Question about Canon PowerShot ELPH 150 IS Digital Camera Silver

Open Question

Is there a clock display on the elph 150 is? if so how do you turn it on to look at the current time?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find how to change the time for the alarm system for a Alphaline 150i digital radio alarm clock


PDF]Instruction Booklet - Sound Therapy and Relaxation Clock ...

www.conair.com/instruction.../07ps111_su7_ib.pdf

Conair CorporationThe LCD display will show the current time of ALARM 1, reset time. ... The Conair Sound Therapy & Relaxation Clock Radio System can be used with a cord ... 1) 10 high quality digital recordings .... 150 Milford Road, East Windsor, NJ 08520.

Muse - Alarm clock radio

www.muse-europe.com/en/products/alarm-clock-radio
Catalogue Products, Cat?gorie Alarm clock radio. ... M-125 CRB. Clock radio CD player with MP3 ... M-150 CR. Clock radio ... Automatic time-set clock radio PLL ...

[PDF]FM/AM Clock Radio - Sony


Jan 10, 2016 | Watches

1 Answer

How to change clock


From the owners manual for the 2012 Impala Section 1-14.
(I have included a link from Chevrolet's website to the full manual)

Setting the Clock

To set the time for the Radio with

CD (Base):

1. Press the H button until the hour

begins flashing on the display.

Press H a second time and the

minutes begin flashing on the

display.

2. To increase or decrease the

time, do one of the following

while the hours or minutes are

flashing:

. Turn the f knob.

. Press ¨ SEEK or © SEEK.

. Press\FWD orsREV.

3. Press the H button again until

the clock display stops flashing

to set the currently displayed

time, or wait five seconds until

the flashing stops and the

current time displayed is
automatically set.

http://www.chevrolet.com/content/dam/Chevrolet/northamerica/usa/nscwebsite/en/Home/Ownership/Manuals%20and%20Videos/02_pdf/2k12impala.pdf

Mar 13, 2015 | 2012 Chevrolet Impala

1 Answer

How to set the clock on a 2008 chevy cobalt


Setting the Clock (H-clock symbol, O-pwr symbol, f-music note symbol)
Without Date Display
AM/FM Base Radio with a Single CD Player
This type of radio has a
H
button for setting the time.
You can set the time by following these steps:
1. Turn the ignition key to ACC/ACCESSORY or
ON/RUN. Press the
O
knob, located in the
center of the radio, to turn the radio on.
2. Press the
H
button until the hour begins flashing
on the display. Press the button a second time and
the minute begins flashing on the display.
3. While either the hour or the minute numbers are
flashing, turn the
f
knob, located on the upper
right side of the radio, clockwise or counterclockwise
to increase or decrease the time.
4. Press the
H
button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour to
24 hour, press the
H
button and then the pushbutton
located under the forward arrow label. Once the
time 12H and 24H are displayed, press the pushbutton
located under the desired option to select the default.
Press the
H
button again to apply the selected default,
or let the screen time out

Dec 27, 2014 | 2008 Chevrolet Cobalt

1 Answer

Date and time arror


When you turn your machine on for the first time, the display

prompts you to enter the current date and time. After entering,

it will not appear anymore.

NOTE: When turning on the machine after turning it off for a

long time, you need to reset date and time.

1 Press Menu until "Machine Setup" appears on the top line

of the display.

2 Press the scroll button ( or ) to display "Date & Time"

on the bottom line and press Enter.

3 Enter the correct time and date using the number keypad.

Month = 01 ~ 12

Day = 01 ~ 31

Year = requires four digits

Hour = 01 ~ 12 (12-hour mode)

00 ~ 23 (24-hour mode)

Minute = 00 ~ 59

NOTE: The date format may differ from country to country.

You can also use the scroll button ( or ) to move the

cursor under the digit you want to correct and enter a new

number.

4 To select "AM" or "PM" for 12-hour format, press the or

button or any number button.

When the cursor is not under the AM or PM indicator,

pressing the or button immediately moves the

cursor to the indicator.

You can change the clock mode to 24-hour format (e.g.

01:00 PM as 13:00). For details, see "Changing the Clock

Mode" on page 2.10.

5 Press Enter when the time and date on the display is

correct.

6 To return to Standby mode, press Stop/Clear.

Changing the Clock Mode

You can set your machine to display the current time using

either a 12-hour or 24-hour format.

1 Press Menu until "Machine Setup" appears on the top line

of the display.

2 Press the scroll button ( or ) until you see "Clock Mode"

on the bottom line and press Enter.

The clock mode currently set for the machine displays.

3 Press the scroll button ( or ) to select the other mode

and then press Enter to save the selection.
4 To return to Standby mode, press Stop/Clear.

May 14, 2014 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Find manual for woods 59028 programmable timer switch



1) Set current time:
Press reset button to clear all programs , display should flash 12:00 AM Monday
Press and hold CLOCK button.
Press Hour, minute and day buttons until current hour minute and day display.
Release Clock button.
Next step is to program the timer
Example shows how to turn on at 5PM each day and turn off at 11 PM each day.
2) Programming review: Each program requires ON time to be set, and then OFF time to be set For example you set Program1 ON 5:00PM for ALL days. And then you set Program1 OFF 11PM for ALL days. Minimum on-off set time is 1 minute.
3) Programming steps: Press PROG button until Timer 1 ON appears on display Use Hour button to set 5 PM Use MIN button to set :00 Default selects ALL days (If you want other days, press DAY button until display shows correct block of days) Press PROG button again to save Program1 ON 4) Now for Program1 OFF 5) To set Program1 Off Press PROG button until Timer 1 OFF shows in display. Use Hour button to set 11 PM Use MIN button to set :00 Default selects ALL days (If you want other days, press DAY button until display shows correct block of days) Press PROG button again to save Program1 OFF 6) Program 1ON and Program1 OFF have been set ... so press the CLOCK button to return to current time. If you want to set another program, press PROG button until Timer 2 ON displays 7) After setting programs, press Clock button so current time shows. 8) The manual shows one more thing ... if you program the timer during the hours 5-11pm, and the timer should be ON during those hours, you have to 'tell' the timer to turn ON by pressing the manual override ... after that the timer will operate normally.

Nov 21, 2011 | Woods 59028 Programmable Timer Switch...

1 Answer

I am trying to st the timer to turn on at 5PM and turn off at 11PM.


You posted under Intermatic HB88RC timer
If you have different timer, add a comment

HB88RC timer manual:
http://waterheatertimer.org/pdf/hb88rc.pdf

HB88RC programming Instructions:
Install AA battery in timer so display will show, and you can program

Set clock:
Hold down clock button.
Press day button until current day displays.
Press Hour button until current hour displays.
Press min button until current minute shows.
Release clock button

Program timer:
Press PROG button until 1 ON displays
This is Event1 ON
Press Day button until selected day or days displays for event1 ON
If you want all week long, then press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 5pm shows >> this is event1 ON
Press Min button until :00 displays for event1 ON

Press PROG button until 1 OFF displays
This is Event1 ON
Press Day button until selected day or days displays for event1 OFF
Match days with ON time: so press day button until all days show: MO TU WE TH FR SA SU
Press Hour button until 7pm displays >> this is event1 OFF
Press Min button until :00 displays for event1 OFF

When programming is finished, press clock button to display current time

When programming is finished, press MODE button to select MODE > you want AUTO for timer programs to operate
Press MODE button once and this is manual override, and lights come on.
Press MODE button again and RDM displays, this is for random timer operation
Press MODE button 3rd time, and timer is set to AUTO
After setting MODE to auto, press clock button to display current time.

Plug timer into receptacle.
Plug lights into timer.

Dec 18, 2010 | Intermatic HB88RC - 7-Day Programmable...

1 Answer

How to set time on jvc kd-r210


Setting the clock
  • Press and hold SEL (select) for more than 2 seconds. "DEMO", "CLOCK H", "CLOCK M", "DIMMER", or "AMP GAIN" appears on the display.
  • Set the hour.
  • 1. Select "CLOCK H" (hour) if not shown on the display.
  • 2. Adjust the hour.Using the Control Knob.rwalker540_3.jpg
  • Set the minute.
  • 1. Select "CLOCK M" (minute).
  • 2. Adjust the minute. Using the Control Knob
  • rwalker540_4.jpg
  • Finish the setting. To check the current clock time or change the display mode.
  • Press DISP (display) repeatedly. Each time you press the button, the display changes as follows:
  • • During tuner operation:
  • • During CD operation:
  • • During power off:
  • The power turns on and the clock time is shown for 5 seconds, then the power turns off.

Nov 11, 2010 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

How do I set the current time on the Woods Digital Timer Model#59203?


78a8604.jpgWoods 59301
Manual for 59301
http://waterheatertimer.org/pdf/Woods-59203.pdf

Plug timer in wall for 1-2 hours so rechargeable battery charges
If display does not show after 1-2 hours, the battery is dead and timer is no good

After 1-2 hours, you can remove timer from wall to program

Press reset (R) with paper clip to clear memory

Select format: Press and hold Clock button until 12 hour or 24 hour shows on display, then release
Press hour button to change display to 12H
press Clock button and display returns to normal
AM shows in upper left corner

Set current time:
Press and HOLD clock button
While holding clock button, press hour button and minute button until display shows current time
Release clock button
Press and HOLD days button until current day shows in display
Release days button

Further instructions to set ON-OFF times are in manual (click link shown above for manual)
If you have problems, re-post additional question.

Oct 17, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

How do you set the clock on the delonghi DO400 toaster oven


  1. Press for 5 seconds the TEMP./SELECT/CLOCK but- ton (7) (the hours flash on the display).
  2. Press the TIME/TOAST COLOR buttons (8) to the desired time (hours). The time set will begin blinking on the display.
  3. Press the TEMP./SELECT/CLOCK but- ton (7) (the minutes flash on the display).
  4. Press the TIME/TOAST COLOR buttons (8) to the desired time (minutes). The time set will begin blinking on the display.
  5. Press the TEMP./SELECT/CLOCK but- ton (7) to confirm. It is pos- sible to press the button at any time during cooking to display the current time (the display shows the time set).
  • If you wish to change the hour on the display once it has been set, press the TEMP./SELECT/CLOCK but- ton (7) before proceeding to set the new time as described above.
  • It is possible to display the current time even after starting a function, by pressing the TEMP./SELECT/CLOCK button (7) (the time is displayed for 2 seconds).

Oct 14, 2010 | DeLonghi DO400 Toaster Oven with...

1 Answer

I need to change the time on it.


Hi,
You can try the following steps
Setting the clock
1 Press and hold SEL (select) for more
than 2 seconds.
“DEMO,” “CLOCK H,” “CLOCK M,” “DIMMER,”
or “AMP GAIN” appears on the display.
2 Set the hour.
1 Select “CLOCK H” (hour) if not shown on
the display.
2 Adjust the hour.
1 2
3 Set the minute.
1 Select “CLOCK M” (minute).
2 Adjust the minute.
1 2
4 Finish the setting.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button, the
display changes as follows:
• During tuner operation:
• During CD operation:
• During power off:
The power turns on and the clock time is
shown for 5 seconds, then the power turns off.

Thanks for using Fixya
Proton

Jul 27, 2009 | JVC KD-G200 CD Player

Not finding what you are looking for?
Canon PowerShot ELPH 150 IS Digital Camera Silver Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

old marine
old marine

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Poul Brinchs Larsen

Level 2 Expert

159 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...