Question about GE Home Security
You need to get the installer code, then enter programming mode to delete the sensor.
Posted on Mar 28, 2018
Most likely it is remembering a alarm at that station. If you enter your alarm code following the "status", it will clear it. (That's how mine works)
Posted on Jan 19, 2009
The system is working as designed. If you arm both doors/windows and motions, but you DON'T exit the premises during the exit delay, the system will "downgrade" its arming to doors/windows only. The assumption is that you haven't actually left the premises and are at risk of creating fale alarms. This behavior can be disabled in System Configuration (though it may require the dealer access code to do it).
Try opening and closing a sensored external door (even if you don't go outside) during the delay after arming doors+motion and see if the motions don't stay active.
Posted on Jul 29, 2009
If your system is monitored call the central station first and tell them you are working on it. Then push down on release tab in top center to fold down the front face. Nest step is to use a small flat blade screw driver to push in and release the tab again in the top center and the unit will fold down towards you, hold on to it and you will see the battery compartment. Follow the red and black wires to the battery. Some units have a plastic lid over the battery that requires you to remove to small phillips screws to remove battery.
Posted on Feb 22, 2010
This is the install manual for your system
Use it to locate the battery (in the main unit) and the power supply wire - disconnect both.
If you later will want to reuse it you should read the user manual on how to program it
Posted on Sep 07, 2011
Tips for a great answer:
Mar 02, 2017 | GE Home Security
Jan 11, 2016 | GE Security Simon Xt Wireless Control...
Jan 15, 2013 | GE Simon XT Wireless Home Security System
Sep 22, 2011 | GE Computers & Internet
Jan 05, 2011 | GE Security Simon Xt Wireless Control...
Aug 07, 2010 | GE Security Simon 3 Wireless Home Security...
Mar 08, 2009 | GE Home Security
Jan 29, 2009 | GE Security Simon 3 Wireless Home Security...
Dec 30, 2008 | GE Security Simon 3 Wireless Home Security...
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: