Question about Cuisinart Grind and Brew 10 Cup Coffee Maker

Open Question

Grind and brew starts randomly

Starts the grinder by itself, with no buttons pressed

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: coffee maker won't start and just beeps when plugged in

The door on the top is not closed properly. When you open the top door(cover),you will see a button that is located on the top of the grinder cover. that is a switch that tells the coffee maker that the door is closed and can safely make coffee..please check that all parts are in place and top door(cover) is closed comepletly. good luck.

Posted on Jun 26, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: cuisinart grind and brew

This happens when the machine needs cleaned. Fill coffee maker with white vineger instead of water. Turn grind off, make sure empty pot is in place. Brew a pot of hot vineger. Repeat. Brew a pot of hot water. Repeat. This process removes mineral buildups inside machine. If you have access to filtered water, start using that to brew your coffee. I do and probably do this process 1 per 6 weeks.

Posted on Oct 07, 2008

Anonymous

  • 1 Answer

SOURCE: The grinder does not work

I just sent an email to the following address: customerservice@cuisinart.com

explaining the problem. I'll repost here when I hear back.

Posted on Oct 28, 2008

Anonymous

  • 1 Answer

SOURCE: cuisinart grind and brew beeps, but won't brew

we unplugged it for 10 minutes or so, plugged it in again, beeping stopped and it works again.




Posted on Nov 16, 2008

Anonymous

  • 1 Answer

SOURCE: I Have a Cuisinart Automatic

I have a cuisinart model dgb-600bc coffee grind & brew, didn't have a manual with it when purchased, plugged in it & hit the on button, lights up when pushing in on it, but let it go & it stops, but doesn't brew nothing. HELP -

Posted on Mar 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to program Cuisinart to grind or brew?


The procedure is as follows:--For most Grind and Brew's, you can press the PROG button or turn the dial to PROG, then press the HRS button to change the hour and minute to change the time. The led will display PM if it is set for PM, but will not display AM if it is set for AM. After you have finished programming, press the PROG button. Now activate the AUTO-ON button or slide the dial to the Auto-On position. This will help.Good luck.

on Mar 08, 2010 | Coffee Makers & Espresso Machines

1 Answer

Breville you brew auto start not working


There is an error in the manual. Following the directions will, as you discovered, start brewing immediately.

To complete the auto-start programming, in step 8 of "Programming Auto-Start" you should NOT "press the PROGRAM button."

Instead, as soon as you have set the desired minute of the Start Time (step 7 in the manual), press the START / CANCEL button.


The LCD screen will then dim and display 'PROGRAM ON' to indicate that the Auto-Start feature has been successfully turned on.

Hope this helps.

- Owen.

Sep 13, 2012 | Breville You Brew - Single and Carafe...

3 Answers

Flashing dregdrawer and descaling lights


Descale in the water tank...press nd hold water button and the mechine will do the rest automatically u jst hv to turn on or of the water knop...drawer take it out and take out the brewing unit put them back again thats it.
1_15_2019_10_09_47_am.jpg

Aug 19, 2012 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Hi, The machine is trying to grind beans then states that there are no beans, yet the bean holder is full. We have dismantled the holder and cleaned out the grinder block, it worked once or twice then...


IT could be that the grind is too fine and the grinder is being clogged with coffee, first try adjusting to a coarser grind at least 2 to 3 numbers, if coffee flows into the brew unit you are good to go if not, then grind chamber needs to be vac out and cleaned then adjust grind and start over.

Apr 13, 2011 | Gaggia Titanium Espresso Machine

1 Answer

My Saeco magic deluxe needed the circuits relaoded. I followed the intructions and now my machine tamps first and then grinds the beans leaving me with weak coffee can anyone solve this for me ?


try this.

hit the external dosage button. Its the button on the top middle that controls when you want to put grinds in from the external shoot.

Do not place any coffee in there. then just press the normal brew button. it should brew more or less a cup of water.

then try brewing a coffee like normal and see if the problem fixes.

this happens because there is a little door in the grinder that hits a microswitch that tells the grinder to stop grinding.

This is supposed to happen when the grinder fills the brew group enough to click the microswitch.

Sometimes it does reverse itself like this.

The only other solution would be to open the grinder up and vaccum all grounds out and vaccum the grind shaft above the brew group on the side.

This will cause the door to go back to normal position.

If it doesn't work after that, the door or microswitch has gone faulty. But that is an extremely rare situation.

Hope this helps.

Oct 03, 2009 | Saeco Magic De Luxe Espresso Machine

1 Answer

It wont stop beeping


Is it still beeping? ;) It will beep if you have the automatic brewing programed and the grinder and it's lid are not in place.Once you have put the grinder back in place, push the small white button down that is on the grinder lid. The beeping will stop. Don't press the program button again or it will start beeping again...but if you do, just push that white button again.

Aug 12, 2009 | Cuisinart Grind and Brew 10 Cup Coffee...

1 Answer

Cuisinart grind and brew 10 cup grinder stopped working


My grind and brew is a little different, but when I have this problem, I havve to remove the beans and vaccuum out the bean reseviour. It gets clogged and then it won't grind.

Mar 23, 2009 | Cuisinart Grind and Brew 10 Cup Coffee...

1 Answer

How to program to automatic brew


For most Grind and Brew's, you can press the PROG button or turn the dial to PROG, then press the HRS button to change the hour and minute to change the time. The led will display PM if it is set for PM, but will not display AM if it is set for AM. After you have finished programming, press the PROG button. Now activate the AUTO-ON button or slide the dial to the Auto-On position.
But, like the person said, we would need your exact model # to be more specific.

-Tha Mp3 Doctor

Dec 29, 2008 | Cuisinart DCG-12BC Electric Blades Grinder

2 Answers

Coffee maker beeping


Is your grinder in and the lid down? My coffee maker (grind & brew) started beeping after I cleaned it and turned the left knob clockwise with the grinder still disassembled. There's a little button that is depressed when you close the lid with the grinder in there (I'd guess it's a safety feature). I pressed down that button, and the beeping went away.

Jan 20, 2008 | Cuisinart Grind and Brew 10 Cup Coffee...

Not finding what you are looking for?
Cuisinart Grind and Brew 10 Cup Coffee Maker Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Charles Tidwell

Level 3 Expert

475 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Cuisinart Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...