Question about Casio HR-100TMPlus Calculator

Open Question

How can I replace printer tape? - Casio HR-100TMPlus Calculator

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I deal with a support message that won't go away?


Take the printer back to the retailer and get a replacement.

Mar 15, 2015 | Office Equipment & Supplies

1 Answer

Toner supply failed, remove seal tape from toner cartridge and reinstall


The cartridge inside the printer that holds the dry toner could be empty.

Or, if you have just replaced the toner cartridge, you forgot to remove a piece of "sealer" tape from the cartridge. Remove the cartridge from the printer. Remove that tape from the cartridge. Re-insert the cartridge. Try again.

May 05, 2011 | Office Equipment & Supplies

1 Answer

We have a Dymo hand held office labeler which ran out of ink. How do you replace the ink- This machine hold the 1/2 x 13 tape


No ink required. You just got bad tape cartridge. Replace with a new cartridge. This unit burns the letters into the tape.

Sep 18, 2010 | Dymo LetraTag QX50 Thermal Label Printer

1 Answer

My ps 1100 label maker prints only on black side of tape


This depends on the TAPE CARTRIDGE you have in your label printer. Apparenlty, you have a TRANSPARENT TAPE on it, and the printer prints in BLACK only.

Just replace the tape cartridge

Apr 01, 2010 | Brother P-Touch (PT1100SBVP) Label...

1 Answer

Dp8340 not printing after we replaced tape


On some of these printers the tape must be threaded thru a double set of guides for it to hold the tape correctly. If it is not threaded thru both sets of guides, it will not allow the tape to be close enough to print.

Mar 09, 2010 | Matrix Star DP8340 Receipt Printer

1 Answer

Labels are not printing clear


1. Replace the batteries (use only alcalines)
2. See if the tape is correctly inserted.
3. Clean the printer head
4. Replace the tape with a new one.
5. Check the contrast settings

Aug 23, 2009 | Dymo LetraTAG Thermal Label Printer

1 Answer

Lexmark X6170


There will be blue tape when turn the cart upside down please remove the the tape ...and check there no tape :if the printer states the same error remove the cart and check for the error if error is displayed turnoff and remove power adapter for 30 sec and reconnet it back and check for the error If displaye it printer problem..

Feb 19, 2008 | Lexmark X6170 All-In-One InkJet Printer

2 Answers

Check Printhead cleaner Path


Sounds
    1. Attempt to duplicate the message by turning the printer on, reloading the media, and printing several test prints.
    2. Note the movement and position of the carriage when the error occurs.
    3. If the carriage stops on the left-hand side (roughly 12 inches from the ink supply station), unplug the power cable from the printer, open the top cover and try to move the carriage to the right. Closely inspect the ink tubes for wear, and check for ink tube binding or catching on the tube guide (stopping/hindering carriage movement). If true, continue with the remaining steps below.

        NOTE: If the steps above do not describe the issue correctly, refer to the work instruction for a typical “Switch Power Off, Check Printhead Path” message (bpp90070).

Check/replace the Ink Tube Systemgtabtop.gif
    1. Turn the printer off.
    2. Remove the old Ink Tube System (refer to pages 8-53 of the Service Manual).


        NOTE: If the printer is installed on a Multi-roll feeder accessory, some additional disassembly is required to gain access to the printer. Instructions for multi-roll disassembly are listed at the bottom of this document for reference.
    3. Move the carriage assembly to the right side of the printer.
    4. Clean the rear tube guide assembly with a moistened lint free cloth to prepare the mounting of the Mylar tape.
      Figure 1:Cleaning the rear tube guide assembly
      c00001195.jpg
    5. Remove the backing on the Mylar tape and align the line on the tape with the front edge of the rear-tube guide so that the narrower section is towards the front of the printer. Do not attach the tape yet.
      Figure 2:Aligning line on Mylar tape with front edge of rear-tube guide assembly
      c00001196.jpg
        NOTE: Ensure that the Mylar film is perfectly aligned with the rear Tube Guide surface with no protrusions or unevenness.
    6. Carefully position the Mylar tape about 1/4 of an inch from the left-end of the rear-tube guide (do not go all the way to the end as the beveled edge will cause crimping of the tape).
      Figure 3:Attaching the Mylar tape
      c00001197.jpg
    7. Ensure tape is evenly positioned and any air bubbles are smoothed out along the tape.
      Figure 4:Smoothing out the air bubbles along the Mylar tape (view from rear of printer)
      c00001198.jpg
    8. Carefully fold under the narrow section of the tape to the underside of the rear tube guide assembly and smooth out any air bubbles.
      Figure 5:Installing Mylar tape under rear-tube guide assembly (view from front of printer)
      c00001199.jpg
    9. The Mylar tape should look like the image below.
      Figure 6:Final installation of Mylar tape (view from top of printer)
      c00001200.jpg
    10. Once the Mylar tape is installed, install the new Ink Tube System (refer to pages 8-53 of the Service Manual).
    11. Following replacement, verify printer functionality.
like a bad belt.

Feb 11, 2008 | HP DesignJet 1050c InkJet Printer

2 Answers

Printing


I was having the exact same problem & had lost my user's manual (you can go on the Dymo.com website to download a replacement). The !!!!!!!!!! display means that there probably is a tape jam. Here's what the manual says:
*!!!!!!in the display indicates that the tape can not be transported *Press any key to return to normal display *Check if there is a tape jam. In that case, life out the cassette and carefully release jammed tape. Cut off excess tape and refit/replace the cassette *If there is no tape jam replace the batteries

Nov 05, 2007 | Dymo LetraTAG Thermal Label Printer

Not finding what you are looking for?
Casio HR-100TMPlus Calculator Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...