Question about Optoma Office Equipment & Supplies

1 Answer

I have a optoma dlp home theater projector when I hit the menu button won't let me go on display or image sometimes keypad locks up have to restart projector

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 35 Answers

Hi
Please keys become hard .try to get replace by expert

Posted on Mar 23, 2016

Ad

5 Suggested Answers

Anonymous

  • 14 Answers

SOURCE: Upside down projection

Download the latest display driver for your video card. If you are using ATI vc's then download and install the Catalyst Application which will allow you to rotate the screen orientation .

Posted on Jun 20, 2007

Ad

Anonymous

  • 396 Answers

SOURCE: DLP Projector connection to Laptop

you need to go to te control pannel and go to display settings then manually select the external monitor then hit apply it will open on your projector

Posted on Nov 02, 2009

projdoc

jasbo

  • 2239 Answers

SOURCE: The Buttons are locked on my DX625 DLP Projection Display

you'll need the remote to unlock them. go into the menu, settings, key lock, unlock. if the remote is lost or locked, too, you'll have to contact a service center.

Posted on Dec 28, 2009

Anonymous

  • 1 Answer

SOURCE: How to connect the Optoma Pico PK-101 DLP to a laptop

You have to buy a 17€ converter.... here on my website, is a diagramm on the B chapter that explain a lot.
http://shadar.spacequadrat.de/?p=121#more-121

Here is the link to buy one converter
http://shop.ebay.fr/i.html?_nkw=pc+VGA+to+converter&_sacat=0&defsort=15&LH_BIN=1&_sop=15&_odkw=pc+to+converter&_osacat=0&bkBtn=&LH_ClassifyToggle=0&_trksid=p3286.m270.l1313

Posted on May 13, 2010

cracker jack

  • 2 Answers

SOURCE: Help! Our Optoma DLP

There is a lense behind the main focus lense that's causing this. Flakes of the colored tint are coming off causing white light to shine through. If you look at your projection, you can see black spots as well, these being the flakes that have re-located themselves. I dug into mine deep enough to diagnose this, to actually replace the little lense would be a little tricky. The unit has to be mostly disassembled. Also I haven't been able to locate a vendor who sells the part. Optoma wants you to send it in so they can do the repair, and won't part w/ these component level parts.

Posted on Nov 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Image is upside down how do i turn image right side up


Go into the menu then the display option. It's probably set for "ceiling mount"

Nov 13, 2014 | Mitsubishi HC3800 1080p Home Theater DLP...

2 Answers

Optoma ep706 cannot access image menu


From the remote or the projector button?

Oct 17, 2014 | Optoma EP706 DLP Projector

1 Answer

WHY DOES MY HD OPTOMA DLP 70 TURN OFF AFTER FEW MINUTES?


If you have recently replaced the bulb you may need to reset the lamp counter in the projector menu.
If you have not replaced the bulb, the projector may be shutting down due to over-heating. Check that the projector is clear of as much dust and debris as possible.

Sep 03, 2014 | Optoma Hd70 Dlp Hd High Definition 720p...

1 Answer

Where is the 10v 3300uf capacitor on the power board for an Optoma HD66 image?


It will be difficult to get. If the space allows, you can use 3300MFD 16V capacitor in place.
Electro help

Aug 29, 2014 | Optoma Hd66 3d Ready Dlp Home Theater...

1 Answer

Does the Optoma HD20 DLP projector have a air filter?


yes, any projector with a air filter.

if your projector often make overtemperature protection, you have to inspect the air filter,whether it is still clean, otherwise, you need to replace it.

Jul 09, 2014 | Optoma Hd20 High Definition 1080p Dlp Home...

1 Answer

Projector powers up as normal, bulb comes on, displays Optoma logo on screen and menu will show on screen. The issue is that although I have 3 devices plugged into the HDMI port of the device using a HDMI...


There is a source lock and source button I would unlock source lock button and the push source button until you get to your hdmi input you are using. You also may just plug in one input first and once you get the input right play with the multiple hdmis

Aug 11, 2011 | Optoma HD20 DLP Projector

1 Answer

Cannot get menu to come up. Keypad seems locked. How do I unlock it? Thank you for your help.


press the "Enter" key on the control panel for 7 seconds to turn it on again

Mar 17, 2011 | Optoma HD65 DLP Projector

1 Answer

I have an OPTOMA H27 projector, I am experiencing problems with the quality of the video images displayed. I set the focus by using the internal menu as an image reference. However when I view DVD/Video...


hi,
if u are using the composite video the try component video. composite video will dive u a dull image than component one. also check the distance between the projector an screen.Make sure the projection screen is between the required distance 4.9 to 40.7 feet (1.5 to 12.5 meters) from the projector.
ok

Dec 30, 2010 | Optoma H27 DLP Multimedia Projector

1 Answer

The image of my optoma hd803 became inverted.


Go into menu settings, look for a menu item that has to do with screen size and orientation. You'll be looking for the option to rotate the image for mounting the projector upside down on a ceiling mount.

Feb 06, 2010 | Optoma HD803 DLP Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Optoma Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

157 Answers

Are you an Optoma Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...