Question about Bowflex Treadclimber

Open Question

What does L5 error indicate? - Bowflex Treadclimber

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is l5 error


Probable Cause A LS error on the Landice L-Series treadmills can also look like L5 and this error code means there is a loss of speed signal. If this error occurs with no belt movement, the causes for the LS or L5 error are:

A) Faulty upper display board or faulty relay board
B) Improper speed control wiring
C) Improper motor control wiring
D) Worn or faulty motor brushes
E) Faulty pwm/relay combo board or faulty drive motor


This error can also occur with belt movement but speed will not increase. Causes for the LS or L5 error with belt movement are:

A) Speed sensor is out of adjustment
B) Speed sensor is damaged or faulty
C) Display cable is damaged or faulty
D) Improper speed control wiring

If you find yourself needing any further assistance please do not hesitate to call our technical support team at 888-713-2880 or check out our technical support center at http://www.sportsmith.net/supportsearch.aspx we would be more than happy to help!

Aug 03, 2015 | Exercise & Fitness

1 Answer

Speed sensor L5


follow this steps and fix it. God bless you
SAFETY SHUTDOWN Loss of Speed Signal" or "L5" WITH belt movement
This is usually an indication of a speed control malfunction. The upper board is not recognizing a signal pickup from the speed sensor. This could be due to the speed sensor being misaligned, improper connection, or bad speed sensor. Refer to the flowchart on page
"SAFETY SHUTDOWN Loss of Speed Signal" or "L5" WITH NO belt movement
The speed sensor is not recognizing any motor movement. This displays the error message to the upper board.
NOTE: USE THIS FOR DIAGNOSING THE PWM/RELAY COMBO BOARD

Oct 21, 2013 | Landice Exercise & Fitness

1 Answer

I have York intensity treadmill and its not working, the L 5 keeps showing on screen.


follow this steps and fix it. God bless you
AFETY SHUTDOWN Loss of Speed Signal" or "L5" WITH belt movement
This is usually an indication of a speed control malfunction. The upper board is not recognizing a signal pickup from the speed sensor. This could be due to the speed sensor being misaligned, improper connection, or bad speed sensor. Refer to the flowchart on page
"SAFETY SHUTDOWN Loss of Speed Signal" or "L5" WITH NO belt movement
The speed sensor is not recognizing any motor movement. This displays the error message to the upper board.

Test the input voltage 2)test the relais 3)see sensor speed wiring 4) test terminal motor.

God bless you

Oct 09, 2013 | York Exercise & Fitness

1 Answer

My bowflex is showing "err l5" what is wrong with it?


This error indicate that the console is unable to deter mine the speed of the belts. Potential parts associated with this are the Speed Sensor, MCB, Motor, I/O cables, and Upper Electronics. Call Nautilus Service Dept 1-800-628-8458

Apr 14, 2010 | Bowflex Treadclimber

1 Answer

When I turn On the digital camera It indicates "System Error". There is some solution? Thanks a lot.


Turn camera off, remove
and reinsert batteries,
and turn camera on. If
error persists, contact
retailer or Nikon repre-
sentative.
Technical Support
8AM - 2AM (Eastern) 
7 days a week
1-800-Nikon-UX 
1-800-645-6689
Have your product, serial number, and computer (if applicable) available




http://support.nikontech.com/app/answers/detail/a_id/238



Mar 28, 2010 | Nikon COOLPIX L5 Digital Camera

2 Answers

I have a error reading of l5 or ls not too sure york fitness z16


Hi,

The L5 message means that there is a problem with the speed setting switches. Some models have one set of speed adjusting stitches on the handlebar and another set on the console. One of them is defective and is causing the problem.

Dec 29, 2009 | York Exercise & Fitness

1 Answer

"Lens Error" message in Nikon Coolpix L5


There are a few different things it could be though most likely the lens itself is out of alignment. There are methods you can try to "click" it back into place. First off how long have you owned the camera?
Thanks,
Lee

Sep 14, 2009 | Nikon COOLPIX L5 Digital Camera

2 Answers

L5 flashing on my calypso washer


.
The error code is actually a LS not L5, it stands for a lid switch error, it could be a bad lid switch or you may have forgotten you had a previous load in and went to rewash and went and started the machine without opening the lid which automatically throws an LS error.so check the lid switch .hope helps p-ls appreciate by rating as fixyaa

Feb 05, 2009 | Whirlpool Calypso GVW9959K Top Load Washer

Not finding what you are looking for?
Bowflex Treadclimber Logo

Related Topics:

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bowflex Exercise & Fitness Experts

Ekse

Level 3 Expert

13434 Answers

Bob Hawk

Level 1 Expert

2 Answers

ray gallant

Level 3 Expert

66051 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...