Question about DISH Network Televison & Video

Open Question

Can't scroll up to next channel on dish network channel it keeps going to pay per view, how do I stop it.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Changing channels with XM radio

Push the button just to the right of present number 1 and this switches the setting between scan and scroll while in XM mode.

Posted on Jul 03, 2008

Ad
dunnbiker

David Dunn

  • 8546 Answers

SOURCE: how to get pay perview channels

No device would legally receive pay channels without a subscription...

The clear protective film on the DCP501 display must be removed and transferred to the inside back cover of your
DCP501 Home Theater System User Guide. The Unit Address and Serial Number found on the protective film is
required for activation of your DCP501 cable TV receiver by your cable TV service provider.

Posted on Apr 28, 2009

hsips

hsips

  • 43 Answers

SOURCE: How do I view split screen (two different channels

if it is possible (not shure) choose PIP and after that choose your source.....

Posted on Nov 09, 2009

Anonymous

  • 4 Answers

SOURCE: How do I add another TV to Dish network. I simply

What you are looking for is called a mirrored location. Its a location that mirrors either tv1 or tv2. It can be installed using simply a few splitters depending on how you want it ran. If you do it your self it will save you alot of money. If not Dish Network will charge up to $99 for a reinstall

Posted on Nov 21, 2009

hmlee390

  • 736 Answers

SOURCE: Dark horizontal line scrolling up from bottom of screen

if you are using a cable box .. then disconnect everything that is feeding signals into the tv ... then get a signal from some other source (like off the air antenna or video camera) ... if the tv still has the dark lines then you have a bad primary filter capacitor in its power supply .. if it works ok off the air and only does it when the cable box is hooked up .. then the cable box has an open primary filter capacitor . ... the dark horizontal bars you see is ripple from the rectified AC power that is not properly filtered ... if the TVs verticle scan rate is 60 hz and the full wave rectified AC amounts to 120 hz ripple then you will see two dark bars across the picture ... since the two signals are not syncronized then they will slip in phase with respect to each other .. thus the constantly moving pattern ..

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dual control noted on Dish tv screen but cannot change stations separately on both tvs


Each TV receiver has to be fed with a separate cable from the lnb. They can not be bridges or split.

Mar 09, 2015 | Dish Network/Pansat Dish Network Dish 500...

1 Answer

HOW DO YOU GET PRIME TIME ANYTIME ON ALL TV'S


Hi, I would be happy to assist you with your question. Prime Time Any Time is a feature of the Hopper that allows your local channels to be viewed using one tuner. It also allows for the recording of all four major networks ABC, CBS, NBC, & FOX during prime time hours using one tuner. If one TV is set to a local channel than you can press the Red Hot Key on any DISH Remote and it will display the TV Viewing Screen and all the locals will be listed. You can scroll to and select any of the locals listed and it will play on that TV. If you are still having issues and need additional assistance, please feel free to PM DISH directly on facebook here: http://goo.gl/dgbNL Thank you!

Mary Catherine Brady
Team Lead- Social Media
DISH, L.L.C.
Sunday-Wednesday 2:45pm-11:15pm, Thursday 1:30pm-10:00pm (MST)

Feb 01, 2013 | DISH Network Hopper Whole-Home HD DVR

1 Answer

We have Dish Network VIP722 on only one tv at this time. When recordng PPV, we are unable to change channels without getting message that recording will stop. Menu>Preferences>Record...


We would be happy to help you with that. The first thing we would recommend checking is if the "Record Plus" feature is "Enabled", this can be found to the left of the "Record Preferences" on the "Record Plus" screen. The other thing we would recommend is to ensure that the tuner that you are viewing is for the TV1. You can swap between the tuners by pressing "Input" button while in SAT mode.

This should get things set up the way you want it. Thanks for choosing DISH Network!


Phillip Chang
DISH Network Customer Service Representative

Mar 05, 2011 | DISH Network ViP722 DTV Receiver /...

1 Answer

I am unable to get pay per view from Dish Network DVR due to HDCP compatability on a Samsung UN46C6300.


Plug the Prpl av jack in the prpl av jack receptical on the back of the TV. That should fixya.

Feb 23, 2011 | Samsung UN46C6300 TV

1 Answer

Only recieve HD programs on my Vip 612 receiver. I want to receive non HD channels as well


Hello! The guide might be set to only HD. You will find this out by going into the guide. At the top Left of your guide, you will see that it says left to the right of the DISH Network logo. If it says ALL HD, then just press the GUIDE button again, until the list says ALL CHAN or ALL SUB. This way, you can view not only HD channels, but SD channels as well! Hope this helps!!!!

Becki Barned
DISH Network Customer Service

Jan 15, 2011 | DISH Network ViP 612

1 Answer

Remote guide is locked on pay per view channels (#600's)


call your satellite or cable provider, they'll walk you thru on how to fix it

Jun 11, 2010 | Logitech Harmony 520 LCD Remote Control

1 Answer

Had dish network update - can't view vcr tapes


the output of the vcr...
what is it physically wired to?

Dec 04, 2008 | Sanyo VWM-950 VHS VCR

1 Answer

Picture problems


if it's Narrow on both sides, height and width vary with scenes
try replacing C4407, CR4403

Jan 02, 2008 | RCA P46921 46" Rear Projection Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...