Question about Samsung Refrigerators

Open Question

My Samsung side by side won't dispense water, it did before. I also just changed the filter. How do I reset ? Please thank you penny

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 184 Answers

SOURCE: filter for the water dispenser

LOOK AT THE TOE PLATE BELOW THE DOORS. THERE SHOULD BE A ROUND DIAL UNDER THE FREEZER DOOR.
TURN IT COUNTER CLOCKWISE ONE QUARTER TURN AND PULL IT OUT. THE DIAL THAT LOOKS LIKE PART OF THE TOE PLATE WILL SLIDE OFF THE END OF THE FILTER. YOU CAN FIND A NEW FILTER AT MOST HOME IMPROVEMENT CENTERS OR YOUR LOCAL WHIRLPOOL DEALER.

Posted on Apr 10, 2008

Ad

Anonymous

  • 46 Answers

SOURCE: Water dispenser won't stop dispensing water!

Hi I dont have the knowledge of your fridge, but I'm just going to throw this idea your way , please forgive me if im wrong :)

Perhaps the problem is due to syphonage, the discharged liquids are creating a vacuum along the line.

Did you reposition the height of any supply hoses ? none of them should be above/higher the outlet source itself.

You could also try installing a inline reverse flow suppressor
(small plastic filter that only allows one-way direction of flow.

Posted on Jun 14, 2008

Anonymous

  • 700 Answers

SOURCE: Water to ice maker isn't filling tray.

what is the inside temperature in the freezer? it has to be below 17 degrees before the ice maker even try's to work

Posted on Dec 20, 2008

Anonymous

  • 2 Answers

SOURCE: In operative water dispenser.

I have GE side by side refrigerator - 2004 model GSH25SGRB SS. From the blog I found out the problem is with frozen water line. If I keep the door water would dispense ( thawing). Or if you disconnect at the bottom ( take the grill out and disconnect) the water would dispense.

I placed a call to GE. The service person came. He said GE could fix with a 3 watt heater. He opened the panel. Pasted a heater. It came in a Y shape form. He connected that to the internal wiring. After some time the water started working.

Part $40. Labor for 15 min work = $210. Total = $250.

This is really should be a recall case. No part broken. They had to design a heater to solve this problem. What a rediculus thing is this. I am trying to call GE and ask to refund.

What a cheat GE!!. F them.

Posted on Jan 07, 2009

Sea Breeze

John Tripp

  • 4656 Answers

SOURCE: frigidaire water dispenser won't work with new filter

The dispenser has a dual water control valves that control ice maker water and dispenser water. To find your parts you will need your refrigerators model number most time found around the fresh food sections door. Below I have a tutorial that may help you determine what may be the problem with dispensing water. Hope this helps, Thanks Sea Breeze

Posted on Oct 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung side by side fridge/freezer ice and water is not working after filter change


If your water and ice maker are not working, you may not have turned your water valve back on. If your water valve is turned on, try rotating your water filter further so that it completely locks as it may not be installed all the way. Once it is completely installed, press the "water" button for approximately three seconds until it turns blue. If this does not solve the problem, you may have a bad filter, here is a replacement filter that you can purchase to install into your refrigerator: http://www.freshwatersystems.com/p-3658-swift-green-sgf-dsb30-compatible-samsung-da29-00003b-refrigerator-filter.aspx

Jun 23, 2013 | Samsung RSG257AARS (241 cu ft) Side by...

1 Answer

How do I change the water filter for the refrigerator, Samaung RF323TE


Page 13 of the User Manual explains where and how to change the water filter RF323TE User Manual
Click link below for instructions
Where Is The Water Filter And How Do I Install It on my French Door or Side-By-Side Refrigerator?

Or click HERE If you have questions or trouble navigating the Samsung site please ask questions and I will try to assist you, Thanks Sea Breeze

Mar 31, 2013 | Samsung RF323TE 31.6 cu. ft. French Door...

1 Answer

Whirlpool side by side fridge won't dispense water.


Most likely the problem is related to a defective water control valve on the dispenser side of the valve. If your model is the ED2FHEXN it will use the=> W10408179 Water Inlet Valve
3_8_2013_2_19_43_am.jpg


You should always turn the water supply off before removing the filter cartridge just to insure less water clean up should a water valve be stuck open. At this point I still believe that the water control valve is at fault for not allowing water flow to the dispenser. Here is a parts manual=> ED2FHEXN Parts Manual and here is a link to your ED2FHEXN User Manual You may get some water flow spraying should there be a valve stuck open but that is not the cause of you not getting water to the dispenser. Your ice maker is still working right? I will be here should you have questions or comments, Thanks Sea Breeze

Mar 05, 2013 | Whirlpool ED2FHEXN Side by Side...

1 Answer

Samsung refrigirator water dispenser works without filter but does not work with filter


Not enough water pressure in supply line to get past filter?
Open valve feeding supply line more and see what happens.

Sep 06, 2017 | Samsung Refrigerators

2 Answers

Samsung refrigerator filter light won't go off after new filter installed


Press and hold "Alarm" touch pad for 3 seconds and it should reset the filter light to blue.

Feb 02, 2013 | Samsung RF4287HARS French Door...

2 Answers

New filter installed. how to turn off "change filter" light


There is usually a reset button near the change filter light. Without the model number I cant tell you exactly where.Please comment me back so I can further assist.

Jul 30, 2011 | Refrigerators

1 Answer

I've got a side by side Whirlpool refridgerator. The Water Filter status light is not indicating. What could be the problem and solution?


There are several pages that explain dispenser programming. This is on page 10 of the owners manual.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change

your water filter. When the water filter status display changes from

"GOOD" to "ORDER," this tells you that it is almost time to

change the water filter cartridge. Replace the water filter cartridge

when the water filter status display changes to "REPLACE." If

water flow to your water dispenser or ice maker decreases

noticeably, change the filter sooner. The filter should be replaced

at least every 6 months depending on your water quality and

usage.

After changing the water filter, reset the status light by pressing

and holding the FILTER button for 3 seconds. The status light will
change from "REPLACE" to "GOOD" when the system is reset.

Changing the Water Filter

1. Press the eject button to release the filter from the base grille.

2. Pull the filter straight out.

3. Turn the cap counterclockwise to remove it from the filter.

IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

4. Align the ridge on the cap with the arrow on the new filter and

turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water

will not be filtered. Simply insert the cap all of the way into the

base grille and rotate the cap until it is firmly in place.

5. Remove the covers from the O-rings. Be sure the O-rings are

still in place after the covers are removed.

6. Push the filter into the base grille. The eject button will pop

back out when the filter is fully engaged.
7. Flush the water system. See "Water and Ice Dispensers."

Water Filter Status Light:

The water filter status light will help you know when to change your water filter.

When the dispenser control panel's water filter status display changes to "ORDER," this tells

you that it is almost time to change the water filter cartridge.

Replace the water filter cartridge when the water filter status display changes to "REPLACE."

The filter should be replaced at least every 6 months depending on your water quality and usage.

NOTE: If water flow to your water dispenser or ice maker decreases noticeably, change the

filter sooner. After changing the water filter, reset the status light.

Details:

Pressing and holding RESET FILTER starts the 3 seconds countdown. Using the dispenser

cancels the countdown AND no dispensing is permitted. The number '3' blinks 3 times and the

'invalid' tone sounds 3 times and user has to release both the pad and the button and press

the button again to start it over

After 3 seconds, the BLUE WATER BARS in the Icon flash and an audible tone sounds 3
times. When the system is reset, the "ORDER" and "REPLACE" icons will disappear from the

display screen. See figure 16.
Note: Users can reset the filter status at any stage.

sea_breeze_131.jpg

If you should need the complete and exact model number and manual with parts manual you will need to enter the Model Number here=> sea_breeze_132.jpg Manuals, Guides and Instructions Please rate this solution, Thanks, Sea Breeze
User manual click HERE

Apr 02, 2011 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

Where is the water filter located and how do i replace it.


The water filter is located in the fresh food or fridge side of the appliance, at the rear - in the upper right hand corner.

steve_con_8.jpg

To change the filter, open the fridge door, clear the top shelf and grasp the filter. All that is needed is to turn the filter to the left about a 1/4 turn for it to drop down. A few drops of water may spill onto the shelf. To install a replacement, remove the protective cover (shown as a red cap above), and position under opening for filter. Gently push upward while turning the filter to the right. The filter will pop in, and as you turn about 1/4 of the way around, it will be drawn up a small amount until seated. At this point it will no longer turn any further.

More info about the filter is below (taken from the manual).

Please rate this reply - thanks!

The water "Filter Indicator" light

• "Filter Indicator" light lets you know when it is time to change your water filter cartridge. The light
will change from green to orange. This tells you that it is almost time to change the current cartridge.
It is recommended that you replace the cartridge when the light changes to red. (see "Install the water filter" section for more information)
• If you install water filter, throw away the first six glassfulls of water filter, or until water flows clearly to flush impurities in the water supply system.


Using the dispenser without the water filter

• You can not use the water and ice dispenser without a water filter cartridge because the water line
blocks at water supply.
Ordering replacement filters
• To order more water filter cartridges, call 1-800-SAMSUNG and ask for accessory Part # DA29-
00003A or contact your authorized Samsung dealer.

Jan 04, 2011 | Samsung RS265LABP Side by Side...

1 Answer

I have a Maytag side by side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house in June. The change filter light came on a few weeks ago and I can't get it...


I have a Maytag side by side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house the change filter light came on and I can't get it to go off. How do I reset the change filter light (it's not time to change the filter)? The model # is MSD2732GRW and I don't have a manual for this refrigerator. Thanks!!

Sep 07, 2010 | Maytag Refrigerators

1 Answer

Water filter warning light has come on


Hello. When the water filter warning light comes on it is time to replace the water filter. Once the filter is replaced you will have to reset the warning light. To do that Hold the Lock/Unlock Button and the Water Dispensing Button for (3) Seconds. The Change Filter Light will Blink and Reset. Joe

please rate my answer as very helpful. Thanks.

Apr 21, 2010 | Maytag MSD2756GES Side by Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Paul

Level 2 Expert

381 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...