Question about Canon Cameras
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1. If the camera can not focus on a subject, or can not determine the appropriate exposure setting, the camera will beep and disable the shutter button. This is to avoid improper processing of the image. This is usually due to either poor lighting conditions or movement. 2. The camera Flash Element requires ten seconds to recharge between images. Although the camera is ready to continue capturing images almost immediately in bright (daylight) settings, if you are using Flash photography the Flash element will need to charge between shots. If you try to take a picture before the Flash is charged, the camera will beep and disable the shutter button. Once the Flash unit is fully charged (10 seconds), the camera is ready to continue. 3. The batteries may be running low. LCD Display, Flash, and Playback use much more power than taking pictures. It is possible to quickly consume battery power, even if you are not taking many pictures. Try turning the Mode Dial to the OFF position to recycle power. If the camera beeps and will not take a picture under normal conditions, you may need to change batteries.
Posted on Sep 11, 2005
SOURCE: Canon MV700 Mini DV Digital...
NAAAA all of my years I have never had a ccd open up where you got no picture at all!! Most of the times its a small line or discoloration or a pixle or a group of pixles out. The most common problems with a camcorder that has no picture on the camera is a stuck shutter or iris. you can turn on the camcorder and tap on the lens around the middle and sometimes it will open up. now if this fails then you have failed capacitors in the camera section and most of the time it dosent pay to repair as the entire board has toi be replaced. sorry windman sorry silly girl.
Posted on May 10, 2006
SOURCE: TV SCREEN GOES BLANK
Yes your inverter is bad, I have the same problem my set is about 1 and 1/4 years old. Because Olevia makes a terrible product there inverters are attached directly on to the panel, which means they will only sell the inverter along with the panel i.e $700+ to replace + $100 dollars labor if u don't know how to fix it ur self. I am currently searching to find the manufacture that makes the inverters because olevia will not disclose that information. I believe it is darfon, if so the inverter should cost about $150-200 depending. If you dont believe you can fix it ur self ur best bet is try and sell the set for scrap take ur $100 or so dollar and buy a quality product! Oh and dont call there support they will tell 10 different things before u find out this long for seen truth!
Posted on Jun 20, 2008
SOURCE: u600 screen blank
Probably all due to a faulty flex cable that connects the screen to the main board.
I had simmilar problems so I replaced the cable and now the phone is fine.
Posted on Oct 16, 2008
Tips for a great answer:
Jan 07, 2014 | Canon EOS Rebel Ti 35mm SLR Kit w/ 28-90mm...
Jun 02, 2011 | Canon PowerShot SX210 IS Digital Camera
May 05, 2011 | Canon PowerShot SX210 IS Digital Camera
Jan 24, 2011 | Canon PowerShot SX210 IS Digital Camera
Jan 06, 2011 | Canon PowerShot SX210 IS Digital Camera
Dec 23, 2010 | Canon PowerShot SX130 IS Digital Camera
Dec 03, 2010 | Canon PowerShot SX210 IS Digital Camera
Aug 25, 2010 | Canon PowerShot SX210 IS Digital Camera
240 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: