Question about Jet 3 Ultra Power Chair

1 Answer

Chair won't start. Peeps once and then displays 3 red, 4 yellow and 1 green. Would like to try to fix myself, as I am handy with these kind of things. Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Jet Master
  • 401 Answers

Sorry but it sounds like a controller fault, need new controller Strege Mobility

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Posted on Oct 10, 2017

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 29 Answers

SOURCE: pride mobility Jet 3 Ultra Power Chair 7 flashing

a 7 Flashe code. There is a joystick fault. Make sure the joystick is in the center position and then power off and on again. Check all your couplings. make sure when turning on the unit you only mash the power button for 1 sec. 2-3 sec will put the unit in "Lock out mode".
This ierror will also be present if the joystick is off center when powered up. If you experience these symptoms, you must first make sure there is no physical damage to the joystick preventing it from returning to the center position. Then turn the power off and back on again (making sure the joystick is not depressed in any direction. If the joystick repeats this error, the controler much be replaced. smithrmrm70@hotmail.com

Posted on Sep 07, 2009

Anonymous

  • 14 Answers

SOURCE: When I plug in my jet 3 ultra the ammeter reads 0.

Its showing you the voltage out put for the charger if all power lights are lit and the chager is pluged in if batteries show only 2vlts then they are no good and the will not charge up thats why amp meter is on 0

Posted on Mar 07, 2010

Neil Wood

  • 177 Answers

SOURCE: Pride Jet 2 power chair with with 3 red and 3

Hi. The fault code you have is called the "Inhibit active".
It can be caused by a blown charger fuse, which causes the charger inhibit to activate.
Also if the 3-pin charger inhibit connector is not plugged in properly, or the connector is faulty, then the charger inhibit feature will activate.
Hope this helps. Neil.

Posted on Jun 22, 2010

HoverTech

Donna Angelo

  • 232 Answers

SOURCE: Constant flashing lights,all three of

You can visit this website to find answers on what the flashing trouble indicator lights mean: http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Locate the page that has the controller used on your power chair/scooter and count how many lights are flashing to diagnose the trouble. If your insurance purchased the power chair for you, they may also cover the repairs; contact them for information.
Good luck!

Posted on Oct 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What dose red or yellow blinking lights on my jazzy pride electric power chair mean /


  1. VR2/VSI DIAGNOSTIC FLASH CODES
# OF LEDS
CODE
CAUSE
POSSIBLE SOLUTION
One red LED
1
Low battery voltage
Charge batteries
Two red LEDs
2
Left motor open
Make sure left motor is plugged into controller.
Three red LEDs
3
Left motor wiring fault
Contact your authorized Pride Provider.
Three red LEDs One yellow LED
4
Right motor open
Make sure right motor is plugged into controller.
Three red LEDs Two yellow LEDs
5
Right motor wiring fault
Contact your authorized Pride Provider.
Three red LEDs Three yellow LEDs
6
Inhibit active
Contact your authorized Pride Provider.
Three red LEDs Four yellow LEDs
7
Joystick error
Contact your authorized Pride Provider.
Three red LEDs Four yellow LEDs One green LED
8
Controller error
Contact your authorized Pride Provider.
Three red LEDs Four yellow LEDs Two green LEDs
9
Brake fault
Make sure both motors are plugged into controller.
Three red LEDs Four yellow LEDs Three green LEDs
10
High battery voltage
Contact your authorized Pride Provider.
What if the speed LEDs on the VR2/VSI begin to flash?

  • Determine if the battery charger is connected to the power base. When the battery charger is connected to the power base, a charger inhibit feature keeps the power chair from driving. This is indicated by the VR2/VSI speed
    LED(s) flashing.
  • Determine if the charger harness fuse has blown. A blown charger fuse can cause the charger inhibit to
    activate.
  • Determine if all controller connections are plugged into the power base properly. If the 3-pin charger
    inhibit connector is not plugged in properly, then the charger inhibit feature will activate.

Oct 05, 2017 | Pride Health & Beauty

1 Answer

How can I get this chair to work


Pride Mobility Products Download the trouble shooting information for your model chair.

Aug 29, 2016 | Pride New Jazzy 600 Power Wheelchair by...

1 Answer

Jet 3 Ultra kicking error code 3 red, 4 yellow, 1 green.


check connections to controller, may have damage.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

Jan 15, 2016 | Jet 3 Ultra Power Chair

1 Answer

Jazzy chair 600 3 red lights 4 yellow 1 green no power both batteries read 12.5


Have the joystick controller tested. Make sure the cable is fully seated in the chair connector.

Feb 17, 2014 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Jazzy 1107 power chair won't move


3 flashes indicate that there is a short circuit to the left motor and battery connection. Check wiring and connections

Jun 14, 2013 | Pride Jazzy 1113 ATS Indoor Power...

1 Answer

Jet 3 ultra power chair won't move


Move the freewheel levers back and forth so the chair does not move drive position

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

May 25, 2012 | Jet 3 Ultra Power Chair

1 Answer

I need the wiring for the mic


Hello,
Here is the wire diagram for several common mics in relation to a 4 pin CB. Most recent 4 pin CB's such as Midland, Cobra, Connex, Uniden, etc can use 4 pin mics. The wiring is actually depending on the mic rather than the CB so long as the CB's are 4 pin as well. Once you go back to late 80's the 4 pin design was a little different. Anything new it is simpler.
Stock Mic 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)
Astatic - 4 wire 1- Shield 2- White 3- Red 4- Black
static - 6 wire 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500 Cobra CA Series 1- Shield & Black 2- Red 3- White 4- Blue
Galaxy DC-521S - 4 wire 1- Shield 2- Yellow 3- Red 4- Black
Galaxy CB-660EI 1- Shield & Black 2- White 3- Red 4- Blue
Sadelta 1- Shield 2- White 3- Brown 4- Green
Turner RK56 Road King 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC
Regards, Tony

Apr 07, 2011 | Connex Radio Communications

1 Answer

I just replaced the batteries in my Jazzy 1170 PLUS. Now my speed control lights blink constantly and the chair is totally unresponsive.I have double checked to be sure the freewheel levers are totally...


According to my 1170 manual the flashing lights are error codes. 1 red = low batt., 2 red = left motor disconnected, 3 red = Left motor wiring fault, 4 yellow = Right motor disconnected, 5 yellow = right motor wiring fault, 6 yellow = Inhibit active, 7 yellow =possible joystick fault, 8 green = possible controller fault, 9 green = Solenoid brake fault, 10 green = high batt. voltage

Feb 13, 2011 | Pride Mobility Products Jazzy 1170 XL Plus

3 Answers

Jazzy 1121 power chair won't go


If your chair is run by a Pilot VSI controller, the error code----3 red/4 yellow/ 1 green---indicates a controller failure. I am having controller problems of a different kind on a Jazzy 1107 and it appears that few shops will work on the controller. Replacement is very costly.

Apr 12, 2009 | Heavyduty Jazzy 1121 Standard & Heavy Duty...

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

ray gallant
ray gallant

Level 3 Expert

65457 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...