Question about Locks & Locksmithing

1 Answer

Trying to reprogram the kaba lock and its not working

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Locks & Lock... Master
  • 1,533 Answers

Posted on Mar 29, 2019

Ad

3 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Coaltowner

  • 963 Answers

SOURCE: Need to know how to reprogram the code on a

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS


1.) ENSURE THE DOOR IS OPEN.


2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.


3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.


4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.


5.) PRESS IN THE EXISTING COMBINATION FIRMLY.


6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.


7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.


8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.


9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.


10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.


11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.


12.) RELEASE THE DOOR KNOB.


13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.


14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)


REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Good Luck!

Posted on Mar 06, 2011

Coaltowner

  • 963 Answers

SOURCE: kaba lock won't open with code

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Posted on Aug 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kaba lock won't open with code


Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Aug 18, 2012 | Simplex Kaba Ilco Unican 1011 keyless...

1 Answer

I was changing the combination on my 1000 series as per instructions and when I reprogramed the new combination it worked the first time will not unlock it anymore. What can I do. Thanks


I suggest trying this:
Go to the Literature Grid:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13
and hover your mouse over PDF under the TIPS (rightmost) column for the L1000
Then click on the lower choice that pops up: "How to Reset a Lost or Unknown combination....."
Yow will then download the file with the instructions that you need.This is a PDF file; if it won't open for you, you need to download and install Adobe Reader (it's free):
http://get.adobe.com/reader/

If you are not successful, please contact the Tech Suport for Kaba-Ilco:

Technical Support (Simplex, E-Plex, PowerLever, 4000 Series, Solitaire 850L, Solitaire 850/950)
1-800-849-8324 (option 3, and then option 6)


I hope this helped. Good luck!

Jul 16, 2011 | Simplex Kaba Ilco Unican L1000 keyless...

1 Answer

I changed the batteries then initialized it and it won't work. I can access it with the emergency card. I tried to reprogram it and it always says can't establish connection with the lock. It has...


The Unican 1000 locksets are pushbutton locks and do not use a card for access. I think you may not have referenced the proper model that you are having problems with.

I'm including a link to Kaba Ilco products page where you can research your model of lock:

http://www.kaba-ilco.com/access_control/products/eplex.aspx?id=6

You may find that your lock is under the E-Plex series, which use card access.

Also to be found on that page is a link to "Literature and Support" which you can expand to take you to the proper information grid for your model of lock.

The Literature Grid contains links to PDF files which have headings for the Manual, Parts List, Instructions Charts, etc. The Instructions Charts may be of most interest to you because they contain troubleshooting information.

In order to view these PDF files,, you will need Adobe Reader installed on your computer. There is a link on the Grid page to Adobe Reader if you don't already have it installed.

Near the top of the Literature Grid page you will find a link called "Contact Us", and under that link you will find links to Customer Service and Support and Technical Support which will allow you further assistance by Kaba Ilco support, either by email or by calling them toll-free.

I hope this information helps. Good luck!

May 20, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

How to extend or reprogram kaba machine expired date for authorised master key?


I can't help you directly, but I will steer you to further information.
You will find a link to download the manual for your model on this page:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader.

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Good luck!

May 11, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

My kaba gun lock will not open i put new batteries in it i have tried 3 different one but nothing will work. i try to punch in my code and it just peeps at me and i can not get into m gun safe.


I don't have a direct answer, but Kaba customer service can be reached here:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Good luck!

Mar 01, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

When trying to reprogram a room key for entry, the initialization process works, but after you initialize and a green button appears, we connect the kaba to the door, but when we slide the card it says...


Contact Kaba Ilco directly with your problem.

Technical Service Dept.
For further information at (800) 849-8324
or (336) 725-1331.

They are located in North Carolina, so the best time to call is probably during east coast business hours.

Good luck--and please provide feedback if this helps!

Jan 22, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

I changed my combination and dont know what i set it to


If you forgot the combo you will need to reprogram it. If you can not get in to open the door to reprogram you can email llco at info@lilocksmith.com for an override code.

Good Luck

Dec 28, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

How do we reset the door code


From this page you can download the manual necessary to reprogram your 2000 series:

http://www.kaba-ilco.com/access_control/literature/literature_grid_eplex.aspx?id=14&obj=2000

You have two choices when you mouse over "manual" for the 2000. Each is a PDF file: you can download Adobe Reader from the link on the same page.

Dec 28, 2010 | Simplex Kaba E-Plex 2000 series Keyless...

1 Answer

I have forgotten the code for my code lock which is on my bedroom door.


Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

You'll need Adobe Reader installed, as these are PDF files. The manuals show installation and reprogramming instructions.

You can also research other models of locks from this page.

Good luck!

Dec 09, 2010 | Simplex Kaba Ilco Unican 1011 keyless...

Not finding what you are looking for?
Locks & Locksmithing Logo

Related Topics:

707 people viewed this question

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

john h

Level 3 Expert

22486 Answers

ray gallant

Level 3 Expert

66462 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30857 Answers

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...