Question about Epson Stylus Photo RX600 All-In-One InkJet Printer

2 Answers

One of the inks doesn't work -epson rx 620

I can't get the lt magenta working, no matter how many times I clean the heads or do nozzle check patterns. I cleaned out the pads underneath, loaded software to do that, worked good for awhile, then this happened. I changed the cartridge 4-5 times -when I take them out, the ones that have windows look empty, though the computer & printer say it's full. Help!

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Epson Master
  • 1,113 Answers

I am, and I'd say you've hit the nail on the head non OEM or non OEM ink in the past, has traveled it's way along the system to the print head filters and clogged them, virtually impossible to clean such microscopic filters and holes, and very tricky even to get apart. The fix really is to replace print head and reprime with gen ink, not cheap if not under warranty.

You can try magic wand stuff and spin the wheel and try your luck but I never sent you OK!

search print head cleaner, ie

or my favourite bandaid, Fill the purge station with windex, let sit parked up for a day, run 20 cleans with new gen ink, and pray!

My other favs include, go to shop and buy new and dont buya non gen. inks

Posted on Dec 24, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have found that if you are using compatible inks that sometime sooner or later that a head will clog up 'If ou are using OEM inks then I am not equiped to advise. Good Luck

Posted on Dec 23, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove and clean the printhead from a canon pixma mp780?


Hi there. i understand that you want to clean the printhead of your canon pixma mp780, dont worry im here to help you out with this.
do this following steps in order for you to clean the printhead.If the printed Nozzle Check Pattern is broken, missing, or a specific color is not printed, clean the print head.
  1. Press the <Menu> button on the printers operation panel repeatedly until [MAINTENANCE] appears in the LCD.

  2. Press the left [<] or right [>] arrow buttons to select the cleaning setting you want. Select [HEAD CLEANING] or [HEAD REFRESHING] for deep print head cleaning.

    Take Note: [HEAD REFRESHING] uses more ink than [HEAD CLEANING], so perform [HEAD REFRESHING] only when necessary ok?

  3. Press the <OK> button.

  4. Print a Nozzle Check Pattern and perform at least two Head Refreshings if the pattern is not correct.
hope that this steps helped you a lot in cleaning the printhead of your printer.Good Luck!

May 30, 2011 | Office Equipment & Supplies

1 Answer

I have a Canon Pixma MP270 and I can only print in colour both the black and colour lights are lit up on the printer


f print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply. Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so clean the Print Head deeply only when necessary.
1. Make sure that the power is turned on.

2. Clean the Print Head deeply. (1) Press the g0022565.png (Maintenance) button repeatedly until y appears. g0054776.png
(2) Press the Black or Color button.
The machine starts cleaning the Print Head deeply. Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This takes about 2 minutes.

3. Check the print head condition.

When the deep cleaning is completed, the LED returns to the copy standby mode. To check the print head condition, print the nozzle check pattern.

See " Printing the Nozzle Check Pattern".

If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours.
If the problem is still not resolved, replace the FINE Cartridge with a new one.

See " Replacing FINE Cartridges".
If the problem is still not resolved after replacing the FINE Cartridge, contact the service center.

Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.

NOTE If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE Cartridge whose ink is low.
See " Replacing FINE Cartridges".



You need to prepare: a sheet of A4 or Letter-sized plain paper

1. Make sure that the power is turned on.

2. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.

3. Open the Paper Output Tray gently, and open the Output Tray Extension.

4. Print the nozzle check pattern.

(1) Press the g0020617.png (Maintenance) button repeatedly until A appears. g0054754.png
(2) Press the Black or Color button.

The nozzle check pattern will be printed.

5. Examine the nozzle check pattern.
See Examining the Nozzle Check Pattern.

Examining the Nozzle Check Pattern

Examine the nozzle check pattern, and clean the Print Head if necessary.

1. Check if there are missing lines in the pattern (1) or horizontal white streaks in the pattern (2). g0054755.png (1) Check if lines are missing in this pattern. If yes, the cleaning is required.
See " Cleaning the Print Head".

g0020623.png
(A) Good
(B) Bad (lines are missing)

(2) Check if horizontal white streaks are present in this pattern. If yes, the cleaning is required.
See " Cleaning the Print Head".
g0020621.png
(A) Good
(B) Bad (horizontal white streaks are present)
Post back!

Oct 26, 2010 | Canon Office Equipment & Supplies

1 Answer

Have an iP90, but the color ink won't print.


Hi there,
When Printing Becomes Faint or Color are Incorrect, the Print Head Nozzles are probably clogged.
Follow the procedure below to clean the nozzles.
Step 1 : Printing the Nozzle Check Pattern.
Print the Nozzle Check pattern to determine whether the ink ejects properly from the Print Head Nozzles.
a) Using RESUME/CANCEL button.
I) Ensure that the printer is turned on, and then load a sheet of Letter Paper.
ii) Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, and then release it immediately.

b) Windows
i) With the printer on, load a sheet of Letter-sized plain paper in the printer.
ii) Open the Printer Properties.
iii) Print the Nozzle Check Pattern.
Click the Maintenance Option from the Menu.Then click Nozzle Check from the pop-up menu. Then click Print Check Pattern.
iv) When the confirmation message is displayed, click OK.
v) Confirm the nozzle check pattern.

Examine the Print Nozzle.

Step 2 : Cleaning the Print Head.
a) Cleaning the Print head using RESUME/CANCEL button.
i) Ensure that the printer is on.
ii) Hold down the RESUME/CANCEL button until the POWER lamop flashes once, and then release it.
b) If you pressed the Cleaning button on the Examining the Nozzle.
Check Pattern screen displayed after the nozzle check patter was printed, start the Print Head cleaning procedure.
i) Ensure tha that the printer is on.
ii) Open the Printer Properties dialog box.
3) Start Print Head Cleaning,
- Click the Maintenance tab.
- Click Cleaning.
- Select the Print Head to be cleaned, and then click Execute.
iv) When the confirmation message is displayed, click OK.
Print Head cleaning starts when the POWER lamp starts blinking,
Important : Do not start any other operations until the Print Head Cleaning finishes. This takes about 60 seconds.
4) Check the Print Head condition.
i) Click the Print Check Pattern in the nozzle Check dialog appeared after cleaning are done. When the confirmation message is displayed, click OK. A nozzle pattern will be printed. Do not perform any operation until printing is completed.
ii) Observe the printed nozzle check pattern to check the Print Head condition.
iii) If the problem persists after you perforned Print Head normal cleaning 3 times, execute Print Head deep cleaning.

Step 4 : Print Head Deep Cleaning.
If print quality does not improve by standard Print Head cleaning, try Print Head deep cleaning, which is a more powerful process and comsumes more ink.

1) Ensure that the printer is turned on.
2) Open the Printer properties dialog box.
3) Start Print Head Deep Cleaning.
i) Click the Maintenance tab.
ii) Click Deep Cleaning.
iii) Select the Print Head to be cleaned, and then click Execute.
iv) When confirmation message is displayed, click OK. Print Head deep cleaning starts when the POWER lamp starts blinking,
Important : Do not perform any other operations until the Print Head deep cleaning is completed ( about 2-3 minutes).
4) Check the Print Head condition
i) Print a nozzle check pattern to check the Print Head condition.
ii) If the problem persists, perform step 3 again.
iii) If the problem persists, the printer may have run out of ink.
Replace the ink tank.
iv) If the problem persists, the Printer Head may be damaged. Contact your dealer or Canon Customer Care Center.

Hope this helps.
Have a good day.




















Dec 04, 2009 | Canon PIXMA iP90 Mobile Printer

1 Answer

Problem with printing - streaks yellow and green not all colours are printing, not used for some time but new cartridges have been put in


Follow these steps to print a nozzle check:

  1. Turn off the Stylus CX.


  2. Load letter-size paper in the sheet feeder.


  3. Press the cp_button_48_er.gif ink and cp_button_1.gif On buttons together and hold them down for about 3 seconds.

    The Stylus CX turns on and prints a test pattern, which includes anozzle check. Shown below are some examples of what the nozzle checkmay look like.

    Nozzle check pattern with no gaps im_158_er.gif
    Nozzle check pattern with gaps im_159_er.gif

If any of the colors is missing, perform a head cleaning routine. It appears that the magenta head is having some problem. Try printing again after performing a head cleaning task. If the problem continues you might need to replace the head.

Thank you.

Oct 11, 2009 | Epson Stylus DX4200 All-In-One InkJet...

1 Answer

I HAVE A CANON MP 760 PRINTER THE MAGENTA COLOUR LINE IS TWO TONED WITH DARK AND LIGHT PINK . SO WHEN PRINTING PICTURES THERE IS DISTINCT LINES CAN SOMEBODY HELP HAVE TRIED THE CLEANSING REPLACED THE...


You need to conduct the following steps:
Printing the Nozzle Check Pattern
The nozzle check pattern shows if each print head nozzle is operating properly.

You can also print the nozzle check pattern from your computer.
  1. Load A4- or letter-size plain paper in the Auto Sheet Feeder (ASF) or cassette.
  2. Press <Feed Switch> button to select the paper source.
  3. In either COPY, PHOTO, or FILM menu screen, press <Menu> button.
  4. Press the left or right arrow to select [Maintenance/Settings], then press <OK>.
  5. Use left or right arrow to select [Maintenance] and press <OK>.
  6. Use up or down arrow to select [Nozzle Check] and press <OK>.
  7. When prompted to print a nozzle check pattern, use the up arrow to select [Yes] and then press <OK>.
    The machine prints a nozzle check pattern
Print Head Cleaning / Head Refreshing
If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the print head.
MEMO:
a. Cleaning the print head consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks.
b. Print head cleaning is performed when you connect the power cord. Your machine may perform print head cleaning periodically to avoid clogging.
  1. In either COPY, PHOTO, or FILM menu screen, press <Menu> button.
  2. Press the left or right arrow to select [Maintenance/Settings], then press <OK>.
  3. Use left or right arrow to select [Maintenance] and press <OK>.
  4. Use up or down arrow to select [Print Head Cleaning] or [Head Deep Cleaning] as necessary and then press <OK>.
When prompted to clean the print head, use the up arrow to select [Yes and then press <OK>.

IMPORTANT:
If normal print head cleaning does not improve print quality, perform deep print head cleaning.
Print Head Alignment in Windows
If colors mix or streaks appear in the nozzle check pattern, perform the print head alignment.
The print head alignment can be performed either automatically or manually.
If the automatic print head alignment does not resolve the problem, perform the print head alignment manually.


Your feedback is very important to us, please do not forget to rate my service for the site to continue helping everyone and improve on it.
I thank you for the opportunity to help and please do not hesitate in contacting me for any further questions…god bless

Aug 09, 2009 | Canon PIXMA MP760 All-In-One InkJet...

2 Answers

Can you help? After changing the cartridges, I keep getting a message about the ink head being incorrect...I am directed to press 'OK' which does not help; then to turn printer off and on again, which...


Cleaning your head might resolve your problem. Perform the below steps to clean the head:

Print Head Cleaning / Head Refreshing If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the print head (Cleaning) or print head deep cleaning (Deep Cleaning). Note:
  1. Cleaning the print head consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks.

  2. Print head cleaning is performed when you connect the power cord. Your machine may perform print head cleaning periodically to avoid clogging.
Overview:
Step1:
Print the Nozzle Check Pattern.
To check whether the print head nozzles are clogged, print the Nozzle Check Pattern.
downicon.gif If the print quality is poor, perform print head cleaning.
Step 2:
Perform print head cleaning.
This unclogs the print head nozzles
Print the Nozzle Check Pattern again.
To check whether the print head nozzles are clogged, print the Nozzle Check Pattern.
If the print quality is still poor, perform two print head cleanings.
downicon.gif Print the Nozzle Check Pattern again.
Step 3:
Perform deep print head cleaning.
This is a more powerful cleaning.

Displaying the Maintenance screen
  1. Ensure that the printer is powered on.

  2. Press the <Menu> button.

  3. Press the left or right cursor to select [Maintenance/settings], then press <OK>.

  4. Press the left or right cursor to select [Maintenance], then press <OK>.

Print Nozzle Check Pattern
  1. Press the Open button to open the output tray.

    mp500_openbutton.gif

  2. Load letter-sized plain paper in the auto sheet feeder (ASF) or the cassette.

  3. Display the Maintenance screen on the printer.

  4. Press the up or down cursor to select [Nozzle check], then press the <OK>.

    mp800_nozzlecheck.gif

  5. Press the up or down cursor to select [Yes], then press <OK>. (The nozzle check pattern is printed.)

  6. Confirm the nozzle check pattern.
05sj00160_03a.gif 05sj00160_03b.gif < 1 > The normal nozzle check pattern
< 2 > The abnormal nozzle check pattern
< 3 > Some black ink lines are broken.
< 4 > White lines are present in the color ink pattern.
< 5 > Both black and color inks are not present.

Note:
  1. When all patterns are printed normally, press the up / down cursor button to select "All A" and press the OK button.

  2. When any patterns are printed abnormally, press the up / down cursor button to select "Also B" and press the OK button.
Print Head Cleaning:
  1. Display the Maintenance screen on the printer.

  2. Press the up or down cursor to select [Cleaning], then press <OK>.

    mp800_cleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head cleaning.

    Note:
    Do not do any other operations until print head cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.
Deep (Print Head) cleaning:
  1. Display the Maintenance screen.

  2. Press the up or down cursor to select [Deep cleaning], then press <OK>.

    mp800_deepcleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head deep cleaning.

    Note:
    Do not do any other operations until print head deep cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.

    Note:
    If the printed result does not improve even after doing print head deep cleaning, turn off the printer. Then, after 24 hours or later, do print head deep cleaning again. (After a given time interval, ink could dissolve itself, resulting in ink unclogging.)

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Apr 22, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

New ink cartrage


Print Nozzle Check Pattern
  1. Press the Open button to open the output tray.

    mp800_openbutton.gif

  2. Load letter-sized plain paper in the auto sheet feeder (ASF) or the cassette.

  3. Display the Maintenance screen on the printer.

  4. Press the up or down cursor to select [Nozzle check], then press the <OK>.

    mp800_nozzlecheck.gif

  5. Press the up or down cursor to select [Yes], then press <OK>. (The nozzle check pattern is printed.)

  6. Confirm the nozzle check pattern.
05sj00160_03a.gif 05sj00160_03b.gif < 1 > The normal nozzle check pattern
< 2 > The abnormal nozzle check pattern

< 3 > Some black ink lines are broken.

< 4 > White lines are present in the color ink pattern.

< 5 > Both black and color inks are not present.
Note:
  1. When all patterns are printed normally, press the up / down cursor button to select "All A" and press the OK button.

  2. When any patterns are printed abnormally, press the up / down cursor button to select "Also B" and press the OK button.
Print Head Cleaning:
  1. Display the Maintenance screen on the printer.

  2. Press the up or down cursor to select [Cleaning], then press <OK>.

    mp800_cleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head cleaning.

    Note:
    Do not do any other operations until print head cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.
Deep (Print Head) cleaning:
  1. Display the Maintenance screen.

  2. Press the up or down cursor to select [Deep cleaning], then press <OK>.

    mp800_deepcleaning.gif

  3. Press the up or down cursor to select [Yes], then press <OK> to start print head deep cleaning.

    Note:
    Do not do any other operations until print head deep cleaning is completed.


  4. Print the nozzle check pattern and check the print head status.

    Note:
    Ifthe printed result does not improve even after doing print head deepcleaning, turn off the printer. Then, after 24 hours or later, do printhead deep cleaning again. (After a given time interval, ink coulddissolve itself, resulting in ink unclogging.

Jan 08, 2009 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

IP4300 only recognizes magenta OR cyan


1. Get compressed air
2. Run Printhead under HOT water, do not worry about contacts getting slightly wet.

3. Blow compressed air with straw attachment into screens where the cartridge nozzle sits on printhead. then let it sit and dry.

4. reinstall print test page

5. if this fails open paint/photoshop and print a page of the color that is not printing correctly. rinse and repeat until colors flow freely.

I have several ip4300s and I have yet to give up the ghost on a printer with a clog ujsing this method.

Jan 04, 2009 | Canon PIXMA iP4300 InkJet Photo Printer

2 Answers

Epson Stylus R230 Light Magenta Not working


Print first a nozzle check pattern, self test which they say. Check your manual for your printer, it should be accessible from that if you dont have any manual, go to the epson website and download a manual. Usually the self test would go like this.

While the printer is turned off, you press and hold down the paper feed button, continue holding it down while turning on the printer. It will print the nozzle check pattern standalone. If you see all the colors then the issue your having is a color management issue, if you do not see the cyan, magenta, yellow, black, light magenta and light cyan from that test; then you will need to do 3 consecutive times of Head Cleaning from the maintenance program in your computer. If you have a windows xp it goes like this.

Click on start go to control panel - printers and faxes -
you right click on your printer icon and select printing prefrences. From there, go to maintenance tab and click head cleaning, go through that cycle 3 consecutive times and see if it improved. Good luck....

Jun 12, 2008 | Epson Stylus Photo R300 InkJet Printer

Not finding what you are looking for?
Epson Stylus Photo RX600 All-In-One InkJet Printer Logo

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Inky Fingers
Inky Fingers

Level 3 Expert

705 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...