Question about Frigidaire Ovens

Open Question

Since last night my frigidaire DW has been showing me iCO on the display. I turned off my breaker for half an hour and it turned off. But has since come back. What should I do now??

Posted by on

Ad

5 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
appliancguy

Mark Truitt

  • 86 Answers

SOURCE: My Frigidaire FEFL79GSA cooking element is

I'm banking that infinite switch is bad (the knob) but there could be other issues. If it's just one burner doing it then I would assume the switch, but if not then I would get a technician.

Hope this helps, good luck...

Posted on Dec 16, 2009

Ad
ZJLimited

ZJ Limited

  • 17970 Answers

SOURCE: My frigidaire oven is displaying

The F1 code indicates a control failure. Try pressing a key to see if it displays on the screen. If not, the keypad may have shorted and requires replacement.

If the keypad is fine, there is perhaps a problem with the internal checksum; disconnect the power for 30 seconds and reconnect it. If the code remains, you must replace the electronic oven control (EOC).
- If the F1 code appears when the oven is running, it means that the oven senses an overheating condition. Use an external thermometer to check the temperature inside the oven.
- If it is accurate, it means that either the temperature sensor probe or the control relay has malfunctioned. Disconnect the power, and inspect the sensor probe, replacing it if necessary.
- If the oven is actually overheating, replace the EOC.
- If the oven is allowed to overheat, the resulting damage is possibly so extensive that the entire oven may require replacement.
Visit THIS LINK for additional details.

Hope helps.

Posted on Jul 18, 2011

oldTech2332

Gene Meier

  • 2341 Answers

SOURCE: what is F5 Frigidaire oven unit, it's beeping and

Hello,
The F5 ERROR code means that the self check that the control (also called clock)board runs to check itself has failed and the control has detected a problem within itself and the control must be repalced.

Gene

Posted on Aug 10, 2011

Testimonial: "thanks for the reply, you have been very helpfull. I will now start looking for a new control board."

mc1bean

Mike Cairns

  • 3053 Answers

SOURCE: Last night ran the self clean for three hours on

Hello, nf

I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and fartherback, It appeared that no one answered some of them, So, I thought Iwould take some of my personal time to see if I can help. Even though this sitemay not have your exact model or brand, this link will help you tons. Here is alink to about everything you want to know about your oven, from
repairto trouble shooting it. Even pictures and video's. Just scroll around and youwill see tons of information to almost any question you might have on yourOven. If you go to this link and click around, I am sure you will find out somuch about your oven, you will know more than the company that made it. Thegood thing about this link is, then you can make the decision of DIY or hiringa pro. Here Is the link for you to click on>>


http://home.howstuffworks.com/dishwasher.htm




Please if this helped you at all, if you can find the time to rate my help andsome kind words written would be appreciated for my free help , I wouldappreciate it. Here is also my direct link to my own pages of other areas of myexpertise for other problems you might have in Automotive,Appliance, andElectronics. Drop In anytime for my help. Thanks, Mike

http://home.howstuffworks.com/how-to-repair-an-oven.htm



Please if this helped you at all, if you can find the time to rate my help andsome kind words written would be appreciated for my free help , I wouldappreciate it.

Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help

Thanks, Mike


http://beta.fixya.com/users/mc1bean

Posted on Oct 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire plef398dca


Hello Bill Robbins - From what you are describing it sounds like a wiring failure or a communication break failure between the power board and UIB has occurred. Error code F5, typically indicates that the EOC will need replacing. A certified technician will need to test the wiring harness between the ESC, UIB and EOC.

Jan 21, 2013 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

Frigidaire oven door is still locked 7 hours after self-cleaning


Hello - Try resetting the unit by either unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and turn the range back on. This will clear most false error codes. If error code still displays on panel, I would suggest contacting a professional to move forward accurately. The unit could possibly have a faulty light switch, door latch or EOC.

Oct 21, 2012 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

What is F5 Frigidaire oven unit, it's beeping and


Hello,
The F5 ERROR code means that the self check that the control (also called clock)board runs to check itself has failed and the control has detected a problem within itself and the control must be repalced.

Gene

Aug 10, 2011 | Frigidaire Ovens

1 Answer

I have a Frigidaire Range model PLES389DCC, it's top cooking function well, but display panel PF show, the clock start from 12:00 (after off/on circuit breaker) and kicking. I have order the control panel...


The clock may be set for 12 or 24 hour time of day operation.
The clock has been preset at the factory for 12
hour operation. When the range is first plugged in or when
the power supply to the range has been interrupted, the
timer in the display will flash and PF (power failure) will
appear in the display.
To set the clock:
1. Press Clock . "CLO" will appear in the display.
2. Example for 1:30. Press the numbers 1 3 0 to
set the time of day to 1:30. "CLO" will disappear
after 4 seconds and the clock will start. Or you may
press Start. "CLO" will disappear and the clock will
start.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Nov 29, 2010 | Frigidaire Ovens

2 Answers

Frigidaire gallery stove, oven not working,


Morison,
The same thing happened to me about a week ago. I was preheating our electric oven, heard a very loud bang/pop. Checked and the oven had PF (power failure) I went downstairs and the breaker was tripped. Came back upstairs and to look at stove, the burners are working fine so I continued to preheat oven after a half an hour the oven was only slightly warm. Did you ever find out what was wrong?

May 04, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

My Frigidaire FEFL79GSA cooking element is intermittent. Last night it went to high although the control knob was on low and would not turn off when the knob was turned off. I had to turn the breaker off...


I'm banking that infinite switch is bad (the knob) but there could be other issues. If it's just one burner doing it then I would assume the switch, but if not then I would get a technician.

Hope this helps, good luck...

Dec 16, 2009 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

My oven display is beeping and blinking 'PBR' on the display. What does that mean?


I had this same problem last night.. I have been having problems with the oven shutting off on preheat.. That sort of stopped. Last night lost power to the house. When it returned the oven was beeping and flashing PBR. I turned off the breaker for a few mins. last night and it returned. It was bugging me so much that turned it off the whole night. Woke up this morning turned the breaker back on and it stopped. I don't think this is the total solution. I am thinking that eventually I am going to have to replace power board in this oven. Hope it works!

Sep 23, 2009 | Jenn-Air Ovens

1 Answer

Whirlpool Double Oven RBD305 Display doesn't show, oven wont work


Most definitely a bad control board and/or soldered components. (The part about cutting power to the oven was a dead giveaway)
There are low and high temperature solders, but usually solder melts at 370° F. If the oven is improperly insulated or ventilated you will have continued heat stress to the control board.

Mar 31, 2017 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Display doesn't work, but oven works


First turn the electricity off by locating the breaker to the oven and turn it off. Now wait for an hour or so and turn the breaker back on, if the display turned back on, you need a control board (other manufatures call it a clock, PCB or ECC but it's the main elctronic board with the diaplay built in). If it didn't come back on, turn the power off again and make sure all the wire harness's going to the board are connected good. Turn the power back on and it the display still doesn;t come back on you need to replace the main electronic control board. By the way double check the model number and brand because it might be wrong. Please post back.

Oct 04, 2006 | Whirlpool RBD275PD Electric Double Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...