Question about Hobart A200 Stand Mixer

Open Question

First gear cog just going round and round not turning mixer at all

First gear cog was broken so I bought a new one and changed it plus I renewed all grease in the machine and put it all back together and switched it on now I only get 2nd and 3rd gear no first gear at all..

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: hobart 60 quart mixer

the motor protection board is doing its job.you should only use 1st speed to mix pizza dough.im a hobart technician and service these mixers all the time.let me know

Posted on Jan 28, 2008

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: hobart h400

Greg,email the pics--there is a oil/grease flinger that can be installed if the model is right.I need the serial #,ml #.

Posted on Jun 04, 2008

bigg t

anthony james

  • 640 Answers

SOURCE: How do you change the grease in a D-300 Hobart Mixer?

Depending how old the mixer is they used to use oil,now they use grease.Regardless it sounds like a seal is worn.Where is it leaking from?

Posted on Mar 29, 2009

Anonymous

  • 1 Answer

SOURCE: Hobart AE200 - Speed not increasing when gears changed

I Can sell you a copy for £15 + postage

Posted on May 21, 2010

Anonymous

  • 10 Answers

SOURCE: Oil leak

instead of putting a gasket on tell him to take out all of the old grease out that is what has broken down and turning into oil causing a leak and if he can repace the seal around the agitator shaft replace the old grease with a high temp bearing grease or a good quality lithium grease

Posted on May 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Runs but doesn't turn. Worm gear is not broken.


Something must be broken if the motor is turning and the planetary is not. It will be one of the following, we will start from the first point of contact with the armature
1) Worm gear broken (fuse gear) you say no teeth broken
2) Worm gear not broken but whole unbroken plastic part not gripping aluminium boss
3) Pin through worm gear broken or missing
4) Pin through centre (or bevel) gear broken or missing
5) Pin through small gear in planetary broken or missing
6) Pin through planetary hub centre shaft broken or missing

The most common ones in order of likelihood are, 1, 2, 3 and 6

Dec 29, 2014 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Drive Shaft stopped kneading dough


To give the mixer strength it has planetary gears. Something may be wrong in the gear section

Nov 26, 2013 | Bosch 800-watt Universal Plus Mixer with...

1 Answer

My motor doesnt seem to go round freely


Does the beater shaft turn when there is no load? (bowl is empty) Or it will not turn at all?

It sounds like you have a stripped gear. Your mixer has a nylon/plastic gear inside the mixer and that is 99% of the time what goes wrong. You will want to open the mixer up and inspect all of the gears, but most likely you will need to replace the worm gear, part number W10112253.

Here at MendingShed.com we sell Genuine KitchenAid parts and the items can be found on our website.

Here is a link to that gear: http://www.mendingshed.com/kawormgear.html

You may also want to replace the grease and gearbox gasket while you have the mixer opened up.

We also have a service manual posted on our website which will aid in taking the mixer apart and putting it back together properly.

Service Manual: http://lib.store.yahoo.net/lib/mendingshed/kitchenaidservicemanual.pdf

Thank you,

Colleen
Customer Service
MendingShed.com
800-339-9297

Apr 09, 2013 | KitchenAid Food Mixers

1 Answer

Gears are stuck


You need to give us a little more help with this. The "gears are stuck" The first thing that comes to mind is an assumption that you cannot turn the planetary by hand. If that is the case then you have a gear stripped and it has locked up the tower pinion gear or the bevel gear. Both are inexpensive parts and are readily available at any service center or off the internet. With that said you have to determine if you want to fix it your self (you can do it its just time consuming the first time) it will require that you tear down the mixer to it's component parts. you will need to get new gear grease a new gasket and new replacement gears. Then you have to take the mixer apart, remove the old gear grease to get at the worn parts, take the gear housing apart to replace broken parts add new gear grease and gasket and then reassemble, you will more that likely also have to adjust the speed control plate to get the mixer turning at the proper speed again. The gear grease is the kicker, you will have to buy a whole can (30 Oz.) and you will only need 6 Oz to do the re-pack. all parts for the K45SS are available on the internet plus the cost of shipping. You will also need to go to the following site and download your parts list for the mixer, that will give you the proper parts number to order and a schematic to follow along.


http://www.kitchenaid.ca/assets/pdfs/literature/Repair%20Part%20List%20-%208212369.pdf


next you will need a clear work area where you can layout the pieces of the mixer so that you can create an assembly pattern that will help you remember the way to put it
back together. you will need a non metal hammer a flat head screwdriver a Phillips head screwdriver a drift punch two rolls of paper towels an empty trash can to dump the greasy paper towels about two hours of time and a calm nature. you will have to open the mixer to determine what parts you need, then you will have to order and wait for the parts to arrive and then do the work. Another option is to take or send your mixer to a service center for repair. if there is no center near you you will have to mail it, and the cost for the service center to repair and send back is going to be $150.00 plus, check to see if you have a small appliance repair shop locally it will probably save you $50.00. If both of those are options that you do not like then it is a DIY repair, that is an easy fix but takes time to get it done. check to see if you have a local shop that will sell you the parts that you need. that will eliminate some waiting time. but the first thing is to take the mixer apart and find out what gears are FUBAR. Now all of this is dependent on weather this is a gear problem or an electric problem that is why i opened with you need to help. What happened when you made the decision that the mixer was froze up? did it make noises? did you hear the motor running but the planetary dint turn? (The planetary is where you put the beaters on). did it smoke? does it make any noise when you turn it on Like the motor humms but nothing turns (That is a gear problem) So as you can see we need some help so we can help you. let us know as soon as you can so we can get you back up and baking.

Sep 21, 2012 | KitchenAid Classic Stand Mixer

1 Answer

Hobart AE200 gave a little sproing and stopped turning on all gears (electric motor turning fine apparently). I figure ?maybe it's the tufnell cog that's broken, but I can't get the inner plate off to...


The problem you are describing if I follow right I take the grease hole plugs out take the two spanner nuts off the man shaft and the driven shaft stick gear puller jaws into grease hole and put the gear puller onthe center saft and gently raise the top case.

Apr 18, 2011 | Hobart A200 Stand Mixer

2 Answers

How much grease should I pack into a gear box of a food mixer? should all cogs be covered?


pack it full the grease seems to find a way to move a way from the gears after a while so you new grease and pack it in

May 20, 2010 | Hobart D300 Stand Mixer

1 Answer

Hobart D300 Mixer: Has no torque and no speed in any gear


You have a gear with broken teeth or one sliding out of place because the brass shims are eaten up. Hobarts have what is called a planetary, round head where the grease caps are, and there are no clutches for this planetary. These units are not made to change gears while unit is running (#1 problem of gear failure) (#2 is overloading the bowl) Hobarts need a really stiff GREASE, not oil. If you decide to take the planetary apart, get all the syrup out and replace with a stiff axel grease. It is a very difficult job replacing a gear & ALL the shims. The round head where the grease caps are can easily be removed to do this.

Jun 17, 2009 | Hobart D300 Stand Mixer

1 Answer

K-beater is stuck on our Kenwood Chef and we can't remove it


I couldn't remove the K-Beater as when I tried to turn it the whole mechanism turned with it. I couldn't even remove the splashguard! I was going to take it to the Kenwood factory (a few miles from home) but then I thought I'd give it one more go and this is what I did...
  1. Next to where the K-Beater attaches in the middle of the circular plate is a lug with a pointed-shape bolt on the end. Remove this with a spanner and the beater plus gear cog can be removed.
  2. Place some mole grips or wide pliers on a worktop and sit the cogged gear in to it and grip so that it won't turn.
  3. Now you should be able to remove the K-Beater!
Perhaps someone can suggest how to stop it happening again. I haven't attached anything since but will update this post if I have any other helpful tips.

Feb 15, 2009 | Kenwood KM400 / KM410 Chef Classic Stand...

1 Answer

Motor runs but beaters won't turn and gears will not engage or change speed


Most likely there is a broken shaft, seized bearing, or a stripped gear.

The service tech will unassemble everything and replace the necessary warn or broken parts. He will re-assemble everything, check for proper gear lash and bushing clearances, and re-pack new grease.

Jerry G.


Apr 30, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Hobart A200 Stand Mixer Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...