Question about Heating & Cooling

1 Answer

My boiler keeps getting shut down and the message says "supply too fast". I have to reset the boiler every time that happens. What is wrong?

I suspect that there is something wrong with the control panel, and I am thinking about replacing it with a new one. But I am not sure

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 572 Answers

Either the pump in not running to circulate the heat, or the boiler is going straight into high fire and not modulating correctly.

Posted on Jun 27, 2016


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

After a thunder storm i have sound, no picture, the tv powers up, the back lights are on, should i suspect a bad lcd screen?

Something else is going on. The T-Con board has no other function than controlling the picture. If there is a separate board for the led drivers, I'd suspect that one. The main board controls the sound.

Mar 11, 2016 | Samsung UN60D6000 60 Inch 1080p Smart TV...

1 Answer

1991 ford explorer 4-0 flywheel in a stuck position when ignition is turn on

Suspect a faulty ignition switch or the wires on the alternator as not sure here but i think their is a connection to excite the alternator and something could be wrong here ,if i had the motor in front of me i would soon know but from afar ?

Sep 24, 2012 | 1991 Ford Explorer

1 Answer

A/C Runs Only On High

take it to a dealership please!!!! you are gonna waste money something is shorted and it may be from his repair not saying hes dumb or anything. and also it usually is just a resistor but i think he may have pinched some wires or something. i maybe wrong im only human either way good luck!!!

Jul 09, 2012 | 2006 Mitsubishi Galant

1 Answer

2005 chevrolet malibu classic turrn signal and cruise control quit working

That would be the first thing I suspected as well. If you have a voltmeter and the steering column trim panels removed and have the no blinker symptom present I'll be more than happy to walk you through some basic tests. Let me know if you have any questions and I'll do my best to answer them. Thank you for using!

I’m happy to assist further over the phone at

Feb 11, 2012 | Chevrolet Malibu Cars & Trucks

2 Answers


There is no way to adjust the timing on your car....if you suspect or have verified that the timing is off, then either something is wrong with the computer, or something has gone wrong mechanically. Fixing a timing issue is not a job advise of the at home mechanic as the Northstar engine is very complex and requires many specialized tools for its repairs.

Btw, I’m available to help over the phone in case u need at

May 13, 2010 | 1996 Cadillac DeVille

2 Answers

Control Panel Problem on a Maytag DW MDBTT79AWW

I had this same problem, ordered the replacement control panel from whirlpool. The new panel worked for two weeks, then stopped working again. OUCH!
The replacement part costs $264.34 and has no warranty if you do it yourself.
I think I am now going shopping for something other than a Whirlpool or Maytag machine. They have terrible customer service.

Feb 12, 2010 | Maytag Dishwashers

1 Answer

Antilock and traction contol on and off for no reason 0-10mph .2005 buick rendevouz.has new brake bearings/sensors.

take it back to whomever did the repair and have them fix for free. I suspect the new sensors are wrong, installed wrong, or something else. These sensors tell the brake and traction control computers what to do.

Mar 02, 2009 | 2005 Buick Rendezvous

1 Answer

Control panel dead, door is locked

heres a few ideas.
1 first check your power going to the machine the plug, inspect wires leading up to it.

3 if you are sure the control panel is dead order a new one and replace it pretty easy. only if you are sure.
4 last resort - take the top off it to get to the latch. if the latch is on the top, make sure. you should be able to get the latch from here,if not you have to take the front off too,which is a pain.

most likley the circut board in the control panel is bad and i think you have to order the whole thing, i think. remove the screw in back and look to see if any circut board can be removed by itself. to replace the controls its just a matter of a few screws and plugging things back in order.

Feb 02, 2009 | Maytag Neptune MAH5500B Front Load Washer

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3480 Answers


Level 3 Expert

85216 Answers

john h

Level 3 Expert

22486 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides