Question about Hobart Food Mixers

3 Answers

Hi, I recently bought an old A200 Hobart mixer from a catering auction...plugged it in & guess what?? Completely dead. Ideas of what to check first? Tom

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hobart Master
  • 22,486 Answers

Purchase a meter and start from plug and end at motor

Posted on Jul 09, 2018

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hobart Master
  • 6,026 Answers

Power lead/wiring first then the switch then the motor.

Posted on Jul 09, 2018

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hobart Master
  • 85,222 Answers

The switch first then the motor.

Posted on Jul 09, 2018

Testimonial: "Thanks - the switch is good. Can I bypass the timer, and if so how?"

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

bigg t

anthony james

  • 640 Answers

SOURCE: A200 Mixer/Medalist L120 Mixer by Hobart

Where is it leaking grease from?Im a hobart tech and service these mixers.When i go into work i will get you the part # for the grease.You would then have to contact your local hobart branch,tell them the part # and pick up the grease.

Posted on Feb 25, 2008

Capt Rick

  • 81 Answers

SOURCE: NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER

I have a wiring diagram for the standard A-200. If you send me your e-mail to me I will send it to you. capt_rick1912@yahoo.com

Posted on May 31, 2008

Anonymous

  • 1 Answer

SOURCE: Manual for Hobart Mixer A200

You can go to hobartcorp.com and register for free then you can print or download a parts
manual to help you to do repair. Hobart provide service manual to their technician only.

Posted on Jan 17, 2009

paultech8226

  • 109 Answers

SOURCE: I have oil coming from the front of a hobart a200

If you have oil leaking from the attachment hub, the transmission grease has liquified. The transmission will need to be opened so the old lubricant can be removed, by scooping it out. There aren't any seals in the attachment hub, just two torrington needle bearings. The helical gears thrust the pinion gear onto a thrust bearing in the hub to create a seal. The hub has a return hole in it's casting for excess lube to return internally. It's possible the return hole is restricted. On the other hand, if the machine has been filled with oil, it will probably leak like a siv.
The new lube should be 35 OZ of mobil XPH 222,
Hobart part number is 103881-47 for 32OZ.

Posted on Aug 08, 2009

monomoy

  • 110 Answers

SOURCE: how to adjust bowl height on 20 qu hobart mixer.It

you need to remove splash shield, tilt mixer back,with a long screwdriver adj. the set screwclockwise to decrease clearance for beater to bowl clearance,always use b beater when making adj. clearance should be .054" to .115".also make sure there are no deformities in btm of bowl which can cause you problems.dont forget to vote

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hobart A200 Mixer - what exactly should the grease look like?


The grease is a toffee colour when new. It shouldn't fill the cavity completely. The older a200 mixers are usually very reliable, they need the fiber gear replacing every now and then, other than that it will run on. I've seen some out there that are almost 50 years old and going strong

May 26, 2018 | Hobart Food Mixers

2 Answers

Hobart mixer


hi Gassman, below you will be able to find a link on parts assembly for the mixer, you will have an idea on how to tear off the parts, get them cleaned and place them back, like a regular maintenance.

Hobart A200 Mixer Parts Assembly

More parts assembly for Hobart A200 Mixer

hope this helps.

fb3484b.jpg

Aug 19, 2008 | Hobart A200 Stand Mixer

2 Answers

Hi, I recently bought an old AE200 Hobart mixer from a catering auction...plugged it in & guess what?? does't work. I can hear the motor running, but when I put it in any of the three gears..it...


You will probably want to remove the two silver looking inspection caps. Just carefully pry them up and remove. Then you will be able to get a finger hold on the transmission cover. It has one or two locating or dowel pins that keep it in place. What I normally do is take a soft mallet and tap on the cover while gently lifting one end, then do the same to the other side until you have it loose enough to lift off. I know this because I just spent the last 4 months working on my A200 mixer. I'm not sure exactly what the model AE 200 is, though. I hope this was helpful.

Nov 07, 2011 | Hobart A200 Stand Mixer

1 Answer

Hi bought an a200 mixer it fell over when gettin it out of van now doesnt work at all nothing any ideas


May have damaged the start switch in the back of the motor. Check www.hobartservice.com for your local Hobart office.

Mar 18, 2011 | Hobart A200 Stand Mixer

2 Answers

What is the correct dough hook to get for my 'OLD' A200 Hobart?


Check with your local Hobart office.
www.hobartservice.com Click on "Locate an Office" and enter your Zip.

Jan 20, 2010 | Hobart A200 Stand Mixer

2 Answers

How to change oil in 20 quart hobart mixer and the type of oil


on a a200 there is no oil. this mixer requiers grease. if mixer is leaking oil it is because the grease is broken down .you have to pull tpo cover off mixer remove trans. parts clean out old grease clean all trans. parts reassemble put top cover back on .then make sure mixer runs in all 3-speeds before putting 1.5 cans of -47grease back in grease can be bought @any hobart office

Dec 20, 2009 | Hobart H600 Stand Mixer

3 Answers

Gear problem


Sounds like a sheared key,explain your problem a little more i work for hobart.

Jul 26, 2008 | Hobart A200 Stand Mixer

2 Answers

Motor replacement for A200


If the motor runs and when under a load the planetary stops its not the motor.You either have a sheared key or broken gear in the transmission.

Mar 22, 2008 | Hobart A200 Stand Mixer

4 Answers

NEED A WIRING DIAGRAM FOR A A200 HOBART MIXER


I had a look on google and came up with a service manual. not sure if this has the wiring diagram but the only other thing i can suggest is to contact te manufacturer direct. Go to http://cgi.ebay.com/HOBART-A200-20-QUART-MIXER-SERVICE-PARTS-MANUAL_W0QQitemZ160203114233QQcmdZViewItem
hope this helps.

Feb 02, 2008 | Hobart A200 Stand Mixer

2 Answers

A200T HOBART MIXER


is there a bowl cage on the mixer?if not bypass the timer and see if it starts.

Oct 19, 2007 | Hobart A200 Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Food Mixers Experts

Ross Keen

Level 3 Expert

1364 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Bruce Showalter

Level 2 Expert

133 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...