Question about AT&T Lands Phones

Open Question

My caller ID is not working on my AT&T 974 phone. We have unplugged and removed battery, still not working. Please help!

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 163 Answers

SOURCE: line error on caller id

there are a very small capacitor in the board that produce low battery mesege when it get damage, but you gona need a tech to repair your phone there are another problem in your phone its not a seting problem...good luck

Posted on Aug 06, 2006

Ad

Anonymous

SOURCE: caller-id quit working

This is a followup to my earlier suggestion. My caller id is working. So, the culprit had to be related to the 9V battery. Just try my earlier solution from 1/20/07. If it works..fine. If not, bye-bye to the phone.

Posted on Feb 10, 2007

Anonymous

SOURCE: Caller ID Stopped Working - Think the phone needs to be reset?

Not sure why this worked, but I went to the Menu and the Set Area Code selection. The area code setting was blank, so I entered my area code and saved it. Caller ID started to work again. As a test, I went back to the Set Area Code selection and deleted the area code and saved it. It is currently still working. Seems really odd, but it worked for me.

Posted on Feb 24, 2008

SVMGRE

  • 1 Answer

SOURCE: caller id

the digital answer machine did not torn on? Why?

Posted on May 08, 2008

Anonymous

  • 1 Answer

SOURCE: AT&T 974 Caller ID has quit.

Unplug everything then replug should reset the Caller ID

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't the LCD display doesn't work?


Does the LCD not work at all? or do you mean that it doesn't display Caller ID information? If the LCD is completely dead, you'll need to get the phone repaired. On the other hand, if it's just the Caller ID that's on the fritz, try this: unplug the base from the power socket; remove any batteries in both the base and the handset; wait one minute; plug the base back into the wall and replace all batteries. This will reset the Caller ID so it works again. (Depending on the phone you may or may not lose settings and memorized numbers.) If this doesn't help, the problem will require a professional repair.

Aug 06, 2014 | Uniden D3097 LOUD & CLEAR Cordless Phone -...

1 Answer

My caller id is not working on my at&t 974 phone


Same thing happened to me. Here's what I did: 1) Unplug phone. 2) Remove backup battery. 3) Wait at least 5 minutes. 4) Plug phone back in and insert battery.

Step 3 is important. I only waited about a minute the first time and the problem remained.

Jan 07, 2014 | AT&T ATT-974 Corded Phone

1 Answer

No caller ID. TP company says I have service.


  • Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .

  • Is the battery old? - Replace the battery.

  • Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.

  • Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.

  • Do you have Caller ID service with your telephone company - In order to receive Caller ID records, you must subscribe to the standard name and number Caller ID service available through your local telephone company. If the Caller ID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.

  • Caller ID shows up after second ring - Be sure to wait until the second ring before answering. Caller ID signals comes through after the first ring, if caller pick ups phone too soon Caller ID signal will not be transmitted to the handset.

  • Confirm that caller ID is still working on that particular line by checking another phone on the same line - If Caller ID is not coming through contact your phone company provider.

If this does not fix your problem, contact your authorized Service Center.*

Oct 16, 2010 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

AT&T 974 Caller ID has quit.


Unplug everything then replug should reset the Caller ID

Dec 11, 2009 | AT&T ATT-974 Corded Phone

1 Answer

Caller ID suddenly stopped working on our KX-TG5771 cordless sets


I have had similar problem the way I solved it .
Unplug all units from ac
Take out all batterys
unplug phone line.

Put back in reverse order .
They allways seem to work after.


I have noticed that if the phones are charged on the wrong stations they seemed to get confused for some reason.
Hope this helps

Doug

Dec 13, 2008 | Panasonic KX-TG2357 Cordless Phone

1 Answer

GE MODEL 28112 DECT 6.0 CORDLESS PHONE


I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Mar 26, 2008 | GE 28112 Trio Cordless Phone

1 Answer

AT&T phone model E5634B


SOLUTION to AT&T Cordless Telephone/Answering System 4 phone set Model E5634B - Cannot answer incoming calls nor does caller ID work on phones.
Unplug the base for a few minutes, plug base back in, remove and reinsert the battery on each phone that does not work, then place each handset in the base for few minutes. Worked for me...all 4 phones can be answered and caller ID works!!! Hope this works for you... :o)

Jan 12, 2008 | AT&T E5634B Phone System w/ Caller ID

2 Answers

Caller ID Problem on the GE2811 Twin cordless phone system


How to get the caller ID to work on the additional GE DECT phone handsets. You must follow these steps in the exact order :
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes. reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in.
It takes about another 10 minutes after that before all phone handsets start recognizing caller ID.

Oct 23, 2007 | GE 28111 Cordless Phone

1 Answer

Line error on caller id


there are a very small capacitor in the board that produce low battery mesege when it get damage, but you gona need a tech to repair your phone there are another problem in your phone its not a seting problem...good luck

Aug 05, 2006 | Emerson EM-CKT9087 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

6063 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...