Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

Open Question

Changed ink cart.and will not print. - Kodak EASYSHARE 5500 All-In-One InkJet Printer

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just changed the ink cartridge and does not print


If it was working before you changed the cart make sure you removed any sealing tape on the new one. If you have then you likely have a bad cart.

Mar 11, 2009 | Samsung SF-3200 Fax

1 Answer

Brother 350c


First printing a photo takes lots of ink , it depends on the color of the photo , cyan is blue which maybe consumed more in the printing or there changes that the ink may have dried in the cart hence your getting this error ,remove cart take damp paper towel and hold the paper on the place where ink comes out gently for 20 second ,make it does not touch copper contact it may damage the cart ,make sure you check the place where ink with dry paper its usually bottom of the cart and repeat the above step with dry paper towel and try to print if you get the same error then you need to replace the cart or you can contact brother support and get cart replaced , once cart is used you need print once in week to keep cart from drying, you can use any photo paper which is compatible with printer .

Good luck....

Good luck....

Aug 24, 2008 | Brother Office Equipment & Supplies

1 Answer

Ink is out eventhough there is ink in there!


Usually printer companies do not support refilled cart , as in this the problems lies with cart ,change to original cart or replace the defective cart .

May 02, 2008 | Epson Stylus Photo R1800 InkJet Printer

1 Answer

Brother MFC 210C All-in-One Ink Cartridges


near empty message is a reminder: plz buy a new cart (but do NOT change until EMPTY). You still can print.

the ink left in an empty cart keeps the system alive when some ink is neede for the automatic cleaning cycle.
If you print until this cart is really empty air will get into the tubes and ph. That leads to faulty printings.
brother had made sure that the amount of printable ink can be consumed. The rest is for service.

Jan 31, 2008 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Color prints too dark


1. Took out the color ink cart and clean the copper contacts of the ink cart with cotton swab, make sure that you do not touch the silver nozzle .
2. Try new ink color ink carts as someime this issue came up when the ink carts are about to finish up.
3. Replace the ink carts and do not us a refill ink.

Dec 26, 2007 | HP OfficeJet D135 All-In-One InkJet...

1 Answer

My MFC-210C always says replace ink.


Try this: Unplug machine from power. Wait 5 min.  Open scanner cover and take the carts out of the holder. Close cover. Plug machine to power. Machine will cycle and demands the carts. Use all NEW carts: Insert carts as demanded and answer question shown on display.

Always print until machine STOPPS printing because of EMPTY cart. Change cart then and machine will print the rest of job!
Plz, never change carts when it says NEAR EMPTY: This will cause a lot of trouble ;-)

Nov 18, 2007 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Printer won't print in black


This could be to several reasons:
1#  The black cart contains blue ink-> Change to a brand new cart.

2# The cart assy has a bottom that is a foil. Sometimes this foil leaks.
Ink will mingle: You need a new cart assy.

Run the cleaning cycle twice after inserting a brand new bk ink cart and print out a test print. If you still see blue instead of bk the assy is leaking.
BTW the bk is darker than blue (or better cyan). You must see bk! So it seems to be the prob with the right ink....

Nov 11, 2007 | Brother Multi-Function CenterĀ® MFC-215C...

1 Answer

Edweard


Take all carts out. Close cover. Unplug machine from power. Wait a minute. Plug in machine to power. Machine demands carts. Insert new (!) cart as demanded from machine. In case when asked push 1 for YES: cart changed.

BTW:
Always print until machine stopps printing. Display says NO INK XY. After replacing the cart machine will print the rest data out of its memory.

NEVER change cart when machine says low ink (This is only a hint to buy a new cart!). At this point the cart has about one third of ink left!

Nov 01, 2007 | Brother MFC 420CN All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...