Question about Sharp Aquos LC-32D62U 32 in. HDTV-Ready LCD TV
Powering on lights up power led immediately with one relay click then it goes through 3 sets of 2 relay clicks before 1 last relay click with power led still green. After, OPC and Power blink once together than 2 Power blinks before repeating. I did get the display to come back once by depressing keys when plugging in the power cord and it worked for several hours even powering off and back on. After powered off for more than an hour, it came up briefly before loosing the display and going back to the clicking and led light sequences. I cannot get it display again.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It's a power supply related problem. When it turns itself off, this it called protection mode. The TV automatically turns off to protect other parts form being damaged.
The most common problem is the Power Supply Unit or the Backlight Inverter Board.
You may have to take the TV to a repair shop to find out which one is bad. Paying a repair shop to replace the board for you maybe more than the TV is worth. If you let them diagnose it and you replace the bad circuit board yourself, it would be cheaper.
Here's a place I use to get parts for TVs:
The problem is the repair shop may charge you double or three times of what the part costs at the web site link above. Then, plus labor. I just want to save you money. :)
Posted on Jun 03, 2009
This problem very common in sharp tv.The POWER,OPC flashes.First turn on have power LED indicator light stable at all? Tries the power again couple times will have backlight come back on,than it will work.Not at all more than 5-6 times than ur main turner signal board is the problem,must replaced.
Posted on Jan 05, 2010
Testimonial: "Took a part back panels looking at the circuit board power capacitors, plugged in TV to power outlet, and powered up normally."
Sharp LED/LCD EEP cleared Step 1 Remove Mains Plug 2 Press On/Off Switch from LED/LCD Panel 3 Press Ch Down & Input Switch together and plug in mains cord 4 LED/LCD will start 5 "K" will appier on Screen 6 Press Ch Down & Vol Down from LED/LED Panel 7 1/9 Page will appier on Screen 8 Go to 9/10 page by pressing Up & Down arrow of remote 9 Select EEP Cleared 10 Press ok button from remote 11 On Screen dispay EEP running 12 Remove Mains Plug after complete EEP Run 13 Restart LED/LCD
Posted on Jan 08, 2016
Tips for a great answer:
Oct 30, 2016 | Sharp Televison & Video
Jan 31, 2016 | Sharp LC-32DV22U Widescreen 32-Inch Class...
Mar 07, 2013 | Computers & Internet
Mar 04, 2013 | MSI Computers & Internet
Feb 06, 2013 | Panasonic Viera TH-42PZ85U 42 in. Plasma...
May 21, 2012 | Crown XLS 602 2-Channel Amplifier
Aug 06, 2011 | Sharp AQUOS LC-C4654U 46" LCD TV
Jul 03, 2011 | Sharp AQUOS LC-42D85U 42 in. LCD TV
Feb 05, 2011 | Sharp Aquos LC-46D62U 46 in. LCD HDTV
Checking the Router's LEDs
Make sure the System LED is lit.
NOTE: If the Diag LED doesn't goes off, you need to upgrade the router's firmware. For instructions, click here .
Make sure the LAN 1-8 ports is lit depending on the computers connected to the designated Ethernet port.
NOTE: If the LAN 1-8 port is not lit, make sure that the computer is powered on. You can also try connecting the PC using another working cable.
Make sure the Internet (WAN1) and DMZ/Internet (WAN2) LED is lit.
NOTE: If the Internet or DMZ/Internet LED is not lit make sure the Broadband modem is powered on and that the modem is properly connected to the Ethernet port
You can access the web-based user interface utility of the RV082 by using one of two methods:
1. Open a web browser (Internet Explorer or Netscape Navigator)
· By IP address: Type http://192.168.1.1 (192.168.1.1 is the default IP address of the RV082)
and click Go or press the [Enter] key.
· By Hostname: Type http://RV082 and click Go or press the [Enter] key.
2. When the username and password prompt appears, type admin in both the username and password fields. (admin is both the default username and default password for the RV082).
Nov 08, 2010 | Linksys RV082 Router (RV082-AU)
281 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: