Question about Lexmark X5470 All-In-One InkJet Printer
Nothing is else the power is not turning off or on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It is most likely a very slow fill problem ,either the cold or hot water supply is restricted and the machine cannot sense the right water temp. and will shut down .
Machine cannot wash properly with a small amount of water.
Ckeck ,the screens in the water valve or at the hoses at the top where the faucets are ,clean them or replace them but never leave them out .
Posted on Dec 28, 2008
Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Posted on Mar 08, 2009
If you do not have the disk you must download the software from Internet, follow instructions below,
Click here:Official Lexmark Drivers and Software
A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:
Posted on Jun 02, 2009
Is the USB cable back in place? Try holding down the #9 button and the select button while you are powering up the unit. If that fails try pressing the select button after powering up the unit. I had a HP all in one 7170 and during a WILD lightning show I got hit through the phoneline. Zap "All Gone!" I called HP support and they gave me these two steps to try, hope one works for you, if not it's time to go shoppin.
Posted on Jul 25, 2009
Tips for a great answer:
Try to rebrick you printer by pulling out power supply, black box where the
power cord is plugged in at the back of the printer, and put it back after 30
seconds. This will reset your printer.
If that doesn't help, try to plug your printer into a different known working power outlet.
If problem continues, please contact Lexmark Technical Support Center for additional assistance.
Aug 25, 2011 | Lexmark X5470 All-In-One InkJet Printer
Aug 19, 2009 | Lexmark X5470 All-In-One InkJet Printer
Mar 12, 2017 | Lexmark X5470 All-In-One InkJet Printer
Apr 25, 2009 | Lexmark X5470 All-In-One InkJet Printer
Dec 18, 2008 | Lexmark X5470 All-In-One InkJet Printer
Sep 09, 2008 | Lexmark X5470 All-In-One InkJet Printer
Aug 26, 2008 | Lexmark X5470 All-In-One InkJet Printer
Aug 22, 2008 | Lexmark X5470 All-In-One InkJet Printer
Aug 19, 2008 | Lexmark X5470 All-In-One InkJet Printer
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: