Question about Lenovo ThinkPad Computers & Internet

1 Answer

Strange symbol (square with a line thru it plus 2 smaller shapes at bottom of shape) How do you remove this? and what does it mean?

Posted by on

  • Marvin
    Marvin Oct 07, 2016

    Hi Karin Corteen, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Looks like your caps lock is on...

Posted on Feb 16, 2017

Testimonial: "Thanks forthe suggestion. However, it is not the cap lock. Symbol still shows up in the middle of my screen."

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

John Schreiber

  • 83 Answers

SOURCE: warning sign

Antilock or vehicle stability issue. post with year and model for more information.

Posted on Mar 25, 2009

Anonymous

  • 5 Answers

SOURCE: Record from tape deck to computer via USB and Audacity software

Im not sure what DIN sockets you're trying to describe here, but quite often, you can record from a tape player to a pc by connecting an rca cable to an adaptor; rca to 1/8"(headphone pin) and then plugging that headphone pin in to the microphone input on your computer.

Posted on Jun 22, 2009

Anonymous

  • 226 Answers

SOURCE: my screen is only working

see if the screen works in bios completely . if not change the hardware . if it works do a recovery or try updating the drivers.

Posted on Oct 19, 2009

joelwilcox

Friendly PC Repair

  • 1274 Answers

SOURCE: monitor for a dell inspiron laptop has multi

lcd sounds like it's dying or possibly cracked somewhere, i recommend replacing it, it's not that difficult

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Posted on Oct 30, 2009

Anonymous

  • 11 Answers

SOURCE: I have a 1996 Audi quattro, a warning symbol came

it is the induction side of things could be air filter or dirty sensor

Posted on Mar 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Newair Icemaker is making ice large at top and decreases down to little shape at bottom? What is the problem, please?


Ice on bottom is older ice. When icemaker goes thru defrost cycle, ice melts and gets smaller. New ice that drops on top is newer and bigger. Your only problem is not using enough ice.

May 03, 2018 | NewAir Refrigerators

3 Answers

Why is that manhole covers are round?


Hi! I'm sure there are a few more reasons why manhole covers are round, but here are some that I can think of: The round shape means that they can't fall into the manhole (like a square could). A round shape also means that it has a smaller surface area, so less material is needed to make them, making them cheaper to produce. Round manhole covers are also easier to move since they can be rolled on the ground.

Jan 16, 2014 | Hand Tools

1 Answer

Where is capacitor in a 28000 but window air conditioner


The outdoor capacitor is mounted usually at the top under the cover. The indoor capacitor is usually inside the electric control box on the right hand side. The indoor capacitor is usually a small square "box" shaped type with 2 or 3 wires attached for the indoor fan motor. The outdoor capacitor is usually a large round cylindrical shape for the compressor and a smaller box shaped capacitor for the fan motor.

Aug 13, 2013 | Kenmore Heating & Cooling

1 Answer

What kind of sunglass frame should I choose for my square face?


If you have an equally strong forehead and jaw line that match the sides of your face you have a square face.
The very best frame shape for you is an oval or round shape that will help soften and minimize your jaw line. Look for larger oval or round frames if you have a larger face, and smaller frames if your face is smaller.
Some great frames for your face type include the Dragon Spree, Coach Lindsay, Julbo Colorado and Drus, and the Ralph Lauren 876/S. You should be able to find just the right frame to fit your face and your budget!

Nov 07, 2010 | Clothing Accessories

2 Answers

My dc7100 has a compact power supply with proprietary 24 pin plug. Pretty sure power supply is non-functional (shorted green to black and fan didn't come on). Is it possible to rewire a conventional ATX...


I just spotted this, hence the late solution. Perhaps this will help someone in the future.

Yes it is possible.

Observe the color code of the insulation of the wires.

1) Orange wires are 3.3 Volts

2) Red wires are 5 Volts

3) Yellow wires are 12 Volts

4) The Green wire is the Soft Power On wire

5) All Black wires are Ground wires. Doesn't matter which Black wire it is, it's a Ground wire.
(It isn't a Common wire. This is DC electricity, not AC)

These are your main voltages, and wires to be concerned with.

Fortunately all HP, (Or any proprietary computer manufacturer in that time period), did, was to change where the wires are placed in the 20, or 24-pin ATX main power cable connector.

They just moved the wires in the socket holes, didn't change the color code.

Solution is,
1) To remove the wires in the ATX power supply, main power cable connector
2) To remove the wires in the proprietary computer's ATX main power cable connector.

(NOTE*
BE SURE to make a concise, clear, drawing FIRST, of where the colors of the wires went in the proprietary connector, BEFORE you remove them!)

3) To reinstall the wires into the proprietary connector.
(Again. Following the color code of the wires you removed)

Removing the wires out of the 20, or 24-pin ATX main power cable connector:

Observe these photos, of a 20-pin ATX main power cable's connector. This procedure can be applied to a 24-pin ATX main power cable connector also. (Or a 20 + 4-pin ATX main power cable connector)

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain20

(Also gives you information about the color code of the wires)

The middle photo shows you a view of the Front of the connector.
The photo to the right shows you the Back of the connector.

Where the wires go down into the connector is a Socket Hole.
At the end of each wire is a metal pin connector. A Male pin connector.

This metal pin connector is shaped like a tube on the end, and comes up to a square shape as you go up.
The square shape fits the square socket hole.

On one side of the square shape is a Tang. It's part of the square metal shape, and sticks out away from the square shape.
Resembles a barb on a fish hook.

In this crude illustration, let a small L represent the side of the square shape, and this forward slash - / represent the tang.

l/

This is an illustration from a manufacturer that supplies this type of metal Male pin connector,

http://www.molex.com/molex/products/datasheet.jsp?part=active/0002092166_CRIMP_TERMINALS.xml&channel=Products&Lang=en-US

A needle with the proper thickness so it won't bend, is inserted into the Front side of the socket hole, and is used to depress the Tang.

If you look down into the back of the connector, and into an individual socket hole with a bright light, and a magnifying glass, you will observe that the square socket hole has a small notch in one side.
This is where the tang slides down into.

It isn't easy to see from the front side.

The tang is depressed using the needle from the FRONT of the ATX main power cable connector, and the wire is removed from the Back side of the connector.

The metal pin connector's tube shape only goes up so far, then it turns into a square shape.

The socket hole in the connector is shaped to match. Tube shaped hole at the front of the connector, square shape coming on up to the back of the connector.

The square shape's corners, of the metal pin connector, keep it from coming out of the Front of the ATX main power cable connector.

The tang keeps the metal pin connector from coming out of the Back.

More information about the color code of the wires in an ATX main power cable connector, (Scroll towards the bottom of the page)

http://en.wikipedia.org/wiki/Computer_power_supply



Oct 16, 2009 | HP Compaq dc7100 PC Desktop

1 Answer

Maytag Plus Side by Side with the z shaped door...


it is a quick connect. Squeeze the little white ring into the coupling and remove the hose at the same time. To reconnect, cut half an inch of line of squarely and just reinsert it into coupling.

Jun 22, 2009 | Maytag MSD2756G Side by Side Refrigerator

3 Answers

Red box shaped warning light-2002 saturn sl2


If the symbol looks like this:
10fb1f7.gif It means your coolant is low.

Jan 15, 2009 | 2002 Saturn Sl

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Ekse

Level 3 Expert

13434 Answers

Toby Lee
Toby Lee

Level 3 Expert

409 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...