Question about Hobart Food Mixers

1 Answer

I can't get the main shaft out of an A200 Hobart Mixer to service the lower bearing. Any advice?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 250 Answers

Honestly, get someone in that knows Hobart mixers. The a200 is an amazing machine, but you will need to strip the entire gearbox apart to get to the bearings. Take this from someone who works for Hobart :)

Posted on Mar 03, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: A200 Mixer/Medalist L120 Mixer by Hobart

Where is it leaking grease from?Im a hobart tech and service these mixers.When i go into work i will get you the part # for the grease.You would then have to contact your local hobart branch,tell them the part # and pick up the grease.

Posted on Feb 25, 2008

Anonymous

  • 2 Answers

SOURCE: Hobart A200 Mixer not working

Sundance,
Please visit the corp website www.hobartcorp.com and click on the "Sign In" link in the upper right hand corner. You'll need to complete a brief registration form, but then you'll land in the Hobart Resource Center.

Hobart no longer manufactures the A200 mixer - but you can review and download a user manual and a parts catalog from the Resource Center on your mixer. That should help you understand the parts need.

We do sell replacement parts direct to end users, just visit our service website at www.hobartservice.com - and click on the "Locate on Office" link. You'll be able to contact your local Service branch to purchase a replacement part OR to have them take a look at the unit and provide a quote on fixing it.

If you have additional questions on Hobart products - please contact me at sherri.wilmoth@hobartcorp.com .

Thanks!
SHerri

Posted on Oct 14, 2008

Anonymous

  • 1 Answer

SOURCE: Manual for Hobart Mixer A200

You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

Posted on Jan 17, 2009

paultech8226

  • 109 Answers

SOURCE: I have oil coming from the front of a hobart a200

If you have oil leaking from the attachment hub, the transmission grease has liquified. The transmission will need to be opened so the old lubricant can be removed, by scooping it out. There aren't any seals in the attachment hub, just two torrington needle bearings. The helical gears thrust the pinion gear onto a thrust bearing in the hub to create a seal. The hub has a return hole in it's casting for excess lube to return internally. It's possible the return hole is restricted. On the other hand, if the machine has been filled with oil, it will probably leak like a siv.
The new lube should be 35 OZ of mobil XPH 222,
Hobart part number is 103881-47 for 32OZ.

Posted on Aug 08, 2009

Anonymous

  • 5 Answers

SOURCE: Hobart A200 mixer 1st speed doesn't work 2nd

Could be that a gear is missing (broken) on the shaft that works the 1st gear. Check out the schematic at

http://www.food-equipment.com/parts_Hobart_mixers.htm

It could be the gear HM2-748

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I've broken the agitator shaft pin on my Hobart A200T. I can find replacement pins online, but the local Hobart tech. is MIA. How do you remove the pin? How do you secure the replacement in the...


Drive it out with a punch and hammer. It's best to take the planetary off the machine so you can support the shaft. If not it puts a lot of unnecessary stress on the bearings and other parts.

Jul 08, 2011 | Hobart A200 Stand Mixer

1 Answer

Oil leak


instead of putting a gasket on tell him to take out all of the old grease out that is what has broken down and turning into oil causing a leak and if he can repace the seal around the agitator shaft replace the old grease with a high temp bearing grease or a good quality lithium grease

May 25, 2010 | Hobart A200 Stand Mixer

1 Answer

How do I remove the hook from my Hobart mixer?


With the bowl lowered, and off, hold the hook, push up and rotate counter clockwise as looking from the top. If it is siezed onto the beater shaft, try digging out the buildup, and using penetrating fluid to loosed the blockage.

Jul 08, 2009 | Hobart A200 Stand Mixer

1 Answer

Looking 4 used parts A200


The safety cage kit is not cheap and you may not find a used cage. Why would you want to install used gears? They would have been removed from a mixer that has failed for some reason. Usually broken gears or shafts.

Mar 06, 2009 | Hobart A200 Stand Mixer

2 Answers

A200-T Hobart Mixer 1st speed have no torque


Check the spring pin that locks the motor shaft to the main drive gear in the gear box. You should be able to turn the motor from the back at the cooling fins and watch the shaft spin in the gear, that is if the pin is sheared. That is a common problem. if you plan on keeping this machine for a while, i recomend that you spend a little more on a quality spring pin,

mechanictony-
good luck.

Jan 17, 2009 | Hobart A200 Stand Mixer

1 Answer

Hobart A200 mixer motor worm gear


sometimes you read of other problems and solutions and it puts you at the edge of your seat. in this case of changing the worm gear on the A200F was cake. when you drop the lower end (3/4 acorn and jam nut), pull out yoke (speed select handle) the center transmision shaft and gears pull right out.worm gear easy to change at this point. if you can change a motor bearing, then you can do this job. Note: change seals and bearings as needed,check all gears,keys and spacers for wear and if you go the mile take gears off drive gears, these are the 2 smaller trans shafts put in lath if you have accsess to one if not roll shafts on flat surface to see that shafts have no bends in them. Also remember when you put the bottom back do not over tighten the jam nut,hold and lock acorn nut, should spin free and have about .016 to .030 movement up or down. Lay out all part on cardboard the way they came out. should go back together easy.

Harry Ooooooooooo

Jan 09, 2009 | Hobart A200 Stand Mixer

1 Answer

Old man needs help with hobart 30 q mixer


it has to be torn apart to change grease and it is grease do not put oil in it. but it all is done from top under cover is the top of transmision the round cover comes of and all shafts need to be removed and I sugest a new main shaft seal and hub seal while your at it.

Nov 29, 2008 | Hobart A200 Stand Mixer

7 Answers

Manual for Hobart Mixer A200


You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

May 05, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart A200


amy, depending on how old your mixer is there are 2 types of clutches for 1st gear.these could be your problems--a key is sheared on the shaft--shaft/gear is broken.the bottom part of the mixer where you put on the attachements is called the planetary,does it look like it has moved down?you could tell if the dough hook,wire whip,ect,ect is hitting the bottom of the bowl.if this is the case its just simply tightening the 2 nuts next to the beater shaft.if this is not the case you would have to dissasemble the transmission.let me know.

Jan 11, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1363 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...