Question about AT&T Lands Phones

1 Answer

I purchased a home phone AT&T EL52303. Batteries are in the unit lights up. Showing no line and no dial tone.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • AT&T Master
  • 54,841 Answers

Plug in a "test" telephone. If no dial tone, the problem is outside.

Posted on Jun 06, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2 Answers

SOURCE: no dial tone on handsets

Hey.. Did you check to see if the phone is registered correctly ???

Posted on Jun 07, 2007

Anonymous

SOURCE: Phone line/phone jack problem

The wiring on the jacks is set up for a 2 line phone.

If you take the jacks apart, you will see either:
A) red, green, and black, yellow
B)white blue/blue white and white orange/orange white

You need to swap the pairs.
If there are red/green/black/yellow wires. remove the yellow/black and move them to where the red/greens are. Then put the red/green wires, where the yellow/black used to be.

OR, you need to swap the orange and the blue wires.

Posted on Dec 22, 2007

Anonymous

  • 24 Answers

SOURCE: No Dial Tone

You need to check your modem setting under control panel, there is a "wait for dialtone" option that you need to untick. Please let me know if this fixes the problem.

Posted on May 27, 2009

Anonymous

  • 113 Answers

SOURCE: Panasonic KX-T7433

These phones are digital proprietary telephones which means that they only work on panasonic telephone systems and not on normal analog lines. If you have a panasonic system the correct way is to plug the line into the " To Main Unit ", the handset into " Handset/Headset" and a normal analog phone into " To Tel ". If the wiring on the line jack was not done digitally the phone will also not work

Posted on Mar 19, 2010

Testimonial: "Thanks Heaps Buddy"

gundalf

  • 37 Answers

SOURCE: My phone says line in use and no dial tone

I also, but my dsl is still functional...

Posted on Oct 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just purchased a house phone style # EL52303. I set them up and no line and no dial tone either.Help!!


Phone outlet not connected?

Battery not connected?.

Cordless phone power outlet not live?

Check the instruction manual:

https://www.brandsmartusa.com/pdfs/manuals/20182728.pdf

Jun 05, 2018 | Lands Phones

1 Answer

Have out of range of base message


does the base unit have a dial tone . if no then you need to contact your land line phone company of course assuming you have it plugged into a phone line coming into the home

Dec 22, 2015 | Vtech Lands Phones

1 Answer

I cant get a dial tone to call out says line in use but I have checked and unplugged all 4 lines still no dial tone everything else is good no dial tone


Try:
Turn off power for the base.
Turn off phone and take out batteries.
Wait few seconds then put batteries back.
Will help if you unplug and plug the cables.

Jul 14, 2015 | Lands Phones

1 Answer

My phone doesn't have dial tone. Each time I dial a number and try to call,it wont work. I call my phone but it wont ring. I need help on this. What happen to the phone? Or what should I do?


If you have another phone connect it to the wall outlet to see if you get a dial tone. This will indicate if your base unit is faulty.
Check the power adapter to the base unit, make sure it is getting mains power.
If the base unit has dual phone lines and if line 1 is only connected and the line 2 has beed selected then you cannot get a dial tone. In the chase press the line 1 to get a dial tone.
If your base unit has only one line then check the phone line at the wall socket make sure it is plugged in tight, also check the the connection at the base unit.
If this does not work then ring the phone company and get the to test your phone line, you may have a faulty line to your home.

Feb 03, 2012 | AT&T E2116 2.4 GHz Cordless Phone

1 Answer

How do I reset my phone to reset to get back in range it says out of range anyone have instructions ?


Unfortunately, I do not have a manual for the GH-4102. However, most cordless phones get out of range messages at a few points: low handset battery, no power at the base or no dial tone at the base. Other possibilities are the phone base and handset lost the registration or one or the other isn't transmitting/receiving properly.

Things to try: unlpug the base power (from both the wall outlet and the phone) and phone line cord and remove the battery from each handset. Wait a few minutes and then reconnect the batteries and plug in the power and data connections. (Check when you unplug the base power adapter if it was warm; that indicates the unit was at least getting power at that point.) Recharge the handset batteries and then re-register the handsets, if needed.
Consider replacing the handset batteries if they are more than a year old (this includes the time that the phone may have been on a shelf after manufacturing). Try a new phone data cable (RJ11).

Next test your phone line and make sure that you have a dial tone. I like to use an old corded phone with the new phone cord for testing. If there is no dial tone, test the line at another jack. If there is still no dial tone, find your incoming phone line and open the service box. If you have a relatively new service, you will be able to plug your test phone into the service box and test there. If you can't test the line or there is no dial tone at the service box, contact your telephone company. They will test and fix outside problems for free.

If the problem is inside, look at all accessible wiring and make sure that the lines aren't damaged. If only one jack is bad, open the faceplate and fix any loose wires. There are two types of connections. The first holds the conductors under screws and the wire must be stripped back and secured. The other uses a keystone jack. The conductor wires are not stripped but a special tool punches the wires into place. You can find the punch-down tool at many hardware/home improvement stores in the wiring section. See http://www.lanshack.com/wire_phone_jack.aspx for a picture of the correct wiring for the jack.

If your phone line has a dial tone and the above fixes didn't work, contact the company and get the phone repaired if it is under warranty (usually 1 year). If it is out of warranty, then decide if it is worth repairing or if you should replace the unit.

I hope this helps.

Cindy Wells

Jan 09, 2012 | Southwestern Bell GH-4102 Twin Cordless...

1 Answer

Line lights 1 & 2 on. No dial tone


The lights are controlled by 2-AA batteries per line (they are not necessary to just make calls) - The dial tone, I don't know, but you have Line 1 & 2 as one Plug, plus Line 2 and there are 2 Data plugs all in the back.. so...you know

Mar 09, 2011 | AT&T 982 Corded Phone

1 Answer

The phone lights up when put to charge also the red light on the base,, but when the phone line is connected it wont work ..What do u think is the problem?


The battery in the handset could be bad . First I would test that the base unit is recieving dial tone by pressing speaker button on base unit. If there is dial tone then problem is in handset or in base unit communication to handset. Try resetting power to base unit. Check manual for any re-initialization procedure. If the base unit is not receiving dial tone then I would test that the phone line is delivering dial tone to the base unit by connecting a known good phone to the line cord. If the dial tone is not present , problem could be in line cord from outlet, outlet, building wiring, or service provider.

Dec 08, 2010 | Uniden Cordless Phone

4 Answers

Dial Tone but won't call out.


I just had the same problem. Try unplugging the plug from the electrical outlet for the home(base) unit and plugging back in. Fixed my problem right away.

Jul 26, 2008 | Uniden Cordless Phone

3 Answers

Home phone giving a high pitched dial tone .


This normally happens when the exchange junction box nearby has some problem... do call the line man to clear the problem

Feb 18, 2008 | Uniden Cordless Phone

1 Answer

There was a power surge, and now my phone is stuck on pulse dialing, how do I get it back to tone? I can use the star key to bypass the pulse and put the phone on tone, but it only works one call at a...


You’ll need either a 6-button or a 24-button set SPIRIT CS administration.

First the control unit ADMIN switch must be ON, the administration overlay must be in place on station 10, and the set must be plugged into control unit jack 10 (call processing is interrupted only at station 10).

After moving the admin switch, and before dialing Ftr 7 -
From station 10 press intercom,
Press speaker,
Dial *0,
Dial 1,
Then Press Ftr 7.

Each line indicator light will show the current dialing type for that line. If the light is OFF, that line is set for touch tone dialing. If the light is ON, the line is set for dial pulse
dialing.

To change the dialing type for a line or lines, press the line button(s) and dial the
appropriate digit from the table below. You may press more than one line button to make the change on more than one line. If you enter a digit without first pressing a line button you will hear the error tone.

Be sure to turn the admin switch back off when you’re finished.

Mar 07, 2007 | AT&T Spirit 6-Button Stard Misty Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Lands Phones Experts

Cindy Wells

Level 3 Expert

6048 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you an AT&T Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...