Question about Furniture
Old hand control worked, but was falling apart, loose wires etc so replaced it - meanwhile it's stuck in the down position and can't be used.
The control may be the wrong model for your chair or possibly not connected firmly underneath.
Posted on Jan 13, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
where is the overload protection circuit for power seat of nissan altima 2001 , the seat does not move back and front let me know if i could do the seat move
Posted on Feb 10, 2009
I just bought a 2005 Nissan Altima that had the same problem. The motor was fine. I opened the switch and found that a trace on the small circuit board was cut/missing. I soldered it on the spot and it solved the problem. You can access the switch by carefully prying off the switch buttons, then the plate. There are two screws that must be removed so that you can pull the switch assembly out of the seat.
Posted on Aug 02, 2009
Tips for a great answer:
Jan 24, 2016 | Ekornes Stressless Recliner Chair Personal...
Aug 06, 2015 | Furniture
Mar 30, 2014 | Furniture
Dec 03, 2013 | Home Meridian Comfort Lift Recliner
Nov 17, 2013 | Golden Technologies Electric Power Recline...
Feb 03, 2013 | Home Meridian Comfort Lift Recliner
Jan 15, 2013 | Home Meridian Comfort Lift Recliner
If it is fully reclining you need to leave a little bit more than the height of the chair's back. For example: if the back height is 19", then you need to leave about 20" between the chair and the wall behind it.
May 29, 2012 | Furniture
Nov 23, 2010 | Everest & Jennings 18" Metro Ic3...
Dec 23, 2009 | Health & Beauty
Nov 17, 2019 | Furniture
74 people viewed this question
Usually answered in minutes!