Question about Fedders Dehumidifiers

1 Answer

My Fedders dehumidifier Model A6DH50B2A REVC does not start after emptying water. The "full" light remains on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 313 Answers

Trip switch is getting stuck. Wiggle it or try WD-40.

Posted on Oct 03, 2017

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 184 Answers

SOURCE: Fedders Dehumidifier

ALL DEHUMIDIFIERS REQUIRE ROOM TEMPS TO BE AT LEAST 65 DEGREES AND A HUMIDITY OF AT LEAST 50 % TO OPERATE PROPERLY. ANYTHING LESS AND IT MAY FREEZE THE EVAPORATOR COILS. EVAPORATOR COILS WILL ALSO FREEZE IF THE COILS ARE DIRTY AND HAVE RESTRICTED AIR FLOW.TRY TAKING THE COVER OFF OF THE UNIT AND CLEANING BOTH SETS OF COILS INSIDE. THEY ARE COPPER OR ALUMINUM WITH FINS ON THEM.
ALSO CHECK THE FAN TO BE SURE IT IS RUNNING.
THAT WILL CAUSE AN OVERHEATING CONDITION AND WILL SHUT DOWN THE COMPRESSOR ALSO.

Posted on Apr 08, 2008

Anonymous

  • 69 Answers

SOURCE: My Fedders dehumidifier keeps reading full all the time

When you move the float up to enage the switch does it shut it off? If not you may need to adjust it

Posted on Jun 21, 2009

SRF518

SRF518

  • 232 Answers

SOURCE: Fedders a6dh50b2a squirrel cage lost a blade stuck

find your motor shaft diameter and buy another fan from grainger supply.

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model# a6dh50b2a. Bucket empty. Why does full bucket indicator light up and unit turns on and right off?


This can be a fault of the internal interlock (switch) that is closed when the bucket is in place. Normally, the purpose of the interlock is to prevent the dehumidifier from mindlessly dumping condensate into a missing bucket.

Sep 21, 2015 | Fedders Dehumidifiers

1 Answer

Fedders a7dh45b2a*a-r dehumidifier shuts off before the bucket fills


Actually, it's probably doing what it should. Let me explain: Dehumidifiers run until they have lowered the humidity/moisture level to where you have the humidity extraction level set. At that point, the unit shuts OFF, until senses the humidity level has risen above where you set the level and it turns ON again. That doesn't mean the bucket will always be full when it shuts OFF. It may turn ON & OFF many times before the bucket is full. Watch for the Bucket Full Light to illuminate. That's when the bucket is FULL and needs to be emptied.

Hope this helped you understand how the unit works.

Jun 29, 2011 | Fedders A7DH45B2A Dehumidifier

1 Answer

Dehumidifier runs but doesn't collect water also the full light won't turn off and the container is empty. Float is in it.


Hi,

Here is a tip that explains what can be happening to make the dehumidifier show that the bucket is full when it is not.

Dehumidifier Problem It shows Bucket Full

heatman101

Jun 29, 2010 | Fedders A7DH45B2A Dehumidifier

1 Answer

FULL LIGHT FLASHES


An automatic overflow switch and Container “Full” indicator light are provided to turn the
dehumidifier off before the container overflows. When the indicator light on the control panel
glows, the water container must be emptied. If the light remains on and the dehumidifier does
not begin to operate make sure the float is attached to the water container.


When the condensate water container is full, the indicator lights up.
1. Turn the power off before removing container. Wait 3 minutes for
any remaining water to drain into the condensate container.
2. Tilt the container forward then lift carefully by the handle.
3. Empty and gently re-insert the container.
Important:This water is not suitable for drinking.

Please rate and god bless:)

Apr 24, 2009 | Fedders A7DH45B2A Dehumidifier

1 Answer

Stopped working for no apparent reason


The main control board has failed and needs to be replaced

Apr 23, 2009 | Fedders R6DH45X Dehumidifier

Not finding what you are looking for?
Dehumidifiers Logo

Related Topics:

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fedders Dehumidifiers Experts

Bill Long

Level 3 Expert

606 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Albert

Level 1 Expert

16 Answers

Are you a Fedders Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...