Question about Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

1 Answer

Can i disable the bottom drawer on a Fisher and Paykel dishwasher and only use the top drawer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 102 Answers

You cannot disable, as in turn off, permanently, but you can turn off with the power (left most) button and then lock the control (right most button) by pressing and holding it for approx. 3-5 seconds. The lock symbol will illuminate. Now the lower drawer cannot be operated - unless the lock is released. You cannot disconnect the lower drawer as this will cause a U4 or similar error and both drawers will shut off.

can i disable the bottom drawer on  a Fisher and P - 26299771-oqohpjkn4w5xpl25m5ra3xvd-2-0.jpg

Posted on Oct 31, 2016

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Master_Tech

Gary Davd

  • 770 Answers

SOURCE: fisher paykel

Check your email

Posted on Jul 09, 2008

Anonymous

  • 15 Answers

SOURCE: The top drawer of my Fisher Paykel two drawer dishwasher will not close all the way. Something appears to be stopping it. How do I fix it?

To find out what might be blocking it, you can remove the drawer. There are two tabs one on each side of the drawer near the bottom front. Push those in and pull the drawer out. You can lift the drawer up and push the slides in to get them out of the way. Then you should be able to see into the cabinet and what if anything is stuck behind the drawer

Posted on Apr 30, 2009

dustymirror

  • 205 Answers

SOURCE: Fisher & Paykel DD601 top drawer won't start.

Most likely the micro-switch that tells the controller that the drawer is closed is broken. Its a tiny little black switch at the back of the left drawer slide, it had a metal actuator that is prone to breaking.

Posted on Jul 21, 2009

Sam

  • 3247 Answers

SOURCE: my fisher paykel DD S03SS dishwasher leaks from the top, & drain

The drawers should not leak unless there is a problem with the vacuum seal. Try cleaning the edges of the doors and operate. You should feel the vacuum is holding the doors. The seals could be faulty or vacuum system may be faulty.

About not draining completely - a possibility is the common drain hose after the U adapter being clogged. Remove the clamp and pass a flexible wire coat hanger towards the main drain pipe. If both drawers are not draining then it is unlikely the drain hose between the U clamp and the dishwasher is clogged. Also make sure the height of inlet water pipe and drain outlet is as specified in the installation manual

Posted on Nov 10, 2009

Linh Thanh

  • 784 Answers

SOURCE: I have a Fisher Paykel dishwasher with water in top drawer

You need a Air gap kit designed by Fisher and Paykel to address this problem. It is pricey but it is worthy. I used this and very happy with it since no back flow problem from one while other running. Here is a link to order it.http://www.fisherpaykelparts.net/product/WT50/WT50-Dual-Air-Gap-Kit/

Posted on Dec 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher & Paykel dishwasher top drawer is filling up with water when bottom drawer is ran.


It is the drain water from bottom drawer that is finding its way to the top drawer. This could be due to incorrect drain hose height. Check in installation manual. Alternatively you will have to buy an air gap kit and connect the two drain hoses separately to the kitchen sink.

http://www.genuineapplianceparts.net/ecart/item.php?item_id=250&category_id=58

Mar 22, 2014 | Fisher and Paykel Dishwashers

1 Answer

Fisher paykel cross draining


As the drawers share a common outlet to the kitchen sink drain, it is the drain water from bottom drawer going to top drawer. Can happen if the drain hoses are not following the correct specifications for installation. An air gap kit is available to solve the problems.

Refer
http://www.genuineapplianceparts.net/product/WT50/WT50-Dual-Air-Gap-Kit/?preadd=action&key=WT50

Mar 22, 2014 | Fisher and Paykel Dishwashers

1 Answer

F1 error on Fisher and Paykel Dish Drawer


Sorry did not see your problem report earlier. If you have checked the sensor under the bottom drawer and it is dry, then F1 is caused by top drawer power filter fault. This means the bottom drawer controller is giving the F1 error but the top drawer controller has no power. Can you confirm this.

Apr 08, 2013 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

I have a Fisher Paykel dishwasher with water in top drawer


You need a Air gap kit designed by Fisher and Paykel to address this problem. It is pricey but it is worthy. I used this and very happy with it since no back flow problem from one while other running. Here is a link to order it.http://www.fisherpaykelparts.net/product/WT50/WT50-Dual-Air-Gap-Kit/

Dec 12, 2009 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

The top drawer of my Fisher Paykel two drawer dishwasher will not close all the way. Something appears to be stopping it. How do I fix it?


To find out what might be blocking it, you can remove the drawer. There are two tabs one on each side of the drawer near the bottom front. Push those in and pull the drawer out. You can lift the drawer up and push the slides in to get them out of the way. Then you should be able to see into the cabinet and what if anything is stuck behind the drawer

Apr 22, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher & paykel 2 drawer unit


yes there is. It is just inside the white hoses that drain the system. 1 per drawer. They cost about $0.50 but are a real pain to get to. This flap will go bad in about 3-5 years and maybe sooner depending on the temp of the water used.

If the bottom flap goes bad, using the top drawer will drain into the bottom drawer.

Oct 12, 2008 | Fisher and Paykel 24 in. DD603H W Built-in...

1 Answer

Floods top drawer when washing bottom


The machine is not installed correctly, as it probably has a single air gap and the hoses for the two drawers are sharing that single air gap. These are basically two seperate dishwashers. There is a fix from fisher paykel parts:
http://www.fisherpaykelparts.net/index.php?categoryid=113&productid=7

Aug 12, 2007 | Fisher DD603B / DD603W / DD603H Dishwasher

Not finding what you are looking for?
Fisher and Paykel 24 in. DD603H W Built-in Dishwasher Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dishwashers Experts

Mark Davis

Level 1 Expert

18 Answers

Bruce Denton

Level 2 Expert

273 Answers

Paul Bade

Level 3 Expert

1662 Answers

Are you a Fisher and Paykel Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...