Question about GE Dishwashers

Open Question

How do i dtermine what is causing my ge portable dishwasher not to drain. I don't want to order parts that i don't need

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: pump not draining - Haier portable dishwasher

purchase new pump at www.partsquick.com/haier
about 33 shiped must be able to replace if they sell the pump i have the same problem looking for a diagram to replace pump

Posted on Jan 05, 2009

Ad

Joe Hogan

  • 10865 Answers

SOURCE: Kenmore portable dishwasher not draining

Your dishwasher pump ejects the water. The pump is usually mounted directly to the motor, then attached to the bottom of the dishwasher. You can reach the pump from inside the dishwasher, but first you need to remove the lower rack, the spray arm, and the spray arm support.

Look for an impeller--a round plastic fan blade-type of device that spins around. This is the wash impeller, which forces the water through the spray arm. Beneath the wash impeller is the drain impeller, which is similar in size and shape to the wash impeller. The drain impeller pushes the water toward the drain port. These components make up the pump. If any of the pump components are defective, you need to replace them.

Drain valve and/or solenoid Many dishwashers use a drain valve with an electric solenoid. When electricity flows to the solenoid, the valve opens and diverts the water to the drain. Sometimes the solenoid, or the diverting lever, sticks and prevents the dishwasher from draining or filling properly. Try to free up the solenoid to lubricate the lever. Otherwise, you may have to replace the solenoid or pump assembly. With these systems, the motor always rotates in one direction. When it's energized, the drain valve diverts the water.

Other dishwashers simply reverse the direction of the motor to drain the dishwasher. These units don't have a drain valve. Instead, there's a drain hose connected directly to the pump housing.

Belt One brand of dishwasher uses a belt to drive the pump. If this belt is broken or has fallen off, replace it.

Motor If the motor isn't turning or working, the unit won't drain. First check to be sure you have power to the dishwasher. If not, see the section "It doesn't work at all." If the motor hums but doesn't turn, it may need to be replaced.

Some dishwashers are susceptible to getting stuck if you don't run them regularly. If you haven't run the dishwasher for more than a week, you may need to manually spin the motor to free it up. If the motor is defective, you need to replace it. Dishwasher motors can't be serviced.

Posted on May 28, 2009

Anonymous

  • 35 Answers

SOURCE: Maytag dishwasher model MDB8750AWS leaks

Check seals and plumbing connections, may need tighten or replacing.

Posted on Jan 06, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: Dishwasher runs through full cycle but will not drain

Hi,
Here is a tip that I wrote that will help you with your problem...

Dishwasher2_bing.gif Problems - Water will not drain out
https://www.fixya.com/support/r4078724-dishwasher_problems_water_will_not_drain

heatman101

Posted on May 18, 2010

SOURCE: Portable Dishwasher wont drain GE Model

There's a few things you can look into that won't cost you any money.

First, manually remove as much water as possible and then check the sump area for paper or any other large object clogging the drain. A cup or so of water in the sump area of your dishwasher is normal and it is there to prevent the seals from drying out. The dishwasher will pump this old water out before beginning to wash.

Make sure the door is properly latched as the pump will not drain if the door is not latched properly.

Check the belt, drain line, air gap, drain valve and solenoid assembly, the motor, and the pump. If your dishwasher uses a belt to drive the pump, and it has broken or come off the pulley, replace it.



If you have recently installed a garbage disposer in your home, make sure that the drain plug on the disposer has been removed. It's just a little plastic piece that blocks the hole where you hook the dishwasher drain hose. If your dishwasher drains through the garbage disposer, you need to run the garbage disposer before you run the dishwasher to make sure that the drain is clear.

There is a drain hose between the drain valve or pump and the garbage disposal or drain line. If an obstruction has blocked this, then your dishwasher won't drain. The drain hose is connected by clamps to the drain valve and the disposer or drain pipe. Remove it and visually inspect it for a clog or a kink. Try to remove any debris. If it is in good condition, just put it back on, and if not, purchase a new one to install.

If you don't have an air gap in the drain line, at least use a high drain loop. Making a large loop about 18" off the ground with the drain line can prevent any back flow into the dishwasher from the sink.

If you have one, the air gap will be located on top of the sink. The air gap is there to prevent any siphoning of standing water from the sink. When your dishwasher drains, the air gap diaphragm will form a seal and allow the water to drain properly. If the diaphragm in the air gap is faulty, it’s possible that water can leak onto the cabinet and into the sink area. When this happens, then the air gap must be replaced.

Like the inlet valve, there is also a drain valve on most models. When no power goes to the drain valve it remains closed and prevents water from leaving the machine. When the valve receives power during the drain cycle, the solenoid opens and allows the water to leave the machine. If your drain hose is attached directly to the pump, you don't have a drain valve. The motor simply reverses and the pump sends the water in the opposite direction, which is out of the machine.

If the motor doesn’t turn or work properly, the dishwasher may not drain. Make sure you have power to the unit. If you notice that the motor hums but won't turn, it could be seized, and you probably need to replace it.

if you need to buy any parts, I have had alot of help from http://www.apwagner.com
Small objects can sometimes get stuck in the pump. When this occurs, you’ll need to open the pump and remove any debris buildup. The dishwasher pump is usually mounted directly to the motor and runs off the motor as well. The pump is also attached to the bottom of your dishwasher and pushes the water from the dishwasher.There's a few things you can look into that won't cost you any money.

First, manually remove as much water as possible and then check the sump area for paper or any other large object clogging the drain. A cup or so of water in the sump area of your dishwasher is normal and it is there to prevent the seals from drying out. The dishwasher will pump this old water out before beginning to wash.

Make sure the door is properly latched as the pump will not drain if the door is not latched properly.

Check the belt, drain line, air gap, drain valve and solenoid assembly, the motor, and the pump. If your dishwasher uses a belt to drive the pump, and it has broken or come off the pulley, replace it.



If you have recently installed a garbage disposer in your home, make sure that the drain plug on the disposer has been removed. It's just a little plastic piece that blocks the hole where you hook the dishwasher drain hose. If your dishwasher drains through the garbage disposer, you need to run the garbage disposer before you run the dishwasher to make sure that the drain is clear.

There is a drain hose between the drain valve or pump and the garbage disposal or drain line. If an obstruction has blocked this, then your dishwasher won't drain. The drain hose is connected by clamps to the drain valve and the disposer or drain pipe. Remove it and visually inspect it for a clog or a kink. Try to remove any debris. If it is in good condition, just put it back on, and if not, purchase a new one to install.

If you don't have an air gap in the drain line, at least use a high drain loop. Making a large loop about 18" off the ground with the drain line can prevent any back flow into the dishwasher from the sink.

If you have one, the air gap will be located on top of the sink. The air gap is there to prevent any siphoning of standing water from the sink. When your dishwasher drains, the air gap diaphragm will form a seal and allow the water to drain properly. If the diaphragm in the air gap is faulty, it’s possible that water can leak onto the cabinet and into the sink area. When this happens, then the air gap must be replaced.

Like the inlet valve, there is also a drain valve on most models. When no power goes to the drain valve it remains closed and prevents water from leaving the machine. When the valve receives power during the drain cycle, the solenoid opens and allows the water to leave the machine. If your drain hose is attached directly to the pump, you don't have a drain valve. The motor simply reverses and the pump sends the water in the opposite direction, which is out of the machine.

If the motor doesn’t turn or work properly, the dishwasher may not drain. Make sure you have power to the unit. If you notice that the motor hums but won't turn, it could be seized, and you probably need to replace it.

if you need to buy any parts, I have had alot of help from http://www.apwagner.com
Small objects can sometimes get stuck in the pump. When this occurs, you’ll need to open the pump and remove any debris buildup. The dishwasher pump is usually mounted directly to the motor and runs off the motor as well. The pump is also attached to the bottom of your dishwasher and pushes the water from the dishwasher.

Posted on Sep 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to remove kick panel on portable ge dishwasher


Unfortunately, in any way, when we ordered a kitchen from the guys https://nyfurnitureoutlets.com/ then they also wanted something dishwasher to be portable, but they all unanimously said that they quickly break, so get a better new built-in.

Aug 19, 2018 | GE Dishwashers

1 Answer

GE dishwasher GSD2230 won't drain completely after it completes entire cycle.


Hi



Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dishwasher and remove the drain hose and check for any visible clogging. If still not visible then the drain filter or drain pump is clogged and you'll need to clean the drain filter and drain pump. Also, check for any food pieces stuck near the pump impeller.

Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat.


Hope this helps... Please post back for any further assistance.


Daniel

May 18, 2011 | GE 24 in. GSD2230Z Built-in Dishwasher

1 Answer

My portable GE dishwasher is clogged and wont drain


Hi
Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dishwasher and remove the drain hose and check for any visible clogging. If still not visible then the drain filter or drain pump is clogged and you'll need to clean the drain filter and drain pump. Also, check for any food pieces stuck near the pump impeller.
Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. Hope this helps... Please post back for any further assistance.

Feb 13, 2011 | GE Profile 24 in. Built-In Dishwasher...

1 Answer

Water wont drain out of bottom of dishwasher


this could be caused by a few things - one would be a blocked drain hose between the dishwasher and the garbage disposal ( if you have one ) -- if not then the hose between the dishwasher and the drain pipe under the sink. the next thing to check is to see if the screen ( drain ) at the bottom of the dishwasher is dirty and plugged up,, if it is, then clean out and run machine. the next thing to look at is the pump itself, you can use a volt meter to check for voltage at the pump when the machine is in the drain cycle,, if you do have power to the pump at the drain cycle then the pump is bad and needs to be replaced. but if you do not have power at the pump then the problem could be the relay or the control switch itself, remove and replace with new. any parts that you need can be found or ordered at your local appliance repair shop.
if you have any other questions about this problem ,, please feel free to write and ask -- I will do my best to walk you through it.

c...

Jan 31, 2011 | GE Nautilus 24" Built-in Dishwasher

3 Answers

I have a ge profile dishwasher that does not drain well and dosent do the best job cleaning .could it be the drain


Hi,


Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems -
Water will not drain out



Dishwasher Spray Arms not Spinning

How to Buy
Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The
Heating Element not Working

Dishwasher Maintenance



Dishwasher Residue and Film on Dishes



heatman101

Dec 28, 2010 | GE Profile PDW8400J Built-in Dishwasher

1 Answer

My portable dishwasher wont drain all the way. it has water that comes out but not all


Hi,
Here is a tip that I wrote that will help you with your dishwasher not draining problem...

Dishwasher Problems - Water will not drain out
https://www.fixya.com/support/r4078724-dishwasher_problems_water_will_not_drain

heatman101

Aug 23, 2010 | GE 24-7/8" Convertible Portable Dishwasher...

1 Answer

GE Triton 24


Hi

Please note that dishwashers don’t drain out the complete water such that heating element doesn’t overheat.
Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dishwasher and remove the drain hose and check for any visible clogging. If still not visible then the drain filter or drain pump is clogged and you’ll need to clean the drain filter and drain pump.


Please post back for any further assistance.

Daniel

Jul 23, 2010 | GE Dishwashers

1 Answer

Dishwasher runs through full cycle but will not drain


Hi,
Here is a tip that I wrote that will help you with your problem...

Dishwasher2_bing.gif Problems - Water will not drain out
https://www.fixya.com/support/r4078724-dishwasher_problems_water_will_not_drain

heatman101

Apr 16, 2010 | GE 25 in. GSC3200GWW Free-standing...

2 Answers

Portable dishwasher G E


remove the drain pipe form the waste outlet and lay it down lower than the bottom of the dishwasher so it drains out with gravity simple really

Sep 26, 2007 | Dishwashers

2 Answers

Portable dishwasher


The first thing you might want to do is check the water pressure in the house. Ideal water pressure should be from 55psi to 75psi max. I have seen homes that had pressure around 125 psi which will cause pressure leaks in water heaters, softners, washer valves, r/o systems. Check to see that all, if any inlet screens are clear and free from any grit and sand. It's possible that your inlet water valve (wd10m0010) has become restricted. Other than that, the complete uncoupler hose assy. part number is wd24m0030. These parts are for the dishwasher model ending in gsc3400j00bb. They are the same for model number ending in 00ww. Good luck.

May 07, 2006 | GE 25 in. Nautilus GSC3400J Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike

Level 3 Expert

4363 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...