Question about Hobart H600 Stand Mixer

Open Question

I can stop the dough hook with hands in 1st gear but motor still turns. all gears good and no broken keys

Not belt driven

Posted by on

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1665 Answers

SOURCE: A200 problem

Check the planetary.this is the bottom part of the mixer where you attach the hook.
You will see two nuts; make sure their tight as the planetary may have moved down.
Also have a look below:
http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem

Posted on Feb 04, 2008

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: Dough Hook Stops moveing under heavy load

Does the mixer work in any other speeds?Are you mixing pizza dough and in what speed?I service these mixers alot--i work for hobart.It sounds to me like you have a sheared key on one of the shafts.The mixer doesnt have a clutch.

Posted on Feb 22, 2008

bigg t

anthony james

  • 640 Answers

SOURCE: The gear is slipping on my Hobart A200

In what speed is it slipping?You only use 1st speed for dough,right?Can you put it in gear and stop the hook from moving with your hand?Let me know.

Posted on Jan 14, 2009

Anonymous

  • 1 Answer

SOURCE: A200-T Hobart Mixer 1st speed have no torque

Check the spring pin that locks the motor shaft to the main drive gear in the gear box. You should be able to turn the motor from the back at the cooling fins and watch the shaft spin in the gear, that is if the pin is sheared. That is a common problem. if you plan on keeping this machine for a while, i recomend that you spend a little more on a quality spring pin,

mechanictony-
good luck.

Posted on Jan 20, 2009

traboH

traboH Mr

  • 27 Answers

SOURCE: Hobart A-200 3943. Having a problem with torque.

Check your recipe against the capacity chart found here: http://www.primasupply.com/images/hobarta200.pdf

You may be overloading the unit. Hope this helps.

Posted on Oct 19, 2009

Testimonial: "Thank you for the chart! I will check up on the recipe. "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 60 qt. Hobart Mixer and it works but I can literally grab the dough hook and stop it with my hands, when in first gear. Does anyone know what the problem could be?


If I remember from the last time I saw inside one they are belt driven. It sounds like yours is slack. There are screws on the top to remove the cover plate. I also vaguely remember a Bakelite laminate cog that has a shear pin. It has been a long time though that I saw the inside but have used them often. I am a chef, qualified in 1971 :-)

Oct 06, 2015 | Hobart Food Mixers

1 Answer

Hook straggles to turn when dough in bowel


The Legacy is an electronic mixer and the transmission does not have any gear, and it frequency convertor that works in phases 2 and 3. If the hook struggling when turns, check the transmission belt locasted at the top of the mixer, remove the cover first.
If the belt is loose, tense it with the screw on the base of the motor or replace the belt. If you can not fix it, let me know and I'll try something else.

Mar 23, 2014 | Hobart HL600 Legacy Stand Mixer

1 Answer

Drive Shaft stopped kneading dough


To give the mixer strength it has planetary gears. Something may be wrong in the gear section

Nov 26, 2013 | Bosch 800-watt Universal Plus Mixer with...

1 Answer

In middle of kneading dough, the machine stopped! I noticed that the gears that connect the bowl to the machine, stopped turning, when machine goes on, it makes a noise, but nothing turns.


Hi HENNY346. Your Bosch mixer is belt driven and from the description of your mixer’s symptoms I suspect that the drive belt has come loose or failed completely so it stopped driving the dough hook. You say that when you turn the mixer on, it makes a noise, which may be the motor running without any load, but your description of ‘noise’ is very vague.
The good news is that you should be able to diagnose and fix this quite easily (OK, maybe with a little effort) by yourself, if you are a DITY type person, feel adventurous, and your mixer is not under warranty.
Here are links to two online parts vendors for your Bosch mixer that also provide an exploded view diagram along with part names, numbers and prices. They are: Cook's Quarters and AppliancePartsPros.com It can be very gratifying to go “under the hood”, figure out what’s wrong and fix it yourself. Good luck , I hope this helps. Howard, Burke, VA
If this solution was helpful, please rate it, thanks! – hslincoln

Feb 23, 2010 | Bosch MUM6612 Universal Series Mixer

3 Answers

KitchenAid 600, Stand Mixer - Loud grinding noise, happened when mixing bread dough. When bowl is lowered (dough hook disengaged)....no noise, hook turns. When bowl is raised so that hook engages dough,...


Hi. Stop using your mixer. If your mixer is still covered by warranty, call Kitchenaid Customer Service, they are very good with warranty repairs.

If your mixer is out of warranty, remove the silver band that surrounds the top of mixer. Remove the top cover. At the front of the mixer, locate the transmission housing which is now exposed. Examine this housing carefully for cracks. If you find cracks anywhere in this housing, you have found the under-engineered plastic transmission housing. Kitchenaid's replacement housing is made of metal. Your plastic housing has no business being in a mixer that is marketed as being able to mix bread dough. It cannot!

If you're confident that you can make the repairs yourself, go to the Kitchenaid website and download the parts drawings. Remove the Trans. housing, remove the worm gear shaft assembly which is driven by the motor.. Remove and save as much grease as necessary to thoroughly inspect the worm gear. Inspect the worm shaft bearings. Look for cracks, or missing pieces on the bearings. Look for crunched cogs on all gears. Be prepared to wait at least a month for your parts to arrive after you order them. The replacement grease should be Shell Darina 2, or Chevron FM ALC EP 2.

If you're not confident about repairing this yourself, call Kitchenaid and determine the nearest "approved" repair shop.

You may be able to pressure Kitchenaid to pay for the damaged parts in your mixer. They are still installing these plastic Trans. housing on new mixers. Insist on a metal cover when replacing. Apparently, Kitchenaid feels no shame in their manufacturing process, and will not issue a recall notice for these housings. They are substandard at best.

If you found this solution helpful, please rate it. Good luck! ricardok45.

Jan 31, 2009 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Beater mechanizim runs very slow and will not change speed


It sounds like you sheared a key in the transmission.Does any gears work?were you using 1st gear for dough?

Jan 15, 2009 | Hobart D300 Stand Mixer

1 Answer

The gear is slipping on my Hobart A200


In what speed is it slipping?You only use 1st speed for dough,right?Can you put it in gear and stop the hook from moving with your hand?Let me know.

Jan 13, 2009 | Hobart N50 Stand Mixer

2 Answers

Hobart A200


When you say lag and catch up. This may not be a issue. I have seen this with dough and a spiral hooks on all sizes of Hobarts the hook and dough get in a position to push the hook forward and the drive gears catch back up the hook. in fist gear on the 20 quart this is common for sure. but its normal. if you have a real slip from a sheared key it will not take long to where you can hold the planetary shaft with your hand and stop it. another slip that might be possible is if your mixer has the first generation worm shaft gear Assembly. when it is worn out it will slip you. this is the shaft that drives directly off the motor. you can tell if it's first Gen by it has a large spring on it. the tow later versions are all keyed to the shaft no chance to slip unless a key shears.
Michael

Oct 24, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart A200


amy, depending on how old your mixer is there are 2 types of clutches for 1st gear.these could be your problems--a key is sheared on the shaft--shaft/gear is broken.the bottom part of the mixer where you put on the attachements is called the planetary,does it look like it has moved down?you could tell if the dough hook,wire whip,ect,ect is hitting the bottom of the bowl.if this is the case its just simply tightening the 2 nuts next to the beater shaft.if this is not the case you would have to dissasemble the transmission.let me know.

Jan 11, 2008 | Hobart A200 Stand Mixer

2 Answers

Blakeslee CC-30 Planetary Mixer & dough hook not mixing correctly


it sounds like you may have a sheared key on one of the shafts.with no product in the mixer will it run in any other speeds?when mixing pizza dough you should only use 1st gear.if it does run in other speeds you have a sheared key or broken shaft,if it doesnt run in any speeds drop the planetary and check the key on that shaft.

Jan 05, 2008 | Food Mixers

Not finding what you are looking for?
Hobart H600 Stand Mixer Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...