Question about HHB BurnIt CDR830 CD Recorder

Open Question

MY HHB BURNIT PLUS CDR 830 DISC RECORDER KEEPS TELLING ME THEIR IS NO DISC IN IT WHY EVEN IF I PUT IN A RECORDED DISC SAYS SAME THING

Posted by on

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
SuperTech-11

Norman Skinner

  • 1591 Answers

SOURCE: Live kick drum causes HHB 830 Burnit Plus to stop

Absolutely. You are going to have to isolate the drummer from the writer somehow.
We used to put the drummer in an isolation booth.
You can also try building a "foamy box" for the CD writer. The kind of foam you want looks flat on one side, and sine wave like on the other. Put the flat sides out.
Build it with just the front open, and run the cables under the recorder and out the front if length allows.
CAUTION: I recommend using this enclosure ONLY when there is a live drum being recorded live.
This is because prolonged enclosure like this may cause heat issues.

TIP: which ever side faces the drummer, the writer should not be touching that foam wall.
IE - if the rear faces the drummer, the box should be big enough that the rear wall doesn't touch the writer.
Good luck, and let me know how that all works out for you!
(hey, it's easier than suspending the writer with elastic or bungee cords!)
[subnote - yes, that works too, but it's a pain in the **** building the metal frame!]

Posted on Feb 25, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need remote for my hhb butnit plus


Either contact hhb or look on E bay. Universal remotes usually do not have enough of the functions required to finalize discs and such.

Dec 26, 2012 | HHB BurnIt CDR830 CD Recorder

1 Answer

Hi, I have an HHB Burn-It CDR 830. Whenever I'm recording, along about the 5th track in- the player starts to fuzz out. The time stutters/freezes momentarily, and then continues normally for a while...


If it's always around the same physical location on a given CD it would have to be a physical problem with the transport, not the lens.

Esoteric but comprehensive advice....

http://www.repairfaq.org/sam/cdfaq.htm

Sep 20, 2011 | HHB BurnIt CDR830 CD Recorder

1 Answer

Hi , My cdr 830 stopped recording at maximum fidelity, and most recently all data disappears upon finalization, the prompt reading "new disc" after recording a whole 70 plus cd. Frustrating...


I can't speak to the hardware issues that might be at play here but I would advise you to retain the 'bad' recordings. I've copied unfinalized CD's from an old DVD player. It will read the CD but you won't be able to manuever around the tracks. As I recall, the track marks will still be there.

I don't know what you mean by 'maximum fidelity'. The CDR records at the CD standard of 44.1kHz. Digital is all ones and nones. Just data. If it is written correctly or with tolerable errors the ADC of the player (ANY player) turns it all into music.

Mar 02, 2011 | HHB BurnIt CDR830 CD Recorder

1 Answer

Live kick drum causes HHB 830 Burnit Plus to stop recording, vibrations?


Absolutely. You are going to have to isolate the drummer from the writer somehow.
We used to put the drummer in an isolation booth.
You can also try building a "foamy box" for the CD writer. The kind of foam you want looks flat on one side, and sine wave like on the other. Put the flat sides out.
Build it with just the front open, and run the cables under the recorder and out the front if length allows.
CAUTION: I recommend using this enclosure ONLY when there is a live drum being recorded live.
This is because prolonged enclosure like this may cause heat issues.

TIP: which ever side faces the drummer, the writer should not be touching that foam wall.
IE - if the rear faces the drummer, the box should be big enough that the rear wall doesn't touch the writer.
Good luck, and let me know how that all works out for you!
(hey, it's easier than suspending the writer with elastic or bungee cords!)
[subnote - yes, that works too, but it's a pain in the **** building the metal frame!]

Feb 25, 2011 | HHB 830 Plus CD Recorder CD Player

1 Answer

Hi there, when recording analogue from mixer to HHB Burner 830 the blank cd does not read properly, and records blank even thou the connections are in the right ins and out (phono to phono) And the input...


I can only assume that it's not changing the analogue signal into a format suitable for transferring to a CD. Check the recording settings. Make certain the signal is being converted to say a WAV format or MP3 etc.

May 01, 2017 | HHB BurnIt CDR830 CD Recorder

1 Answer

AFTER recording is made Tried to finalize and it says repair... what is causing this .


The CDR lost track of the information on the disc. This most often happens when the unit is powered off before the disc was ejected. Give the unit about 40 minutes to go through the disc contents and locate the tracks. When the Repair message goes away, then you can finalize the disc.

I hope this helps

Cindy Wells

Sep 24, 2010 | HHB BurnIt CDR830 CD Recorder

1 Answer

What does pma rec mean on the hhb cbr 830 ? it just stops recording


The recorder is writing TOC data to the disc's PMA (Program Memory Area). Never turn off the power while this display is
showing.

http://www.retrevo.com/support/HHB-CDR830-CD-Players-manual/id/3875ci874/t/2/

Aug 13, 2010 | HHB BurnIt CDR830 CD Recorder

1 Answer

Can't finalize after recording, disc error


So are they always CD-RW?

I have a Pioneer PD509 which is a spittin' image of the HHB CDR830 but tied down to use CD-Audio discs only.

My experiece with Rewriteable Media has been that they don't hold up to multiple uses. I used them to make quick 'n' dirty dubs of cassette audio then worked it into a polished copy with proper track marks and sweetening later for copy over to a CD-RA. After a few passes I'd start getting audible problems when copying off the -RW's, so I routinely just use them about 5 times. With two DVD players and a Blu-Ray I sometimes get through the errors on one of them for one final digital copy and then I can them.

BTW: you may want to try the failing disc in a DVD player. Mine will play through an unfinalized CD but can't cue up to anything. So if the recording is vital you might retrieve it that way. Just remember to pause the Recorder at the end of the last cut you want because the DVD will just crash right into the old data without changing track numbers or any warning.

Mar 04, 2010 | HHB BurnIt CDR830 CD Recorder

1 Answer

Anytime I try to record with my HHD BurnIT cdr 830, the red record light will only be bleeping and the time counter will not work as well. And there will be nothing recorded on the cd.


Just a guess, but did you ever try to hit the record a second time once you're all set up to start? The first press of the record button places the machine in record/pause mode after it calibrates itself to the disc.

Jan 19, 2010 | HHB BurnIt CDR830 CD Recorder

2 Answers

Cannot use the finalize function anymore


they wear out have it serviced and cleaned

Nov 05, 2009 | HHB BurnIt CDR830 CD Recorder

Not finding what you are looking for?
HHB BurnIt CDR830 CD Recorder Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top HHB Audio Players & Recorders Experts

Cindy Wells

Level 3 Expert

6063 Answers

Ekse

Level 3 Expert

13434 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you a HHB Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...