Question about Denon AVR-2807 Receiver

2 Answers

How do you reboot the Denon AVR-2807 to factory settings

I need to restore my AVR-2807 to factory settings, how do I do this?

Posted by on

  • 1 more comment 
  • myoho49 Jun 20, 2008

    need to reset Denon 2307 CI to factory settings. Standby blinking, but not over heating and speaker connections okay.

  • Anonymous Dec 11, 2008

    which buttons are "night" and "pure direct"?

  • donjoquaid Feb 13, 2009

    i try to test speakers and its stuck on one speaker and caution comes on ??/

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To reboot, turn receiver off by the small on/off button, not the big standby button. While off press the night and pure direct button at the same time and keep holding them with your right hand while pressing the small on/off button with your left. You will see your receiver menu flash. When you see it flash let go of the night and pure direct button and the receiver will reset it self to the radio station 87.50. The receiver's microprocessor has now been set back to factory. Enjoy this info is straight from Denon's Tech support. I had to do this on mine

Posted on Dec 11, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Denon Receiver Model #AVR-2805/985 receiver volumes cuts out at certain times its not a heating problem or playing to loud

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Resetting my default sttings


1. Switch of the unit using <Power>
2. Hold the following <Pure Direct> and <Night>, and press <Power>
3. Check that the entire display is blinking with an interval of about 1 second and release the butttons.

This is on page 42 of the manual available at retrevo.com

May 23, 2010 | Denon AVR-2807 Receiver

1 Answer

My denon avr-2807 sound is studdering as the


sounds like a loose cable to me probably component. trace and replace.

Chris B
PHTBA

Feb 18, 2010 | Denon AVR-2807 Receiver

1 Answer

Want to put set of outside polk speakers to Denon avr 2807


Do you have outputs for both A and B speakers? If so you can easily hook the outside speakers to the B outputs.

Jun 16, 2009 | Denon AVR-2807 Receiver

1 Answer

Condition on HDMI input when Denon AVR-2807 switched off


hello if you know this spitter conduct voltage and its feed from main device and when you connect another it send it ground you have to do this chech with a voltmeter in the hdmi splitter output is not dc present if so change it cause is not blocking dc current saludos

Dec 04, 2008 | Denon AVR-2807 Receiver

1 Answer

Operating my ipod docking station


Absolutely!
Keyword(Read the instruction and follow it step-by-step.) Well,if you do,you wouldn't be asking for help,cause you want a 50+ pages Denon manual instruction to be concise to few paragraphs so you could move on with your life-:o)
Okay.only this time!
Denon ipod docking station comes with a power plug and a set of cable which you need to connect behind the Denon AVR-2807 receiver which is under an INPUT LABEL for IPOD only(not going to give it away,you will find it!)
Now,of course you could use HDMI......but,the quickest way to view your video(on screen menu) will be using a composite(RCA) video cable to connect from the Video output(yellow color) from the receiver to the TV composite video input.Turn on your IPOD,and you are ready to see the on screen manual.
Hey,this is just a lazy way to start you off if tomorrow night you have a date;otherwise,set it up properly by using the instruction!
Cheers,
solutiondoct

Oct 18, 2008 | Denon AVR-2807 Receiver

1 Answer

Loss of sound on the Denon AVR 2807 a/v surround receiver when I turn on and off lights in my house


Finally the problem was with the HDMI cable. When I pushed it in on the TV set the problem disappeared. It seems the connections must be quite firm on the HDMI cables otherwise anything may interfere to the sound.

Jan 06, 2008 | Denon AVR-2807 Receiver

2 Answers

AVR 2807 shuts off at high volumes


You may have leaky Caps in the power supply or else dry joints on the amplifier section. Faulty speakers or overdriving of the system may result in the amp going into protection. Good Luck, Jus004

Jan 05, 2008 | Denon AVR-2807 Receiver

Not finding what you are looking for?
Denon AVR-2807 Receiver Logo

15,387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...