Question about Sharp Aquos Televison & Video

Open Question

Sharp aqueous tv : every time I tun it on I have to go through the complete set up.

Aqueous LE 660u

Posted by on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
dante777

C. Dante

  • 623 Answers

SOURCE: Hook up Avertec 3200 to Sharp Aqueous TV

After I found the manual somewhere on the internet, I realized that it is already available here. (Lucky you!)

I could not find a specific manual for your Aquos TV (which model?). Look into your manual, and see if there is an option to connect via VGA of HDMI for video
If you want to use your TV speakers, it depends what audio input options you have on your TV. You might need a cable like this:

4dfae91.jpg

The red/white connectors into your TV, the 2.5mm plug into your computer.

Posted on Jan 11, 2009

Ad

sgrahamtx

  • 41 Answers

SOURCE: Sharp Aqueous 37" LCD TV

From the information you have provided failed capacitors in the power supply is likely causing the problem. The safety circuitry shuts the TV set down when it detects a problem. This model of TV has over 2,000 parts which include millions of transistors inside the integrated circuits. The capacitors will change value, leak and become defective. Resistors will change value and burn. Integrated circuits and transistors can go bad. This can cause other components to become defective, which can have a domino effect and cause other parts to fail. Replacing one defective part may make the TV operate for a short time but the part will fail again since if the parts that caused the failure to begin with are not replaced. The only way to know for sure what is causing the problem, which parts that are no longer within factory specs and for proper repair all the electronics must be diagnosed by someone with the correct electronic test equipment and the skills to use the test equipment. The repair should cost about $250 if carried into a TV repair shop. A small TV repair shop will often charge less than a large repair facility.

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

In my tv sharp aqueous I receive the message no signal.what can I do.


What is the TV input control menu set to? It may be set to another function like HDMI or Aux. It is a common mistake.

Sep 06, 2016 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

Sharp aqueous won't turn on


Did you check power supply? Fuses?

Feb 21, 2016 | Sharp LC60C6400U 60 in. HDTV

1 Answer

I have a sharp aqueous 60" tv. It stopped responding to remote and manual buttons. I can unplug and plug back in, and it will work for a few minutes, then will stop responding again.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/

Dec 28, 2015 | Sharp AQUOS 60" 1080P 120Hz LED Smart HDTV...

1 Answer

Is my tv main board bad


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.

Jun 20, 2015 | Sharp LC Televison & Video

1 Answer

My aqueous 50 inch tv has white lines all over. You can see the picture but just barely through the lines! How do I fix it?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Oct 15, 2014 | Sharp Aquos Televison & Video

1 Answer

Keeps asking for paper,there is paper in tray.there is also an orange light on which keeps flashing .HP f2180


Need to clean the Paper censer

which will be the permanent solution of your Issue

Service is rewired for your printer

aqueous, solvent and semi-aqueous emulsions for electronic components

I don't know how to make you understand you can check the Pic below.
bcf4d2e.jpg


Jan 05, 2010 | HP Deskjet F2180 All-In-One InkJet Printer

1 Answer

I am thinking about buying a used 65 sharp


I wouldn't recommend buying it unless it came with some type of warranty.
The most common thing you would be looking at for repairs if something goes wrong would be the Backlight Inverter Board or the Power Supply Board. It's what powers the big screen like that. Replacement board for one of them would be well over $200. And we're not talking about labor on top of that from the repair shop.
If you get it, try to get warranty with it. Add on extended warranty if possible.

Jun 04, 2009 | Sharp AQUOS LC-65SE94U 65 in. LCD HDTV

1 Answer

Hook up Avertec 3200 to Sharp Aqueous TV


After I found the manual somewhere on the internet, I realized that it is already available here. (Lucky you!)

I could not find a specific manual for your Aquos TV (which model?). Look into your manual, and see if there is an option to connect via VGA of HDMI for video
If you want to use your TV speakers, it depends what audio input options you have on your TV. You might need a cable like this:

4dfae91.jpg

The red/white connectors into your TV, the 2.5mm plug into your computer.

Jan 11, 2009 | Averatec 3200 Notebook

1 Answer

Sharp Aqueous 37" LCD TV


From the information you have provided failed capacitors in the power supply is likely causing the problem. The safety circuitry shuts the TV set down when it detects a problem. This model of TV has over 2,000 parts which include millions of transistors inside the integrated circuits. The capacitors will change value, leak and become defective. Resistors will change value and burn. Integrated circuits and transistors can go bad. This can cause other components to become defective, which can have a domino effect and cause other parts to fail. Replacing one defective part may make the TV operate for a short time but the part will fail again since if the parts that caused the failure to begin with are not replaced. The only way to know for sure what is causing the problem, which parts that are no longer within factory specs and for proper repair all the electronics must be diagnosed by someone with the correct electronic test equipment and the skills to use the test equipment. The repair should cost about $250 if carried into a TV repair shop. A small TV repair shop will often charge less than a large repair facility.

Apr 08, 2008 | Sharp Aquos LC-37GD6U 37 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...