Question about Hitachi 42HDS69 42 in. Plasma Television

Open Question

Tv turns on but stays on standby

Tried to set a remote to turn tv on and off. Thought it was set up but now TV does not turn on. It stays on standby with red light staying on.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: my power light on hitachi lcd is flashing red and

Sadly to the end I can now explain the "problem" of my question by myself ...
Because I'm was not sure if I can handle the "problem" by myself I gave the Screen to a technican at our City with all the Information I found until this point (By the way my suspicion was the defect of something at the power supply unit). Two days later he gave me a call with the information about the error: An error at the power supply unit - spare parts => 50€, Work => 200€).
Unhappily im not yet got at soldering on screens, but for 250€ i would have made a good course for this (and if I can establish i will learn it).

So now again a bit more objectively:
Error / Problem:
TV - Step 1: Power Off
TV - Step 2: Stand-By
TV - Step 3: Power-On
TV - Step 4: Short flashing picture
TV - Step 5: Reverse to Step 1

Solution:
1. Find the defect Fuse/Safe/...
2. Buy the Spare part at eshop2.euras.com
3. Change the parts -> et voilá

Hopefully I could have been a little help for someone.
With kind regards,
NatureOneFreak

Posted on May 30, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: Hitachi Ultravision won't turn on

it is the power board in the tv hase some bad capasators in it but can cost some money to fix if unsher how to do it on your own if you live in central new york i do have my own shop and im cheep but i can not warenty any thing but i can help 315-280-0508 storm electronics ask for corey

Posted on Aug 04, 2009

Anonymous

  • 647 Answers

SOURCE: my hitachi 50vs69a tv wont turn on and after afew blinking red li

Have you replaced the lamp? Unplug the set remove the lamp and see if it's blown

Posted on Sep 20, 2009

welcomejee

Shahid Electronics

  • 10594 Answers

SOURCE: when i turn the tv on the screen stays black and

Lamp light lit, that means TV needs new lamp.
Replace lamp in TV as existing lamp is dead/ broken.
Thanks.

Posted on Dec 06, 2009

Testimonial: "Thank you "

moshe abada

  • 100 Answers

SOURCE: hitachi l32hp04u a my

hello coopa mark, usully it indicates on a powwer suplly problem.
some times its a bad capacitors

Posted on Feb 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv stuck on standby


The internal power supply may have failed.

Nov 04, 2013 | Televison & Video

1 Answer

Tv will not stay on standby timer light flashing


On Sony the standby or red is for shutdown---

If you unplug the set and plug it back and turn it on and it repeats this look to see if the light is either constantly blinking or blinking a specific number of blinks---specific number would be an error code.

Apr 29, 2012 | Televison & Video

1 Answer

I can't program the remote to work for my tv


Try these codes. Proceedings are given. Switch OFFthe set and Switch it ON, each time, and wait till the standby light at the front of the TV to OFF.

Codes to check are.
0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
    If you can't set up it by the above proceedings, just go to Code Search Method. If your remote have a code to synchronise your TV, code search method should work. If not, there is no hope.
    CODE SEARCH METHOD
    1. Manually turn on the device (TV, VCR, etc.) to be controlled.
    2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
    3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
    4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
    5. Press and release MUTE to install the code. The indicator light goes off.
    Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search

Apr 20, 2012 | Radio Shack 3 in 1 Universal Remote

1 Answer

I cannot turn TV off from remote. It makes the picture go out but red light is still on. Have to unplug the TV to turn it all the way off.


red light stays on because tv is in standby mode when switched off by the remote, should be an on/off switch on the tv body somewhere

Sep 10, 2011 | Hitachi Televison & Video

2 Answers

Is the red light suppose to stay on when you turn off the tv with the remote?


Yes it is supposed to stay on. This is the standby light. The television still draws power as do many electronic devices when not turned on and when in standby. If you do not want the red light to stay on you will have to unplug the television.

May 09, 2011 | Samsung LN32A330 32 in. LCD TV

1 Answer

Magnavox 15MF237 LCD - stuck in standby


just one idea.. some set you may program to stay on in case you use cable box and when you turn on the box tv turn on same time but may be defective tv there is relay,transistor and the micro that may be bad so check your settings again ... Good luck

Apr 10, 2008 | Televison & Video

2 Answers

Red led stays on after turning off.


Aren't you talking about the standby led? cause that is perfectly normal... when it's on it means you can turn the TV on by remote, usualy it goes away when you turn the TV off manualy by pressing the OFF button on the set, but is this really your problem?

Jun 23, 2006 | Hitachi 53FDX20B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 42HDS69 42 in. Plasma Television Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...