Question about AT&T Lands Phones

Open Question

AT&T E2125 Cordless Phone

I installed a new battery in the handset and laid handset in the charging cradle and nothing happened. No red light on charging cradle, and there is a popping noise from the handset? It will not charge.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Dual Maxus 5.8GHz Handset Cordless Phone

Worked great! Thanks!

Posted on Jan 26, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: ELBT595 Handset Not Turning On

Check the handset battery -- if there is a slight "bulge" on one side (ie: not COMPLETELY flat) then the problem is with the battery. I had that problem and had to order a new one. That said, I just installed the new battery, and while it now charges, the handset won't connect to the base unit. The base unit works (tried the speakerphone), but there is not connection between base and handset.

Posted on Apr 14, 2008

onenone

  • 1 Answer

SOURCE: My handset won't charge

Try charging it in a different cradle if you have more than one handset.  This has happened to me where a particular base will not charge a particular phone.  Once charged elsewhere the problem resolved.

Posted on May 03, 2008

Anonymous

  • 928 Answers

SOURCE: answering switched to handsets

Just to confirm this is a GE unit right?

You can try to unplug the unit for about 2 or 3 mins. then plug it back in see if you can retrieve now.

Normally as well the voice mail is provider specific so you might have to call your provider for information on retrieving it.

Posted on Nov 26, 2008

heeman mohun

  • 1341 Answers

SOURCE: my philips cordless phone wont charge with new batteries

try the old battery if you still have it then see if it holds a slight bit more once charged.If it does then go back to the seller of the new battery for a replacement.

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed new battery charged overnight phone still does not work.


Some batteries may require up to 24hour charge cycle before functioning, when the handset is on the base do any lights illuminate?

If you have a working handset I would try charging that on the base unit - you may have a faulty power adapter or cradle, not the battery

Apr 17, 2014 | Panasonic KX-TD7896 Cordless Phone

2 Answers

Mint Plus Turbo Charging Cradle won't function properly


Cradle and contacts are fine. Cradle circuit is nothing but a reed relay and few wires, relay closes on proximity to robot's body, therefore no voltage on contacts before robot is close to cradle.
There is a thermistor inside of battery, and mine was bad. I removed it and now I am charging the battery from my bench power supply at about 220 ma current, overnight, and it works. Probably the solution is to get a new replacement battery, but the one with the thermistor inside (OEM), easily recognized by the third wire, and all should be fine, assuming that nothing else is wrong with charging circuit or power adapter (12v/1A)
Hope this will give you some ideas of where to poke.
Once successful, please post your solution.

Jan 19, 2013 | Mint Plus Turbo Charging Cradle

1 Answer

New out of the box wont power on


Hi.. Let me try to help you if I can... I'd like you to check a few things,

1) Open battery cover on handset & make sure that the battery pack is installed correctly, and not upside down. Also make sure the little wires that come from battery pack are plugged into the tiny jacks of the phone (usualy red & black wires) in handset is fully attached & pushed snuggly into the handset... and if No wires, check to ensure the part that does connect the battery to handset is not covered with a plastic film of tape or paper as right from a manufacturer they sometimes do that to preserve length of battery until product is sold to you..

2) Check the bottom of the handset phone, that sit in the cradle of the electric part of the recharger, and make sure there is nothing like plastic or paper covering the connections between the bottom of the handset and the charger. Make sure there is a full on connection for a full charge to the handset. As with some cordelss phones Ive had the red LED light will not come on if there is something blocking a full connection for a charge.. The red LED light on base, only comes on when the electricity is flowing into the handset. The slightest tilt not allowing handset a full charge, wont give it a FULL charge.

3) You say " NEW. Out Of The Box" I hope when you connected the battery pack into the handset, and made sure it was connected right, you then allowed handset to charge at least a FULL 12 -24 hours before trying to use your new cordless phone. as the batteries right out of the box, are rarely already fully charged when any cordless phone is bought and then it does need 12 - 24 hours for a FIRST FULL CHARGE...

If you can check all 3 of these questions, and let me know how things are back on this posting, if you stilll can not solve the problem after a full charge to battery, I may have some other ideas that can help.

Good Luck
Stevie

Feb 14, 2010 | Uniden Cordless Phone

1 Answer

I am unable to get a dial tone on my new uniden cordless phone ?


Did you insert the batteries properly and register the handsets? You must give them a good charge and put both handsets into the main cradle before they will work at least ten seconds, that will register the handsets to that main cradle. Good Luck...

Feb 14, 2009 | Uniden Cordless Phone

2 Answers

VTECH VT9121


voice message light keeps blinking

Aug 25, 2008 | Vtech 9009111 Cordless Phone

2 Answers

Stopped recharging


Two things: 1) This mouse and charger does not like rechargeables larger than 1800mAH. The light on the front will(sometimes) go red if you use a higher rated battery than the 1800mAH. You said you replaced the batteries, but might want to check their rating. 2) My mouse gets harder and harder to get a good connection when putting it in the cradle. Might be the contacts are getting dirty. When you put it in the charger, you should see the optical beam (red on the back) go out and the green light on the front turn on. If this doesn't happen, it isn't connected.

You do have the cradle plugged in and the batteries installed the right direction in the mouse? I know it's obvious, but the questions always have to be asked.

Aug 05, 2008 | Logitech MX 700 Mouse

4 Answers

Battery charging



i have not used my camera since June, when i went to charge the battery the other night the Red light just kept flashing even after leaving it for 8 hours, i can get pictures from it which are stored in it but the shutter will not open whilist in and out of the cradle.

May 28, 2008 | Casio Exilim EX-S880 Digital Camera

1 Answer

ELBT595 Handset Not Turning On


Check the handset battery -- if there is a slight "bulge" on one side (ie: not COMPLETELY flat) then the problem is with the battery. I had that problem and had to order a new one. That said, I just installed the new battery, and while it now charges, the handset won't connect to the base unit. The base unit works (tried the speakerphone), but there is not connection between base and handset.

Feb 18, 2008 | Uniden ELBT595 Cordless Phone

1 Answer

My handset won't charge


Try charging it in a different cradle if you have more than one handset.  This has happened to me where a particular base will not charge a particular phone.  Once charged elsewhere the problem resolved.

Feb 14, 2008 | Motorola Mobility MD671 Cordless Phone

1 Answer

Red Light on nothing else works


recharge the battery by connecting the HP iPAQ to AC power using the cradle or the AC adapter to atleast 6 hrs continuously

Dec 01, 2006 | O2 Xda IIs Pocket PC

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

6068 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...