Question about Coffee Makers & Espresso Machines

1 Answer

My caffitally coffee machine. The lid where you put the water broke can I replace that thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 123 Answers

You can order spare parts here. They should have what you need. http://www.caffitalysystem.com.au/caffitaly-shop

Posted on Jul 06, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and replace water lid on E8


The hooks in the lid are tricky to remove without breaking. It is best to remove the top cover. To do so you need special key to open the machine. Order the special key from the link below.
Watch the video posted on You tube channel "Parts Guru USA".

Descale the machine every three months using manual descaling.
Jura instructions are misleading and create unnecessary error messages. Services Unlimited Inc Parts Guru Since 1988 Services Unlimited Inc Parts Guru Since 1988

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edward_bbd2c7ff4ee1828a

Apr 03, 2016 | Jura Capresso Impressa E8 Espresso/Coffee...

1 Answer

Where can I find a replacement water reservoir lid?


Look on eBay.... then AMAZON...

or construct a search line for the internet for spares/parts...

My QUICK eBay search got this for $14 (USD)..

Cuisinart DGB 600CL Thermal Carafe Lid Black New eBay

(looks like what you said)...

Happy hunting

Carnac the Magnificent

Dec 01, 2017 | Cuisinart DGB-600BC 10-Cup Coffee Maker

1 Answer

Where to buy replacement water tank for Nespresso Essenza C100


I need to find a replacement water tank for my nespresso essenza C100 coffee machine. Mine broke, any ideas where I might be able to find one?

Jan 12, 2013 | Nespresso Essenza C100 Espresso...

1 Answer

SAYS COFFE READY PUSH LARGE CUP AND A COUPLE OF DROPS COME OUT THAN SAYS FILL AND PUSH STEAM HAVE DONE AND REDONE SEVERAL TIMES STILL NOT GETTING A CUP OF COFFEE TOOK TANK OUT AND CHECKED FOR FLOTATION IT...


Hello.

1 Perform the initial setup on the coffee maker. Make sure the coffee maker is not plugged in. Slide the empty funnel into the funnel guides, fill the decanter with cold water, open the lid and pour water from the decanter into the brewer, put the decanter back on the base, then close the lid and wait three minutes for the internal tank to partially fill. Open the lid, fill the decanter with cold water again, and once more pour the water directly into the brewer. Put the decanter back on the base and wait for water to flow out of the funnel and into the decanter. Once it has stopped flowing, pour out any water that is in the decanted and plug in the coffee maker. Press the on switch to turn the coffee maker on and heat up the water in the tank.

2 Ensure the lid is completely closed. If the lid is open, the Bunn coffee maker will not brew coffee.

3 Check the see how much water is in the water tank. The Bunn coffee maker will not begin brewing coffee if less than 20 ounces (4 cups) of water is present in the water reservoir tank.
4 Delime the coffee maker. Unplug the coffee brewer and allow it to cool down. Remove the sprayhead by turning it by hand and set it aside. Insert the flexible deliming tool into the sprayhead tube until all but two inches are showing. You may need to twist and force the tool to go in. Slide the tool in and out several times to loosen lime buildup.
Check the sprayhead for lime buildup. If there are flakes of minerals, they can be removed with a toothpick. Scrub the sprayhead with soap and water. Rinse the sprayhead with water and replace it in the coffee maker. Pour water into the water tank and turn the coffee maker on, allowing water to run through without making any coffee. This will flush any lime fragments through the system. Empty the decanter

Thanks.

Sep 18, 2011 | Jura Capresso Impressa S90 Espresso...

1 Answer

How to make coffee with 101-cup percolator urn (Regalware)?


Simply fill with COLD water to the number of cups desired.
Place the stem and basket in the pot and put one 8 oz cup of coffee for every 20 cups of water into the basket...when doing 100 cups I add an extra 12 oz of coffee for a good coffee flavor.
Place the perforated lid on the coffee basket that is in the pot (if there is a lid--some do not have a lid). Put the cover for the coffee pot in place.
Plug in.
Turn on if there is a switch.
Give these large pots about 1 minute per cup, brewing time...that is a little over an hour usually to brew 100 cups. The coffee maker will percolate with the water coming up through the stem and over the coffee as the water heats. Usually there is an indicator light that comes on when it is finished.

If holding the coffee for awhile, it tastes best if you remove the stem and basket and it will maintain the heat without doing more "perking" and becoming stronger or bitter.

Be sure to wash it out and dry it well, leaving the lid loose or upside down for storage so that the pot doesn't become pitted. Blessings, Louise

Nov 14, 2008 | Regal Ware 426473 Black Satin Coffee Urn...

1 Answer

Revere Ware old fashioned coffee pot


1) Boil the water you’ll need in another pot.
2) Put 1 tablespoon of ground coffee (drip grind, not percolator grind) in the reduced diameter, perforated bottom of the brewing chamber.
3) Put the grind/water separator (the perforated, flat handled plate with cup markings on the handle) in the Brewing Chamber, over the coffee grounds.
3) Put the Brewing Chamber on top of the Holding Chamber.
4) Pour the appropriate number of cups boiling water into the brewing chamber; put the lid with the black knob on the brewing chamber.
5) Let the water drain through the coffee grinds (5-10 minutes).
6) Remove Brewing Chamber, clean out the coffee grounds, and replace the lid on the holding chamber.
7) Enjoy your coffee! Keep it warm on the stove at LOW heat setting.

for the most information on the Revere cookware lines, go to: http://mysite.verizon.net/vzeoywo4/theshineshop2/id1.html

Charlie

Jun 16, 2008 | Coffee Makers & Espresso Machines

4 Answers

Broken latch on coffee grind lid


I have drilled a small hole where the latch was and put a screw in. The screw serves as a latch and has worked fine for years.

Aug 10, 2007 | Cook's Essentials CEMB10TC

Not finding what you are looking for?
Coffee Makers & Espresso Machines Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coffee Makers & Espresso Machines Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Pierre Laplante

Level 3 Expert

2042 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...