Question about Magimix Food Processors

1 Answer

Hi my magimix 320xl won’t turn on the Handel clicks in ok so I’m not sure what the problem is it’s only been used a couple of times hope you can help me thank you Christine

Posted by on

  • Dave Porter
    Dave Porter Dec 29, 2017

    You can test the machine by removing all the blades and bowls.
    Plug in the machine and turn on at socket.
    push ON or AUTO switch, from this switch go upwards on to the top of the machine .. you will see a little hole.
    Push a pen or pencil in this hole (Keeping your hands etc away from the spindle as this will spin round)
    Bowl is replace from left to right and the handle lines up with this hole.
    Replace lid from left to right, this should push the rod down in the handle (the spring moves)
    *** VERY IMPORTANT All XL models need the pushers in to USE **
    any problem call https://www.magimix-spares.co.uk/Contact...

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Magimix Master
  • 30,451 Answers

Magimix is the best name in foods processors. They are very reliable with a direct drive motor. As I am sure you know that have a safety interlock, and this may be what is giving you the problem. The bowl has to be locked in place with the handle over the interlock button in the base. This is with the handle dead centre of the front of the machine. It won't work if you decide the handle would be better off at the side of the machine. Then the lid has to be locked in place with the lug in the slot in the top of the bowl. Only then will the machine operate.

If all that checks out, then you will need a service centre.
magimix service agent Google Search

The instruction manual is accessed from here

http://www.magimix.com/usa/page/Instructions-for-use

Posted on Dec 10, 2017

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cleaning magimix handle


Magimix Food Processor and Bad Customer Service

fussfreeflavours.com/the-tale-of-the-magimix-and-bad-customer-service/
Jan 12, 2012 - Magimix food processor review - the exorbitant cost of replacement ...time to find out how to clean the internal part of my Magimix 5200 handle.

magimix compact clean handle Questions & Answers - Fixya

www.fixya.com > Forum > Tags
Find solutions to your magimix compact clean handle question. Get free help, tips & support from top experts on magimix compact clean handle related issues.

Food processor - Magimix

www.magimix.uk.com/page/faq/Food-processor/CS-5200-XL/
Magimix UK : FAQ Frenquently asked questions - Food processor. ... direction until the locking tab engages the top of the bowl handle. ... Never exceed the quantities recommended for your food processor model in the instructions for use.

Amazon.co.uk: Customer Discussions: Food processor bowl to


Jan 01, 2016 | Magimix Food Processors

1 Answer

The extension post in my magimix 4200 is stuck on the motor shaft seems like It's welded on can anyone help


How to Change a Magimix Food processor plastic spindle.
This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.

The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.
Cover the main body with a cloth so as not to damage the look of the food processing machine.
Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle
Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.
This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.
When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.
All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Magimix Spares Parts from BBS Ltd

Apr 03, 2014 | Food Processors

1 Answer

New magimix won't start


It is most likely the way the bowl and lid are set.

Facing the machine:
the bowl locks in, with the handle to your right directly above the switches. The lid has a double tab...see underside of the top of the lid. Place the lid on tightly with both tabs locked into bowls handle. It really clicks in.

Feb 01, 2013 | Magimix 4100 Cuisine Systeme 1268 Cups...

1 Answer

Im looking for the user manual for a magimix 3100


Hi,

Try to visit THIS link, hope this will help u.


Regards;
Hasan

Dec 27, 2009 | Magimix Food Processors

2 Answers

Magimix Cusine System


Here is the generic English Magimix manual - it covers a lot of different model numbers. The good news about this manual is that it is picture-intensive instead of word-intensive. The key is that every piece of the bowl must be in the correct position, or the food processor won't tunr on. Hope it helps:
http://www.magimix.com/upload/usa/download.pdf

-Tha mp3 Doctor

Mar 12, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Where can I buy a 4mm and 6mm grater for Magimix 5100


HI! magimix-spares.co.uk seems to do quite a lot of spare parts for a range of models. Here's the web address for the 5100 model: http://www.magimix-spares.co.uk/Magimix-5100-blades-and-all-discs-/products/1060/
Not sure if they'll have the blades in stock.... Hope this helps!

Jan 31, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Magimix sytem cuisine


How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Jul 02, 2008 | Magimix 5100 Cuisine Systeme Food...

Not finding what you are looking for?
Food Processors Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30440 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...