Question about Amana 30" Self Cleaning Electric Range Stove W/ Oven Freestanding Black & Gray

1 Answer

What does 5AB mean on clock?

Fixing time on clock when 5AB came up instead of time

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Amana Master
  • 4,134 Answers

Your display is actually reading "SAB". This is an indication of a mode of operation rather than an error code. The following link explains:

http://www.fixya.com/support/r3608491-sabb_or_sab_explanation_kitchen_ranges

Sabbath Mode is a feature that allows the consumer to disable certain features of the range in order to honor the sabbath. Usually this disables the oven, but allows the consumer to still use the surface burners. You cannot defeat it by unplugging the range or turning off the breaker either. You will either have to wait 72 hours for the mode to clear, or figure out how to turn it off.

Somewhere in the owner/operator's manual is a section that refers to "Sabbath Mode". Since all ranges differ in features and operator, you need to refer to the operation section of your owner's manual to find out how to shut the feature off.

If the model number you listed this question under is correct, you need to press and hold the CLOCK button for 3 seconds to clear the Sabbath Mode. "Sab" will flash for about 5 seconds, then return to normal display.

Posted on Oct 22, 2015

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E9 code error pops out and flashes.. what does it mean and how to fix this? Since it came on,cooktop not working at all.. Hope to get some help


I had a look and all I found was for a Prestige cooktop?? E9 apparently means a failure of one of the temperature sensors but not sure which one... Sorry.

Jan 05, 2015 | Cooktops

1 Answer

Burners work on top of stove, but oven and clock not working


Make sure the clock is not set to "auto" function or on "timer" mode. The oven will not start until the correct time has come up. If the clock is not working , this is likely to be the problem. See if there is a manual operation control or switch. You may have to get a new clock or arrange for the clock to be bypassed so the oven can work without it. Most electronic clocks can stop an oven from working if they fail.

Jun 19, 2014 | Kenmore 30 in. 42701 / 42702 / 42709...

1 Answer

Westinghouse 808 cooktop clicking noises


Sometimes after a power failure the p c board needs re setting. Turn off the power for a few minutes that allows it time to re set. Turn it back on then individually turn on each element for a couple of minutes.

Apr 22, 2014 | Whirlpool Cooktops

1 Answer

F14 Error


First please get the full model number of the range. Kenmore products are made by other manufacturers and the error codes will depend on the manufacturer.

Most likely, you have a Frigidaire range (for example a 970. model). Then the F14 code could indicate a problem with the P12 ribbon cable connector tail, a bad EOC (control unit), or touchpad. First try disconnecting and reconnecting that cable. Next the EOC should be replaced. Finally the touchpad should be replaced.

If this is a brand new range, contact Sears to get a repair person to fix the range. If you bought it used, see the above possible solutions.

I hope this helps.

Cindy Wells

Dec 24, 2013 | Kenmore 30" Electric Double Oven...

1 Answer

5Ab 6ATH error


you can try to unplug the oven and tell it sit for a minute then plug it back in or e-mail the manufactor and ask them what they do it's there product.

Nov 07, 2012 | Maytag Stove / Oven / Range Cooktop -...

1 Answer

There were lightnings this night and it did shock the electricity and now I have blinking F 5 lights on to cooktop


should be able to clear out and reset clock. If I remember right it means Power Failure, which just means you lost electricity

Oct 15, 2011 | Whirlpool Cooktops

1 Answer

Ge monogram cooktop model#zeu30rsf1ss error code f1 74


Hi There
I have found the codes that you need and hope this helps you.
F1 Stuck touch pad Usually means that either the touch pad or the oven control (also called clock or ERC) is defective and needs to be replaced. If this fault code cannot be cancelled, replace the oven control (also called clock or ERC), touch pad, or both.Thank You for writing to fix ya.
Best Regards Richard

Feb 18, 2010 | GE Monogram ZEU30R Electric Cooktop

1 Answer

Magic chef range


f1 is the code for a failed clock most of the times you must replace the clock most of them have a five year warrenty check your owners manuel for warrenty info

Mar 12, 2008 | Cooktops

Not finding what you are looking for?
Amana 30" Self Cleaning Electric Range Stove W/ Oven Freestanding Black & Gray Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Cooktops Experts

Cindy Wells

Level 3 Expert

6065 Answers

Paul Carew

Level 3 Expert

3484 Answers

Ismael Rodriguez...

Level 2 Expert

184 Answers

Are you an Amana Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...