Question about Linksys Computers & Internet

Open Question

Hi I wonna to ask that how to config fariya service into linksys router

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Bob Duker

  • 96 Answers

SOURCE: linksys router wrt54g

To connect your computer to the router, all you should need to do is to connect the cables in one of the numbered ports on the router and then reboot your computer so that it pulls an IP address from the router.

Satelite Internet service vareis greatly from the normal setup required of cable or DSL providers, so perhaps you should contact your internet providers support technicians as those calls are free.

As for the gaming ports; in the menu of your router, you will find the port forwarding option available. Simply enter the ports you use to play those games with and you will be able to open them up for better game playing. Test it a few times to make sure you have the settings right, but it is normally fairly simple and understandable even if you haven't read the manual before.

Posted on Jul 13, 2008

Ad
kakee

Michael Galve

  • 1269 Answers

SOURCE: timeing out

Try to reduce the MTU on the router's settings. Open the setup page of the router. Launch your browser like IE or Mozilla. Type on the address bar http://192.168.1.1 and press Enter. It will prompt you for username and password. By default, there is no username. On the password field type admin and press enter. Look for MTU under the Setup tab. By default it is on Auto. Set it to Manual and change the MTU size to 1463 (default is 1500). Then click on Save Settings button on the bottom. If it saved it, turn off the router for 30 secs then power it back on. Check your gaming again. Hope this helps.

Posted on Jul 14, 2008

Anonymous

  • 112 Answers

SOURCE: how i configer my router so i can watch my camara anywhere.

1. DHCP is enabled by default; there is no need for IP settings in LAN connection.
Open Internet Explorer and write “192.168.1.1” in address bar and press enter.
There must not be any proxy setting in the internet Explorer.
2. Following Screen will appear. Enter the Pass word 1234 and press Login.
3. Next screen is for changing the pass word of DSL Router. Ignore this for retaining default
Password by pressing ignore.
4. Next Screen is for wizard setup. Select “Go to Advanced setup” and press Apply
5. Following Screen will appear. Select “Network" on the left.
6. Select “WAN” and “Internet Connection” Tab. After filling the parameters given in the
windows, Press Apply.
7. Select “Advanced/ Dynamic DNS” and check “Active Dynamic DNS”, Press Apply.
8. Select “ UPnP” and check “Active the Universal Plug and Play(UPnP) Feature”, Press
Apply
9. Check the assignment of IP Address under WAN Information.
Your installation is completed. Browse any web site to check the successful installation.
if your problem solve then good if not find out more
send me your e-mail adders i will send you with pic configuration
my e-mail is
taki707@yahoo.com

Posted on Dec 13, 2008

Sparky2012

Sergio Shamshoian

  • 102 Answers

SOURCE: Linksys Routers lose setup

I Had to replace a Linksys for a client because every time was a power outages the router was losing the setup. So try unpluging the power supply.

Posted on Jan 06, 2010

govinda123

Prashant M

  • 2277 Answers

SOURCE: I'm trying to get into my router config settings

Is there any computer connected to the router ?
If not then connect the computer to the router.
Check the Ip address and default gateway number on that computer. Default gateway will be the IP address of the router. You can use this number to open the set up page of the router.
First try to ping the Default gateway number and check if you get replies from that number.
If you get replies from that number then your computer is communicating with the router.
try to open the set up page of the router.
If you are not able to open it then try this.
On a windows computer, go to START. go to RUN and in the run box type http://192.168.1.1 ( consider the default gateway is 192.168.1.1) and check if that prompts you for user name and password.

Click here for more information about the router and networks

Posted on Feb 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fariya dialer setting for linksys wrt320n


I don't know about Fariya's service in Karachi--it's some sort of fiber-optic broadband service.

Anyway, with your linksys, you can't "dial-in"--given the US, "dialing-in" instead implies old analog internet service (certainly not fiber optic service)--and, a far more primitive type of modem--connected to relatively simple legacy "twisted-pair" conventional telephone cables.

The above should apply for a TPLink router, as well--thus, don't get rid of your linksys for that reason--it should work in the same manner. (The companies are just competitors--offering similar products.)

What you likely mean instead of "dialing in" is inputting the correct username and password, etc. You were here--your service (as an internet service provider--ISP) appears to function. Your router likely works well.

Instead, it likely has to do browsing to the correct site and inputting a correct username and password. (Perhaps, you must configure your account for movie streaming beforehand.)

I tried navigation to the .pk site--no function. Some info about the site says it's dead. (Perhaps I was blocked.) Try to search (google.com, bing.com, etc.) for the correct site(s) you need, instead. (Maybe the url (the web address) was changed.) Navigate your ISP's site for info, too--perhaps first.

Mar 24, 2014 | Linksys GIGABIT WLAN ROUTER WRT320N...

2 Answers

How to connect my tp link wireless router with my wi tribe modem?? my laptop pick up the wireless signal and can connect,,it says "connected" but when you open a page it says either...


if you were using Fariya before wi tribe or any other dialer to connect internet, you have to first remove that one.

To remove the dialer or connection you have to go to run, type ncpa.cpl there and then in new opened window remove the old connection (e.g Fariya)

Dec 04, 2010 | Linksys WRH54G Wireless Router

1 Answer

Computer says it is not connected (this is a second computer that is linked to primary computer with Linksys G24ghz router. It asks for a password I do not have.


If you forget your password, click on the reset button and re-config it, usually your WLAN won't work because you deleted all the config information, if you had this problem, connect it using LAN modem, and then write the router's IP usually it is 192.168.1.1 or 192.168.2.1 and then write the username: admin password: admin

Wish this was helpful.

Aug 13, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Hi i have linksys pap2 voip router and am unable to programme it .......can you help


goto ip address 192.168.5.1

or config manual with phone with #* to enter config bia analog

Feb 18, 2010 | Linksys PAP2T

1 Answer

Linksys Routers lose setup


I Had to replace a Linksys for a client because every time was a power outages the router was losing the setup. So try unpluging the power supply.

Jan 06, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I brought a Laptop (acer) I need to connect to my network but I can't remember my password. How can it get into the router to see what it is. I've called Linksys but they want to charge me 29.99


there a reset button on the back to reset config. so you must have all the router config backup on paper.

to reset router:
1st the router manual, needed for config.
2nd backup router config.(on paper)
3rd press the reset button more than 5 sec. until all lights were off (except on)
4rd reed manual the steps for 1st time config.
then config router again, and test internet connectivity and wireless security level (WPA2), change all router passw every 30days or less.

Dec 26, 2009 | Linksys Wireless-N WRT150N Router

1 Answer

Lost DHCP connection. I changed nothing on my config


Hi,

You may want to press and hold (using a pen or a paper clip) the reset button of the router for 30 seconds and then unplug the power of the router. Turn off the modem, wait for 10 seconds, turn on the modem, and then the router, and make sure that the modem is connected to the internet port of the router and PC to the ethernet port (1, 2, 3 or 4). See if the router will obtain an IP address from the modem. If not, download here http://www.linksysbycisco.com/US/en/support/WRT54G2/download the latest firmware for the router.

Ensure that you download the correct version for the router.

Jul 19, 2009 | Linksys Wireless-G WRT54GS Router...

1 Answer

When I am setting up my wireless laptop it asks for a PIN# that is suppose to be located on the router so it can config to laptop do you know what this pin #


Hi! I just had this same problem and it was driving me crazy but I finally found it!

If you can access the router configuration page: 192.168.1.1 (with your admin name and password) and look under the wireless tab... scroll down and it will say "if your client asks for the router's pin enter this number" and will have the pin listed for you.

Would have been great if they'd made it a bit easier but very happy I found it.

Hope that helps.

Xina

Aug 29, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys router wrt54g


To connect your computer to the router, all you should need to do is to connect the cables in one of the numbered ports on the router and then reboot your computer so that it pulls an IP address from the router.

Satelite Internet service vareis greatly from the normal setup required of cable or DSL providers, so perhaps you should contact your internet providers support technicians as those calls are free.

As for the gaming ports; in the menu of your router, you will find the port forwarding option available. Simply enter the ports you use to play those games with and you will be able to open them up for better game playing. Test it a few times to make sure you have the settings right, but it is normally fairly simple and understandable even if you haven't read the manual before.

Jul 01, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

How can I establish a bridge with WRTSL54GS Router?


To bridge yoyr router.. contact your dsl internet service provider (isp) and ask then to brigde your modem.. and get the exact user name and passwd.. and config your router for a pppoe mode and that will fix your problem..

Dec 05, 2007 | Linksys Wireless-G WRT54GS Router...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4367 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...