Question about Hobart Food Mixers

Open Question

CHANGING THE BELTS ON A HOBART HSL 220-1 MIXER. ON THE BOTTOM OF THE MIXER AND ABOUT SETTING THE TENSION

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: Servicing Hobart A-200

the bondo is on the top cover, most likely covering the screw holes up. I've scrapped the paint off and see bondo on it, I know it also has been repainted a few times as well. It just strikes me odd to find this. thanks.

Posted on Feb 01, 2008

Ad
bigg t

anthony james

  • 640 Answers

SOURCE: hobart 20 quart mixer

Hi im a service tech for hobart.I cant give service manuals out because i could lose my job but i can step you thru your problem with the mixer,let me know.

Posted on Aug 24, 2008

Cuisinexpert

Cuisinexpert

  • 61 Answers

SOURCE: oil leaking from hobart d300 mixer

DEFINITELY contact the manufacturer (Hobart) on that one. Sounds like you're having some sort of an internal problem with it (something might be cracked), and in this situation, the best way to go is to contact the manufacturer rather than try to repair it yourself. If you're still under warranty, and you try to open the machine up to fix it yourself, you could wind up VOIDING the warranty, and if you're out of warranty, most repair places won't touch a machine that you've messed with already--too much of a liability.

Just give Hobart a call, and they should be able to help you (if you're in warranty, sometimes even for free!). Their phone number (according to their website, www.hobartcorp.com ) is 1-888-4HOBART (1-888-446-2278)


Good luck! :)

Posted on Aug 27, 2009

Anonymous

  • 50 Answers

SOURCE: mixer catching bottom of bowl model hobart a120

There are several possible causes:1. The blades of the beater/s may be distorted (bent) 2. The beaters are in the wrong way round 3. The bottom tray is not seated down properly - there may be something in the central hole 4. The bowl may be damaged

Posted on Sep 22, 2009

monomoy

  • 110 Answers

SOURCE: need circuit card for Hobart Mixer Model HL600C

ge is a recitml# and repost, there are 2 p.c.b.for that mixer 1 is a recipe timer for ml#134317,part#916560, the other is a standard timer part#916557, can be bought @ any hobart location, one would assume that the c on the model # stands for corrections. hope this helps, dont forget to vote, monomoy

Posted on Jan 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I rewire a Hobart VCM-25 Mixer/Cutter 460v to run on 220/240v?


There is likely a nameplate with a wiring diagram inside. Without being familiar with the specific model, I can't tell you where. If you can find it, it will show both 460 and 230 volt configurations. Regardless, you will find inside the wiring box (where the conduit comes into the mixer) there are four wires corresponding to two windings - for 460 volts, the windings are wired in series. For 230 volts, they should be wired in parallel.

Jul 16, 2014 | Hobart Food Mixers

1 Answer

HELO I recently purchase a 460V H600T hobart mixer 2.5 AMP/ 3 PHASE but unfortunatly our bakery only provides 110V or 220V what are my option??


The machine can be internally rewired for 220 3 phase. Call your local Hobart office and have them come out and take care of it.

Sep 05, 2011 | Hobart H600 Stand Mixer

1 Answer

H-600 Mixer transmission has a spring on the top of the worm gear shaft that is adjustable. What is the procedure for proper adjustment of the tension/preload on this spring?


If the shaft has two grooves above the spring. the retaining ring should be in the bottom groove. The nut on the bottom of that shaft should be tightened until it stops turning. If you do not tighten the bottom nut all the way you will destroy the brass gear the first time you run the machine.

May 24, 2010 | Hobart H600 Stand Mixer

1 Answer

Need to change belts on mixer never done this before?


THE BELTS ARE NOT HARD TO CHANGE . DON'T KNOW HOW OLD THE UNIT IS BUT NEVER THE LESS THE BELTS ANE EASY TO CHANGE

Sep 27, 2009 | Hobart Food Mixers

1 Answer

95 year old hobart mixer: two pole single throw switch


Im a tech for hobart and have seen old mixers but not that old.Hobart wont have parts but you could goto an electrical supply place,take the switch and ask them for something universal.

Dec 16, 2008 | Hobart HL600 Legacy Stand Mixer

1 Answer

Mystery part to a 1950 Hobart N50 Mixer; serial number 997185


Go to www.hobartservice.com, register, then go to select "food machines" in the Product Group, then "mixers"and look for the Discontinued Products, then find the N-50 mixer drawings, they are all there, even the old ones. Look through the "exploded" drawings for your extra parts. It seems to me that the tech who put this together should know if they belong to this mixer or not. Does he work for Hobart? Or is he a repair person who states that he knows how to repair Hobart products. If he does'n't work for Hobart, these parts may have been on his bench BEFORE he looked at your mixer. A true Hobart Tech has access to specs on ALL models and the ability to access the Service Manuals. If you find this solution helpfull, please rate it. ricardok45

Aug 20, 2008 | Hobart N50 Stand Mixer

4 Answers

NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER


I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.

Feb 02, 2008 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...