Question about Locks & Locksmithing

Open Question

Mesa electronic with push button on the inside of the door combo change,how to change the combo. ? to remove prior code

Posted by on


5 Suggested Answers



Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 8 Answers

SOURCE: How do I change combo of electronic lock

Have you tried removing the cover (inside the house).. there should be a program button, which you press, enter your code, and press again....don't forget to try your code before actually locking the door...
Hope this helps

Posted on Jan 08, 2009



  • 57 Answers

SOURCE: On my 2008 Dodge Caravan,

Dodge has released some updated software for the power sliding door modules to correct this condition so the fix, is to have these modules re-programmed with the new software.

Posted on Dec 22, 2010


  • 963 Answers

SOURCE: I have a 5 button

I can't help you directly, but I will steer you to further information.
You will find a link to download the manual for your model on this page:

These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader.

Customer service can be contacted from this link:

Tech Support from this link:

Good luck!

Posted on May 13, 2011

Testimonial: "Thaks, I was able to download pdf and problem was solved.."

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to change the code on my gordon digital electronic safe

Most inexpensive electronic safes have a reset button inside. Push that and then enter the new combination and finally press the button you normally use to unlock. Confirm the new combination works before closing the door again.

Jul 04, 2014 | Safe International Digital Electronic Safe...

1 Answer

Where the black button in the safe so i can reset code

Inside the the safe you will see a button on the inside of the door.this is the re-set button..make sure the code you put in is working before closing the door.

Jun 08, 2014 | Mesa Safe MFL2014E Depository Safe

1 Answer

How to change baterry o schlage be365

To change the battery on the BE365, you need to remove the inside cover by removing the two screws (one above and one below the deadbolt knob). Be careful to tuck the wires inside the lock so that they will not be crimped when you put the cover back on.

Do you here a beep and see a flashing light? Usually if pressing the Schlage button unlocks the deadbolt, your installation was done improperly. The cam on the base plate must be vertical and the bolt must be correctly installed.

You will always be able to lock and unlock the deadbolt with the inside thumb knob.

I hope this helps.

Cindy Wells

Dec 04, 2013 | Schlage BE365-CAM BE365CAM613 Oil Rubbed...

1 Answer

Forgot mesa safe lock combo mfl 5oo

Have you changed the factory set Master Code?

May 29, 2012 | Mesa Safes MFL2014E Safe Depository Safe...

1 Answer

We want to change the the old code number and enter a new number. I would like to know how we can do this.

if you look on top of the unit, you should see a small screw - remove that screw. now you will need a small stiff wire, punch in your original code and then take the wire and push down through the hole ( this will reset wheel pack ) -- now punch in your new code and then rotate door handle to the right. now try your new code several times to make sure it took and that should be it.
now I have seen some of these units that do not have the access hole in the top -- if this is the case then you will need to access the reset button from the back of the unit -- remove the lock from the door, now look at the back plate -- you should see 6 small philip head screws -- remove those screws and remove the plate. now look at the middle of the unit - you should see a long rectangular box unit ( this is the combo pack ), now on the top of the combo pack you will see a small lever, now from the front of the unit - press in your old code, turn the unit around and with a flat blade screw driver push down that little lever,, now push in your new code,, rotate the door handle to the right ,, test your new code several times and re-install unit,, and you are done.


Jan 24, 2011 | Simplex Kaba 6200 Push Button

3 Answers

I have a safewell electronic safe and no keys and lost code ex2007127402 can i have a code to over ride and open it

hi : about the stockwell safe ex200----- 2535-EA

if the safe still has charged batteries you can deactivate any sceurity code by access through a small hole on the rear of the safe, if you can get to the rear area of the safe.. You need a long screwdriver to reach to the inside of the front of the door . Their is a reset button on the inside of the door in the lower right corner area( "B" button) on the end - not on the flat face surface of the door but on the vertical face( hing plate). You'll have to feel around and push the screwdriver sideways to push the button will beep . YAHOO- YUH DID IT !!!. Then you can reset your own code.if you need further instructions call me . icq. 33819110 or

Jul 26, 2009 | Locks & Locksmithing

1 Answer

I need to change the combo on the lock

hold the two red buttons on the inside of the door and press 4 new numbers for your pass plus # then let go of the red buttons

May 26, 2009 | Safe International Digital Electronic Safe...

2 Answers

''The protector'' gun safe I need a user manual

If it is "The Protector" from Costco, open the door and put your hand back by the top of the rear of the door in the seam. There you should feel a little button, push and hold til it beeps then enter your 4 digit code, hit "A" and release. Lock the wheel with door open and make sure your new code works.
Good luck!

Apr 01, 2009 | House Brand Sport & Outdoor - Others

1 Answer

How do I change combo of electronic lock

Have you tried removing the cover (inside the house).. there should be a program button, which you press, enter your code, and press again....don't forget to try your code before actually locking the door...
Hope this helps

Jan 07, 2009 | Weiser Lock POWERBOLT ELEC DEADBOLT

Not finding what you are looking for?
Locks & Locksmithing Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

22486 Answers

ray gallant

Level 3 Expert

66462 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30857 Answers

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides