Question about Ovens

1 Answer

The power went out and now don't how to rest the clock on a 243 Bompani electric oven.

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 240 Answers

Here's the manual:

https://www.manualslib.com/manual/822771/Bompani-Oven.html?page=5#manual

Thanks. Hope that helps
Ned

Posted on Oct 16, 2017

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

seakish

  • 492 Answers

SOURCE: My GE Oven heating element and timer clock went

Try unplugging the oven and let sit for 10 min. This will reset the curcuit board and reboot the electronics. You may have to pull out the stove o get to the cord.

Posted on Apr 30, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: Keypad/clock went blank

Normally when a power surge lands a direct hit on a non protected circuit board, it will usually fry it completely. you can confirm this by shutting down the power for 5 minutes. if the control doesn't respond after the 5 minutes of no power, this will confirm circuit failure due to the surge and, you will need to replace the board in this case.

Posted on May 21, 2009

Anonymous

  • 73 Answers

SOURCE: I have a built in electric oven and yesterday the

find the main breaker for the oven turn it off for about a minute and then turn it back on ...yep some times you have to reboot even your oven
Good Luck

Posted on Oct 11, 2009

Anonymous

  • 22 Answers

SOURCE: electric stoves

Most stoves you must set the clock before the oven will work.I know sounds stupid...

Posted on Dec 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint oven display not working just clock flashing


Your electric stove has power through 220, wired separately from the rest of the outlets. Go to the breaker for this, shut down total power, and see if that helps. Sometimes it does not take much to reset.

Mar 05, 2014 | Neff U1661 Double circotherm super...

1 Answer

Ovens won't heat


Have you set the clock alot of ovens need the clock set so the oven will work, this is a safety thing so if you set the oven to turn off after 1 hour or at a certain time of day and say the power went out or the gas was turned off and came back on then the oven won't just start up on its own

Mar 08, 2011 | GE Monogram® ZET958 Electric Double...

1 Answer

Power went out. Back on now, monitor won't show on range. Can't set clock, so my stove won't work now. Any suggestions?


HI, you will need to replace the EOC/clock. the power surge has fried the chip set. Replace the control board.

Jun 22, 2009 | Frigidaire FEB27S5A Electric Single Oven

1 Answer

Keypad/clock went blank


Normally when a power surge lands a direct hit on a non protected circuit board, it will usually fry it completely. you can confirm this by shutting down the power for 5 minutes. if the control doesn't respond after the 5 minutes of no power, this will confirm circuit failure due to the surge and, you will need to replace the board in this case.

May 18, 2009 | Maytag CWE5800A Electric Double Oven

1 Answer

My GE Oven heating element and timer clock went


Try unplugging the oven and let sit for 10 min. This will reset the curcuit board and reboot the electronics. You may have to pull out the stove o get to the cord.

Apr 30, 2009 | GE Profile JTP18 Electric Single Oven

1 Answer

Stoves 720ef electric double oven not working


According to the circuit diagram on page 31 of the handbook, power for the ovens passes through the clock. The power feed is direct for the actual clock but via a seperate Thermal Cutout for both the top and bottom ovens. I think it is highly unlikely that both Thermal Cutouts have failed at the same time. I would try turning the power off totally to the oven for a while and then turning it back on, set the time and ensure the oven is in manual mode. As the top and bottom ovens have seperate controls after the Programmer and both are not working, it has to be the programmer that is not extending the power through to the rest of the oven.

Nov 11, 2008 | Stoves 720EF Electric Double Oven

2 Answers

Electric stoves


if the model has a digital clock and when the power went of it may have fried the little computor.if you dont have trip switchs in fuse box

Nov 07, 2008 | GE JGRP17 Gas Single Oven

1 Answer

Oven not heating but the fan is working and clock flashing auto


You need to rest the timer. to get it off auto,otherwise the oven will not work.
Refer to your instructions.

Oct 20, 2008 | Neff B1421 Electric Single Oven

1 Answer

Error codes


Clock error it happens when the external clock goes out of sync with the internal clock nothing to worry about it should have went away on its own after about 30 seconds

Dec 06, 2007 | KitchenAid KEBC277 Electric Double Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...