Question about Samsung LN52A650A LCD TV

1 Answer

When trying to turn my tv on the unit chimes then there is a click then the chime then a click & this cycle repeats 10 or 12 times until the tv finally powers up. Is this a power supply problem?

The problem only occurs after the tv has been idle for a period of time. After the unit has been on and warmed up it powers down and up with no problems.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 76,204 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Apr 06, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clock chimes on the 1/4, but hour chimes just once. When i use the lever on the side, it will chime the proper hour, but when the clock is running only the one time on the hour.


The next time it chimes multiple times turn the hour hand clockwise until it is pointing at the number of times it gonged. Next take off the dial nut off (make sure to put it in a plastic bag because they can be hard to replace) and turn the minute hand until it chimes signaling 15 minutes after. Now put the minute hand back on pointing to 3 o'clock and replace your dial nut and you are all set.
Fix Clock That Gongs Wrong

Jan 18, 2017 | Chime Home

1 Answer

How to reset a chime clock


The next time it chimes multiple times turn the hour hand clockwise until it is pointing at the number of times it gonged. Next take off the dial nut off (make sure to put it in a plastic bag because they can be hard to replace) and turn the minute hand until it chimes signaling 15 minutes after. Now put the minute hand back on pointing to 3 o'clock and replace your dial nut and you are all set.

Fix Clock That Gongs Wrong

Aug 20, 2014 | Home

1 Answer

The chime of my Howard Miller mantle clock are not w/the actual hour set.How can I reset the chimes? Daylight Savings time has messed me up.


The next time it chimes multiple times turn the hour hand clockwise until it is pointing at the number of times it gonged. Next take off the dial nut off (make sure to put it in a plastic bag because they can be hard to replace) and turn the minute hand until it chimes signaling 15 minutes after. Now put the minute hand back on pointing to 3 o'clock and replace your dial nut and you are all set.

Fix Clock That Gongs Wrong

Nov 06, 2011 | Seiko Mantel Clock

1 Answer

How to turn off the alarm.?


Hi pink_jean24,

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

May 14, 2011 | Timex 1440 Nylon watch

1 Answer

How do i synchronize my chimes on a westminster quartz abacus 401c wall clock


If it is like mine you press the test button until you hear the chime. Wait for the hour chime to go and count it. If it chimes once for 1PM and you need it set to 6PM then you press the test button to reset the chime and repeat press the button 5 times. This will set the chime to 6 PM. If you get lost on the time press until it makes no noise. This means you are 11PM or later and continue to then press until it makes noise again. Count the hour chimes and you are at the count in the AM. Repeat the steps and keep pressing to get to the proper AM or PM hour count..

Jan 16, 2011 | Watches

3 Answers

Mantel Clock With Westminster/Whittington Chime: How to set the chime properly...


Pressing the red button advances the chime count by one. Continue to advanced the chime count until it matched the hour shown on the clock face.

May 18, 2010 | Seiko Mantel Clock

3 Answers

I NEED THE INSTRUCTIONS FOR SETTING THE CHIMES/TIME ON MY WESTMINSTER LINDEN MANTEL CHIME CLOCK


Manually turn the minute hand forward until the 16 westminster chimes sound and then the hour strikes. Then remove the minute hand (it will go on in four positions) and put it back on at the 12 o'clock position. The chimes should now be back into sync.

Fred

Apr 05, 2010 | Seiko Mantel Clock

1 Answer

Timex 1440 sports watch. How do you turn off the chime on the hour every hour?


Hi aburns983,

You can easily change the time and turn off the chime of your Timex watch by following the steps below.

1. With the time and date showing, press the top left button.

2. Press the right top button (this sets seconds).

3. Press the bottom left button. This flashes the hour; press the top right button until you have the correct hour (there is no symbol for am, pm will show if pm).

4. Press the bottom left button, minutes flash. Press the top right button until correct minutes.

5. Press the bottom left button, month flashes. Press the top right button until correct.

6. Press bottom left button, date flashes. Press the top right button until correct.

7. Press bottom left button, day flashes. Press right top button until correct.

8. Press bottom left button, time format flashes (can be set to 24 hour clock). If correct, you're done. Press top left button if you're done (can be pressed at any step if you're finished).

To turn off the chime and alarm: Press bottom left until in the alarm screen. Then press the top right button repeatedly until the CHIME or CH symbol is gone and/or ALARM or ALM to disappear, then press the bottom left button to go back to main time.

Hope it helps.

Thank you for using FixYa.

Nov 05, 2009 | Timex 1440 Nylon watch

Not finding what you are looking for?
Samsung LN52A650A LCD TV Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...