CONCENTRATE ONLY" (DIAL) SPRAYERS

1. From the chart below, determine amount of concentrate to be applied for

each 250 sq ft of lawn.

Bermuda,

Bentgrass

St. Augustine*,

Bahia, Centipede

1/2 - oz

2 - oz

2/3 - oz

2 2/3 - oz

1 - oz

4 - oz

1/2 - oz

2/3 - oz

1 - oz

Grass

Type

Ounces in

Sprayer

250 sq ft

1,000 sq ft

250 sq ft

1,000 sq ft

250 sq ft

1,000 sq ft

Area

Treated

Dial

Setting

Bluegrass, Fescue,

Rye, Zoysia

*DO NOT USE ON FLORATAM VARIETY OF ST. AUGUSTINEGRASS IN

FLORIDA.

2. Fill sprayer jar with enough concentrate to cover area to be treated. Do not

add water to sprayer.

3. Set dial on sprayer to the setting from the chart below.

4. Attach sprayer to hose. Extend hose to the farthest area of lawn to be treated

and work back toward faucet so that you do not walk over treated areas.

Apply evenly to lawn.

EXAMPLE: To treat 1,000 sq ft of fescue lawn, add 4 - oz of concentrate to the

sprayer with sprayer dial set on 1 - oz. Check the directions you received when

you purchased your sprayer for further details on the proper use of your dial

sprayer.

"CONCENTRATE-PLUS-WATER" SPRAYERS

For sprayers that require the addition of water as well as concentrate prior to

application:

1. From the following chart, determine amount of concentrate required to treat

each 250 sq ft of lawn.

2. Pour concentrate into sprayer jar to the required "- oz" level.

3. Then add the appropriate amount of water to the "gallons" level. Replace

sprayer top on jar and shake well before spraying.

4. Attach sprayer to hose. Extend hose to the farthest area of lawn to be

treated and work back toward faucet so that you do not walk over treated

areas. Apply evenly to lawn.

EXAMPLE: To treat 1,000 sq ft of fescue, pour in concentrate to the 4 - oz mark

and add water to the 4 gal mark. Check the directions you received when you

purchased your sprayer for further details on the proper use of your

Lawn Weed Killers

Apr 18, 2016 | Spectracide Bug and Weed Killer for Lawns...

You get square feet by multiplying linear feet with another linear feet. 18 sq.ft = 3 lin ft x 6 lin ft or 2 lin ft x 9 lin feet or 4,5 lin ft x 4lin feet.

Sq ft is used to quantify surface area where linear feet quantify distance but lin ft x lin ft gives you square ft (surface area)

Sq ft is used to quantify surface area where linear feet quantify distance but lin ft x lin ft gives you square ft (surface area)

Mar 07, 2016 | Office Equipment & Supplies

78 sq ft room see my other explanation.

Aug 10, 2015 | Home

Read size of air conditioner you need , each ton of air conditioning will keep cool 400 square.so higher ton yo pick you feel cool.please read below square feet to ton chart.

1 ton on 400 sq. ft.

2 ton on 800 sq. ft.

3 ton on 2000 sq. ft.

5 ton on 2570 sq. ft.

1 ton on 400 sq. ft.

2 ton on 800 sq. ft.

3 ton on 2000 sq. ft.

5 ton on 2570 sq. ft.

May 28, 2014 | Computers & Internet

Hello, to solve your question about what number to use to calibrate your broadcast spreader, please use the step-by-step instructions below:

1. If you don't already know the square footage of your lawn, please walk off or measure, multiplying the length by width. For example, my lawn is 100 ft wide by 100 ft long; this equals 10,000 sq. ft.

2. Use this figure (30,000 sq ft) to determine how much fertilizer, insecticide, fungicide,apply etc., to purchase and apply.

3. To calibrate the spreader for applying your product at the correct rate, first weigh and hold out an amount of product to cover a pre-determined test area; for example, enough for a 200 sq ft space.

4. Because most lawn fertilizers are packaged to cover areas in 1000 sq ft increments, it's easy to figure how many 1,000 sq ft applications you need for your lawn.

5. Set your spreader to 3 and measure 1/5 of the recommended application on your product, to cover a 200 sq ft area.

6. Use your spreader to cover this 200 sq ft area.

7. If there is product remaining in the hopper after walking this 200 sq ft area, increase the setting number and move to another test area, repeat steps 5 and 6.

8. If there wasn't enough product to cover the test area, back the number down, move to another test area, and repeat steps 5 and 6, until you finish with product and lawn test area at the same time.

9. Remember to never leave product in your hopper because many chemicals are corrosive and can destroy the moving parts, making the spreader inoperable.

I hope this helps!

1. If you don't already know the square footage of your lawn, please walk off or measure, multiplying the length by width. For example, my lawn is 100 ft wide by 100 ft long; this equals 10,000 sq. ft.

2. Use this figure (30,000 sq ft) to determine how much fertilizer, insecticide, fungicide,apply etc., to purchase and apply.

3. To calibrate the spreader for applying your product at the correct rate, first weigh and hold out an amount of product to cover a pre-determined test area; for example, enough for a 200 sq ft space.

4. Because most lawn fertilizers are packaged to cover areas in 1000 sq ft increments, it's easy to figure how many 1,000 sq ft applications you need for your lawn.

5. Set your spreader to 3 and measure 1/5 of the recommended application on your product, to cover a 200 sq ft area.

6. Use your spreader to cover this 200 sq ft area.

7. If there is product remaining in the hopper after walking this 200 sq ft area, increase the setting number and move to another test area, repeat steps 5 and 6.

8. If there wasn't enough product to cover the test area, back the number down, move to another test area, and repeat steps 5 and 6, until you finish with product and lawn test area at the same time.

9. Remember to never leave product in your hopper because many chemicals are corrosive and can destroy the moving parts, making the spreader inoperable.

I hope this helps!

Apr 02, 2011 | Garden

Your unit is sufficient to cool up to 1000 sq ft satisfactorily. You have a 2 ton unit. 500 feet per ton is standard.

Jul 09, 2009 | Coleman Heating & Cooling

614 people viewed this question

Usually answered in minutes!

×