Question about Asko Washing Machines

Open Question

I have an ASKO Washer 6761 and am having trouble getting the pin trap to go back in. It leaks water when washing, help!

Posted by on

Ad

5 Suggested Answers

Anonymous

  • 3 Answers

SOURCE: Asko W620 washing machine not spinning

Sounds like the motor brushes need to be cleaned or replaced. Take the back off the washer, remove the motor and gently scrape the excess carbon or debris off the brushes with a pocket knife. I did this and it ran well for about 50 loads before building back up. I am ordering new brushes now because when I checked the brushes last week they were obviously worn more than 4 weeks ago.

Posted on Jan 21, 2008

Ad
Timon90

Timon Gr?nlund

  • 126 Answers

SOURCE: Asko Washer leak

Remove the bacpanel, and locate the leak. Be careful for moving parts, and electricity.
It may leak from the pump or from a hose or so.

Posted on Jan 23, 2008

Ad

Anonymous

  • 14 Answers

SOURCE: Asko Front Load Washer major water overflow from powder dispenser

You may have the hose between the dispenser and bowl blocked

Posted on Feb 15, 2008

Krazytech

Franklin Ouchida

  • 725 Answers

SOURCE: I have an asko wm200 washing machine. I have an F3

open the little door at the bottom or remove the toe panel... then there is a coin trap... that will let you remove the water there is a black hose with a plug on the end remove plug and drain the water...by turning it and pulling it you can remove the coin trap and you my be able to remove somthing stuck in it... also there is a red string you can pull it and release the door


Hope it helps if NOT let me know more about your problem... and I will help

Posted on Sep 26, 2009

seth adams

  • 1531 Answers

SOURCE: Water doesn't drain

you could have a bad drain pump.
have you checked the hoses that come from the bottom of the tub to the drain pump for anything that might be stuck in there,also check the hose that comes off the drain pump to the wall and look for an obstruction.

Posted on Jan 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Water doesn't drain


you could have a bad drain pump.
have you checked the hoses that come from the bottom of the tub to the drain pump for anything that might be stuck in there,also check the hose that comes off the drain pump to the wall and look for an obstruction.

Jan 31, 2010 | Asko W6021 Front Load Washer

1 Answer

I have an asko wm200 washing machine. I have an F3 error, which is stopping me from opening the washer. The washer is also still full of water. Just need to know how to get the door to open and the water...


open the little door at the bottom or remove the toe panel... then there is a coin trap... that will let you remove the water there is a black hose with a plug on the end remove plug and drain the water...by turning it and pulling it you can remove the coin trap and you my be able to remove somthing stuck in it... also there is a red string you can pull it and release the door


Hope it helps if NOT let me know more about your problem... and I will help

Jul 08, 2009 | Asko W6761 Front Load Washer

1 Answer

Not only is my asko washing machine leaking, the code "F3" flashes continuously, and my clothes are locked inside. What does "F3" mean? and how do I get the door to unlock?


F3 is a blocked drain...open coin trap remove blockage... also in the trap door is a red release string.. remove screw and pull it will release the door...


Hope it helps if NOT let me know more about your problem... and I will help

Jun 30, 2009 | Asko W6441 Front Load Washer

1 Answer

The pin trap will not screw back into the washer


Check you have not pushed anything into the pump, also clear any limescsle away

Feb 02, 2018 | Asko W6021 Front Load Washer

1 Answer

Water constantly in pin trap


I had this problem and found out there was something stuck in the drain hose.  It also made my clothes smell sour.  Unhook your drain hose stretch it out straight, run water through and maybe snake it if need be.

Jun 29, 2008 | Asko W6021 Front Load Washer

1 Answer

W620 Drain Hose Goes Where??


The little black hose in the pin trap compartment gets hooked onto the round pin on the door of the pin trap access, that little hose is a bypass hose from the pump inlet

hope this helped

Apr 18, 2008 | Asko W620

3 Answers

Asko W620 washing machine not spinning


Sounds like the motor brushes need to be cleaned or replaced. Take the back off the washer, remove the motor and gently scrape the excess carbon or debris off the brushes with a pocket knife. I did this and it ran well for about 50 loads before building back up. I am ordering new brushes now because when I checked the brushes last week they were obviously worn more than 4 weeks ago.

Dec 11, 2007 | Asko W620

1 Answer

Fault Indication - "Over Flow"


Does manual say to clear drain by running high temp water to clear drain; i dont think so. Now you have to unscrew the back to see where the leak comes from - by pouring plain water into the machine (where u put clothes). Unplug all electrical connections, ie disconnect the machine from the wall socket. Pl post back

Apr 18, 2007 | Asko W6761 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asko Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

ROB

Level 3 Expert

858 Answers

Lollo Pop

Level 2 Expert

134 Answers

Are you an Asko Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...