Question about Locks & Locksmithing

Open Question

I have a stramm electronic safe. Batteries ran flat. Opened door with key. Replaced batteries, but no sign of life. Tried other batteries. Still no lights on. Please advise

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: sandleford electronic safe es20

have just had the same problems if you had the key there is a red button inside the door to reset the code but obviously no key no red button I have the sandleford number to call 03 97750699 or try the factory pre set 159 A or B see how you go

Posted on Sep 07, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: BATTERIES FLAT CANNOT OPEN MICROMARK SAFE WITH KEY

http://www.rotteneggs.com/r3/show/se/198433.html

:D x

Posted on Jun 02, 2009

Anonymous

  • 13 Answers

SOURCE: SURE SAFE ELECTRONIC CONTROL PAD AND BATTERIES

try default number 159A

Posted on Oct 04, 2009

SOURCE: medalist digital safe

Hi Brian, You'll need to have the key re-encoded, which can only be done with the correct equipment, available at the agent or maybe at your service center. Regards John

Posted on Jun 24, 2012

Sirach

Allen Guyton

  • 59 Answers

SOURCE: can't open hardline safe

Usually if your code has worked in the past it is a bat problem. Try purchasing a cheap bat tester to verify bats are good. Once verified with good bats try code again if still not working there are other steps that can be taken. Hope this helps.

Posted on Sep 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How do I change battery in safe


Usually there is a compartment on the inside of the door that holds the batteries.

Jan 30, 2015 | Home Security

2 Answers

Manual for stramm digital electronic safe manual


The Stramm safe we have is a small one that we use to store keys for our drivers. To change the combination, open the safe with the current combination. Sorry, can't help you if you don't know that. Inside the door is a plastic panel covering the batteries. Pinch the plastic catch at the top and open the panel. There is a small red button which you can press to change the combination. When you press it, you will hear a double beep. Enter your desired new combination. The trick is that the last digit must be either an "A" or a "B" which signals the end of your combination. For example, if you want your new combination to be 123456, you can't do that. The closest you can come is 123456A or 123456B. Hope this helps. Steve, Mbeya, Tanzania

Apr 06, 2013 | Safe International Digital Electronic Safe...

1 Answer

Batteries dead and no key, has number 883203 on it, perhaps model number, help please as i don't know how to get in to put new batteries in and no instructions


If the container is locked with dead batteries to the electronic lock and no key then you wont be abel to replace the batteries as they have to be replaced from the backside of the door. It was a common problem that I would run into when I worked as a service tech and the only option is to drill the container.

Jun 21, 2011 | Safe International Electronic Digital Safe...

2 Answers

Batteries are dead and I've lost the keys. Its an old electronic digital safe and I have the key number that goes with it. Know where I can get replacement keys or if its cheap enough to have...


Only through a licensed locksmith. Provide the key numbers and possibly even take the safe to him/her as proof of ownership. Locksmiths have to record all attemots to open safe's or maling f keysto the police.

Please provide a rating for my help++++Thanks for using FIXYA

Jun 15, 2010 | Safe International Digital Electronic Safe...

1 Answer

Unable to open electronic safe


Locksmiths say this is how to install sentry safe batteries
slide open the battery cover located just below the keypad.
Insert a paper clip or pen point into the small hole in the cover. Push in while sliding cover to the right. Disconnect and remove the battery holder. Insert the 4-batteries as indicated.
reconnect the connector and put back the battery holder. Slide the cover back in place.
How do I insert the batteries on my advanced electronic lock safe? On the newer model Fireproof Sentry Safes my locksmith recommended me To install batteries,
turn the electronic lock case to the right and remove. Insert four new batteries as indicated, replace the electronic lock case and turn to the left to reassemble.

Mar 06, 2010 | Sentry Fireproof Safe

5 Answers

How to unlock a cathedral electronic safe ea25


After opening the electronic safe (with the pre-set factory code of 159B) locate the small red button on the
inside of the door near the hinge.

2. Press the red button and then release it, you will hear a beep. DO NOT SHUT THE DOOR UNTIL YOU HAVE CONFIRMED THAT YOUR NEW SECURITY CODE HAS BEEN ENTERED CORRECTLY.
3. With the door open, enter your own personal security code, which can be 3- 8 digits long, and confirm your new code by pressing the letter “B” on the electronic touch pad. Before you close the door, try the new security code to make sure the lock release the knob so you can turn it and retract the live action locking bolts.
If the code fails, go through steps 1-3 again. If the code works successfully, then you should lock the safe. When you open the safe in the future enter the security code you have set followed by the letter “B” and turn the knob.

If the incorrect security code is entered 3 times you will have an automatic lockout for 20 seconds before you can try your code again. If the incorrect security code is entered 3 additional times there will be a 5- minute lockout before the code can be tried again.

BATTERY REPLACEMENT
This safe uses 4- AA batteries. Under normal use, batteries will last about 1 year. When the battery is low, a red light will come on warning you that the battery is low. To test the batteries, enter your security code. If the batteries are low the red light located in the middle of the top of the keypad will start to flash.

To replace the batteries, open the safe door with your security code and turn the knob. Push the batteries cover plate, which is located on the back of the door, and replace the old batteries.

YOU MUST PROGRAME YOUR SECURITY CODE AFTER YOU REPLACE THE BATTERIES. SEE STEPS 1- 3 UNDER “ENTERING YOUR SECURITY CODE”.
TROUBLE KEY
A “Trouble key” has been provided in case you forget or lose your security code. Remove the small central panel from the front of the faceplate. Insert the key and turn it counter clockwise. Then turn the knob on the door towards the right. This will manually open your safe. If you lose your key, you may purchase a replacement key by referencing the serial number located under the central panel by the lock.
MAINTENANCE FOR KEY AND ELECTRONIC SAFE
If the door of the safe starts to rub on the door frame, open the door per the instructions above. By the door hinges you will find a threaded stem. Use an Allen wrench to tighten the threaded stem. This will help realign the door and give you trouble free access to the contents of your safe.

Nov 01, 2009 | Home Security

2 Answers

Can not open nu tool sf 10 electronic digital safe


If the batteries are flat you will need a key to open your safe, the keyhole is usually under a plastic cover on the front of the door.
If the batteries were getting low a light should have warned you.
Hope this helps.

Mar 05, 2009 | Computers & Internet

2 Answers

Can't open my Protocol Home Safe - Electronic Keypad Entry


Hi I have a Sure Safe electronic key pad safe, i have owned for about 5 years we have moved house and it was placed in storage.
For the life of me i can not remember the code i have tried endless times !! is there a way to get in or do i take it to a professional.

Jan 11, 2009 | Sentry Fireproof Safe

10 Answers

Nutool SF10 electronic digital safe


Open the safe door and press the s key press the I key twice then press the red button on the inside of door near the hinges. you will hear 2 long beeps. press the s key and then the red button and you will hear a beep enter your combination up to 12 numbers then press the E key your combination is now set. Best of luck

Sep 05, 2008 | Computers & Internet

Not finding what you are looking for?
Locks & Locksmithing Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

22486 Answers

ray gallant
ray gallant

Level 3 Expert

64817 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29463 Answers

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...